Thai Baht Converterเครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10184]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [870]
•Hardness tester / hardness tester
Satotec rebound type hardness tester LM-100 D type (general purpose)
■ Compact size
■ Sensor separation type ・ Sensor (impact device) that can be selected according to the application
■ With main body recording function
■ Iron (cast iron), gray cast iron, nodular cast iron, aluminum, brass, bronze, copper, stainless steel, forged steel, alloy tool steel
■ From an abundant lineup to suit your needs
| product name | ||
|---|---|---|
| Satotec Rebound Hardness Meter LM-100 D Type (General Purpose) Hardness Reference Piece Test Block / AA Battery Included | t |
Satotec Rebound Hardness Tester LM-500
■ Compact type for easy and anywhere measurement by anyone
■ Metal hardness measuring instrument for iron (cast iron), gray cast iron, nodular cast iron, aluminum, brass, bronze, copper, stainless steel, forged steel, alloy tool steel
■ Abundant according to the application Impact device can be selected from various lineups (impact device)
| product name | ||
|---|---|---|
| Satotec Rebound Hardness Meter LM-500 D Type Hardness Reference Piece with Test Block | t |
Satotec Support Ring (Adapter for Rebound Hardness Meter) MJ-RING
Support ring (adapter for hardness tester) essential for measuring curved parts It is possible to measure the R surface by attaching it to the tip of the impact device. It is possible to measure the inside and outside of the R surface and spherical surface. .. A support ring set that can measure hardness of various shapes.
| product name | ||
|---|---|---|
| Satotec support ring (adapter for rebound type hardness tester) MJ-RING (12 pieces) MJ-RING |
Teclock Rubber / Plastic Hardness Meter (Durometer) Analog GS Series
Analog rubber / plastic hardness tester (dual meter) Calibration documents can be issued: Paid
| product name | type | Use | Spring load value | ||
|---|---|---|---|---|---|
| Rubber / Plastic Hardness Meter GS-719N | A | General rubber | 550-8050mN | ||
| Rubber / Plastic Hardness Meter GS-719G | A needle type | General rubber (for medium hardness) | 550-8050mN | ||
| Rubber / Plastic Hardness Meter GS-721N | E (AO) | Soft rubber (for low hardness) | 550-8050mN | ||
| Rubber / Plastic Hardness Meter GS-721G | E needle type | Soft rubber (for low hardness) | 550-8050mN | ||
| Rubber / Plastic Hardness Meter GS-720N | D | Hard rubber (for high hardness) | 0-44450mN | ||
| Rubber / Plastic Hardness Meter GS-720G | D needle type | Hard rubber (for high hardness) | 0-44450mN | ||
| Rubber / Plastic Hardness Meter GS-720R | Dφ18mm / stand combined use | Hard rubber (for high hardness) | 0-44450mN | ||
| Rubber / Plastic Hardness Meter GS-719R | Aφ18mm / stand combined use | General rubber (for medium hardness) | 550-8050mN | ||
| Rubber / Plastic Hardness Meter GS-719P | A pocket type | General rubber (for medium hardness) | 550-8050mN | t |
Portable Hardness Meter HH-411 Repulsion Type [Mitutoyo]
Anyone can easily perform a hardness test with one touch, so it can be widely used for various test subjects in the field.
Calibration documents can be issued: Paid
| product name | Code No. | ||
|---|---|---|---|
| Mitutoyo Repulsion Hardness Meter HH-411 | 810-299 (JIS), 810-298 (ASTM) | P t |
Satotec hardness tester (hardness tester) HM-6561JP
It can inspect the hardness of various metals such as steel, stainless steel, castings, aluminum, bronze, and true casting.
| product name | ||
|---|---|---|
| Satotec Portable Hardness Meter HM-6561JP D type (general purpose) Hardness standard piece test block / with AAA battery
|
t |
Portable hardness tester TIME5100 [Domestic genuine]
A portable hardness tester that can measure the hardness of metal. Equipped with a dedicated impact device ■ Equipped with accurate and easy operation
■ Equipped with a USB terminal
■ Measurement of steel, cast iron, alloy steel, stainless steel, aluminum alloy, and copper is possible
| product name | ||
|---|---|---|
| Portable hardness tester TIME5100 (authorized distributor) Test block HLD, USB cable, cleaning brush, 2 AAA batteries included | t |
Satotec Pencil Scratch Hardness Tester MJ-PHT
Pencil scratch hardness tester MJ-PHT is a measuring instrument that measures the hardness of the coating film using a pencil. It is used to measure the adhesion strength and hardness of the coating film.
■ Supports loads of 500g, 750g, and 1000g
■ JIS K-5600 (Pencil scratch test) ・ Based on JIS K-5400
| product name | ||
|---|---|---|
| Satotec Pencil Scratch Hardness Tester MJ-PHT [Japan Paint Inspection Association certified Mitsubishi pencil uni14 (6B-6H), pencil sharpener, weight (750g / 1000g), horizontal pad, eraser, sandpaper, with carrying case]
|
t |
Satotec Digital Rubber / Plastic Hardness Tester HT6510A
Hardness measurement of soft rubber, plastic, soft plastic, rubber, synthetic rubber, silicone vinyl, felt, leather, etc.
| product name | ||
|---|---|---|
| Satotec Digital Rubber / Plastic Hardness Tester HT6510A
|
t |
TECLOCK Rubber / Plastic Hardness Meter Deep Hole Durometer GS-719H / GS-720H
JIS K 6253 compliant Durometer If the measurement surface is uneven, irregular and has few flat surfaces, or if the bottom of a deep dent is deep, the pressurized surface of the durometer may not be in close contact (cannot reach) and correct measurement may not be possible. I have. In such a case, make the pressure surface smaller or longer. Calibration documents can be issued: Paid
| product name | type | Use | standard | Spring load value | Pressurized surface mm | ||
|---|---|---|---|---|---|---|---|
| Rubber / Plastic Hardness Meter Deep Hole Durometer GS-720H | D | Hard rubber deep hole (fine hole) type | JIS K 6253 | 0-44450 | φ12 | ||
| Rubber / Plastic Hardness Meter Deep Hole Durometer GS-719H | A | General rubber deep hole (fine hole) type | JIS K 6253 | 55-8050 | φ12 | t |
TECLOCK Rubber / Plastic Hardness Meter GS-701N Standard
Measurement target: Sponge, felt, soft rubber, hard foam, clay clay evenly divided scale (1 scale 1 degree), so it is easy to read. Compliant with JIS K7312. (Regulations on physical test methods for polyurethane elastomers)Calibration documents can be issued: Paid
| product name | ||
|---|---|---|
| Rubber / Plastic Hardness Meter GS-701N Standard | t |
Imada Food Hardness Measuring Unit FCA-DSV-50N
Easy measurement of food hardness! Easy operation with the lever. A measurement stand that enables compression tests with a constant pushing force. You can use the attached attachment to "crush / push, cut / split". It is possible to easily import and manage the acquired data on a PC. * PhoCash on delivery is not possible Calibration documents can be issued: Paid
| product name | ||
|---|---|---|
| Imada Food Hardness Measuring Unit FCA-DSV-50N-1 | ||
| Imada Food Hardness Measuring Unit FCA-DSV-50N-2 | t |
Softness sensor SOFTGRAM --Young's modulus (elastic modulus) measurement / softness measurement
world's first! Tuning fork type softness sensor Softness can be easily and non-destructively quantified! Ensuring reproducibility! Only 150g. SOFTGRAM makes it easy for anyone to visualize and quantify the "softness" of cosmetics, foods, materials, etc., which can only be understood by touch, with a physical quantity called Young's modulus (elastic modulus).
หมวดหมู่ ใน •Hardness tester / hardness tester
แสดงหมวดหมู่ที่ 1-2 จากทั้งหมด 2 หมวด
สินค้า ใน •Hardness tester / hardness tester (0 ชนิด)
แสดงสินค้าที่ 0-0 จากทั้งหมด 0 ชิ้น
ติดต่อสอบถาม #ภาษาไทย
Contact : Thai/English
เว็บเพื่อนบ้าน
ระบบสมาชิก
Realtools Asia(ศูนย์รวมเครื่องมือวัดและชุดทดสอบอุตสาหกรรม)
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ
สินค้าในตะกร้า ({{total_num}} รายการ)
ขออภัย ขณะนี้ยังไม่มีสินค้าในตะกร้า
ราคาสินค้าทั้งหมด
฿ {{price_format(total_price)}}
- ฿ {{price_format(discount.price)}}
ราคาสินค้าทั้งหมด
{{total_quantity}} ชิ้น
฿ {{price_format(after_product_price)}}
ราคาไม่รวมค่าจัดส่ง
➜ เลือกซื้อสินค้าเพิ่ม