- •เครื่องวัดเเรงสั่นสะเทือน(Vibration Meter)
|
 |
FLUKE Vibration Meter: 0 to 50g, 10 to 1000/4000 to 20,000, 0 to 307.24 in/sec, +/-5% Accuracy
- Low Frequency Range (overall measurement)10-1000 Hz
- High Frequency Range (CF+ measurement) 4000-20,000 Hz
- Severity Levels Good, satisfactory, unsatisfactory, unacceptable,Vibration Limit 50 g peak (100 g peak-peak)
- A/D Converter , 16-bit,Signal to Noise Ratio,80 dB
|

|

|
 |
TPI 9080 TEST PRODUCTS INTL. Vibration Meter: 0.01 g to 60g, 1kHz to 10kHz Bearings/2/10 Hz to 1kHz ISO
- Collect data
- Trend data using VibTrend software
- Standard Cable mounted accelerometer with magnet
- Built-in Bluetooth communication capability
- USB docking station to download to a PC
- ISO built-in Alarms
|

|

|
 |
EXTECH SDL800 Vibration Meter/Datalogger: 200 m/sq sec/20.39g/656 ft/sq sec, 10 to 1k, Backlit LCD
- Remote vibration sensor with magnetic adapter on 47.2"(1.2m) cable
- Wide frequency range of 10Hz to 1kHz
- Basic accuracy of ±(5% + 2 digits); Meets ISO2954
- RMS, Peak Value or Max Hold measurement modes
- Adjustable data sampling rate
- Offset adjustment used for zero function to make relative measurements Large backlit LCD
|

|

|
 |
MONARCH 6400-011 Vibration Tester: 0.01 to 19.99g, 10 to 10 K, 0.01 to 19.99 in/sec, 0.1 to 199.9 mm/sec, LCD
- Ease of use. No training. interactive vibration training available.
- Instant assessment of vibration. Plan your repairs.
- Power to trend defects and eliminate unplanned failures.
- Hear what you see in the digital display. You do not have to give up a proven troubleshooting technique-"listening
|

|

|
 |
EXTECH 407860 Digital Vibration Meter Kit: 2 to 656 ft/sq sec or 0.5 to 200 m/sq sec, 10 to 1 K, LCD RMS or Peak
- Value measurement modes
- Remote vibration sensor with magnetic adapter on 39"(1m) cable
- Manual/Auto store/recall up to 500 readings
- Wide frequency range of 10Hz to 1kHz
- Auto shut-off saves battery life
|

|

|
 |
TPI 9070 TEST PRODUCTS INTL. Vibration Meter: 0.01 g to 50g, 1kHz to 10kHz Bearings/2/10 Hz to 1kHz ISO
- ISO Built-in Alarms
- Easily identify bearing problems with BDU Reading
- 800 line FFT (spectrum)
- Ruggedized IP67 case
- 3-year Limited Warranty
|
|
|
 |
EXTECH VB400 Pen Vibration Meter: 200 m/sq sec/20.39g/656 ft/sq sec, 10 to 1k, 19.99cm/s/200mm/s/7.87in/s
- Resolution to 1ft/s2; 0.01g; 0.1m/s2 and 0.02in/s; 0.01cm/s; 0.1mm/s
- Basic accuracy of ±(5% + 2 digits)
- Zero adjustment
- Data Hold freezes the reading in the display
- Water and dust resistant to IP65
- Low battery indicator
|

|

|
 |
GENERAL TOOLS VB10 Vibration Data Logger: -16 to 16g, 0 to 60, +/-5% Accuracy, USB
- Acceleration measurement range: -16g to 16g
- Acceleration measurement accuracy/resolution: ±0.5g/0.0039g
- Frequency range: 0 to 60 Hz
- Data logging capacity: 327,600 data points in 16MByte flash memory
|

|

|
 |
TPI 9085 Vibration Meter: 1 to 1000 mV/g, BDU: 1 to 10 kHz/g: 10 Hz to 10 kHz/ISO: 2/10 Hz to 1 kHz,
- Collect vibration data
- Trend data using VibTrend PC software
- Standard Cable mounted accelerometer with magnet
- USB docking station to download to a PC
- ISO built-in Alarms
|

|

|

|
TPI 9084 Vibration Meter: 1 to 1000 mV/g, BDU: 1 to 10 kHz/g: 10 Hz to 10 kHz/ISO: 2/10 Hz to 1 kHz
- Collect vibration data
- Trend data using VibTrend PC software
- Standard Cable mounted accelerometer with magnet
- USB docking station to download to a PC
- ISO built-in Alarms
|

|
|
 |
MONARCH 6400-012 Vibration Meter: 0.01 to 19.99g, 10 To 10 K, 0.01 To 19.99 in/sec, 0.1 To 199.9mm/sec, LCD
- Vibration Sensor Piezoelectric Accelerometer 100 mV/g
- Display 3.5 digit LCD with measurement, Hold and Low Battery indicators
- Range
- Acceleration: 0.01 to 19.99 g (RMS)
- Velocity: 0.01 to 19.99 in/sec (RMS) 199.9 mm/sec(RMS)
- 0.20 to 500 mm/sec (RMS)
|

|

|
 |
TPI 9080K1 Vibration Meter w/Vib Trend Software: With Cal. Cert., 0 to 50g, 393.6in/s/9999mm/s
- Collect data
- Trend data using VibTrend software
- Standard Cable mounted accelerometer with magnet
- Built-in Bluetooth communication capability
- USB docking station to download to a PC
- ISO built-in Alarms
|

|

|
 |
TPI 9080-EX TEST PRODUCTS INTL. Vibration Tester: With Cal. Cert., 1 to 1000 mV/g, 10 Hz to 10 kHz, 720mm/sec
- Vibration Frequency ranges: 0.2 Hz-1kHz ISO& 2Hz - 3kHz
- Frequency resolution: 100 / 200 / 400 / 800 lines
- Displayed amplitude units: Acceleration in g/velocity in inches per second or mm per second/Bearing damage in BDU, Displayed frequency units: Hz, CPM or RPM
- Input range: +/- 50 g
|

|

|
 |
TPI 9071 TEST PRODUCTS INTL. Vibration Meter: 1 to 10,000 mV/g, 393.6 in/s/9999 mm/s, Full Color LED
- Full Color OLED Display
- Standard Cable mounted accelerometer with magnet
- Easily identify bearing problems with BDU Reading
- Easily identify problems with built in band filters
- 1X (unbalance)
- 2X (misalignment)
- 3X (looseness)
- ISO Built-in Alarms
|

|

|
 |
REED INSTRUMENTS R7000SD Vibration Meter: 656ft/s2, 200m/s2, 20.39g, 10 to 1 kHz, LCD, Bearing/Gear Check
- Measures velocity and acceleration to determine vibration level
- User selectable unit of measure (metric or imperial)
- RMS, Peak hold, Data hold and Max/Min functions
- 10Hz to 1kHz frequency range
- Basic accuracy of ±5%
|

|

|
 |
EXTECH 407860-NIST, Digital Vibration Meter Kit: With Cal. Cert., 2 to 656 ft/sq sec or 0.5 to 200 m/sq sec, LCD
- Remote Vibration Sensor With Magnetic Adapter On 39" (1m) Cable
- Wide Frequency Range Of 10Hz To 1kHz
- Resolution To 0.5m/s2, 0.5mm/s, and 0.005mm
- Basic Accuracy Of ±(5% + 2 digits)
- NIST Calibration
- Record Mode Stores The Maximum And Minimum Values For Later Recall
|

|

|
 |
EXTECH SDL800-NIST, Vibration Meter/Datalogger: With Cal. Cert., 200 m/sq sec/20.39g/656 ft/sq sec, 10Hz to 1kHz
- Remote vibration sensor with magnetic adapter on 47.2" (1.2m) cable
- Basic accuracy of ±(5% + 2 digits); Meets ISO2954
- RMS, Peak Value or Max Hold measurement modes
- Adjustable data sampling rate
- Wide frequency range of 10Hz to 1kHz
|

|

|