Two in one. Non-contact tachometer and stroboscope. Calibration document can be issued.
Only 300 g of lightweight, dry cell type rotation measurement is possible.
Digital Stroboscope: 100RPM to 100,000RPM Digital Tachometer: Measuring distance up to 5 to 99, 999RPM The
distance that can be measured with high accuracy
up to 5-15 cm has maximum / minimum / final value display function. The coarse adjustment dial, fine adjustment dial
Non-contact tachometer and spout can be used to make a torobosco. Ideal for measuring the rotation of gears, fans, motors, pumps, etc.
product name | ||
---|---|---|
Stroboscope DT-2259 |
Contact tachometer: 0.5 to 19.999 RPM, non-contact tachometer: issue of 5 to 99.999 RPM calibration documents
High accuracy of 0.1% rdg front-side contact tachometer, rear non-contact tachometer possible
Deca character / Possible to measure circumferential speed with circumferential speed ring ● Data output to PC possible
product name | ||
---|---|---|
Digital tachometer DT-2230 [non-contact + contact] |
It is possible to issue a calibration document with two modes of Low mode of 0.5 to 2000 rpm and High mode of 15 to 10000 rpm
A compact hand-held type contact digital tachometer that combines ease of use and high performance. You can obtain the r / min direct reading measurement result with the display at hand just by holding it with one hand and pressing it lightly against the rotary shaft.
product name | ||
---|---|---|
Digital hand tachometer HT-3200 [Ono Sokki] |
Publication of rotational speed calibration documents from 30 to 50000 r / min Possible to attach a
single reflection mark as a mark of rotation, with the tester facing the reflection mark and pressing the measurement button
Memory function, multi-pulse measurement function
product name | ||
---|---|---|
Non-Contact Digital Tachometer HT-4200 [Ono Sokki] |
■ Able to issue new standard calibration document of tachometer based on safety measurement
■ Contact measurement / non-contact measurement ■ Analog output / pulse output (FT3406 only)
product name | ||
---|---|---|
Tako high tester FT3405 [HIOKI setting] | ||
Tako high tester FT3406 [HIOKI setting] |
High-intensity xenon arc tube adopted. Compliant with EN61010. Issuable of issuance of calibration documents
820g small and light type easy to carry
Number of light emission: 60 to 32000 RPM Resolution: AC adapter included with 0.1 RPM (<1000 RPM), 1 RPM (≧ 1000 RPM) Active in a wide range of places such as places where there is no
drive
power supply with 4 types of rechargeable batteries and narrow places. Use the dial and four buttons to adjust the rotational speed
. Ideal for measuring the rotational speed of high-speed rotating objects such as engines, motors and fans.
product name | ||
---|---|---|
Stroboscope DT-2349JP |
Two in one. Non-contact tachometer and stroboscope. Calibration document can be issued.
Only 300 g of lightweight, dry cell type rotation measurement is possible.
Digital Stroboscope: 100RPM to 100,000RPM Digital Tachometer: Measuring distance up to 5 to 99, 999RPM The distance that can be measured with high accuracy up to 5-15 cm has maximum / minimum / final value display function. Coarse adjustment dial, fine adjustment dial Non-contact tachometer and stroboscope can be used properly. Ideal for measuring the rotation of gears, fans, motors, pumps, etc.
product name | ||
---|---|---|
Stroboscope DT-2259 |
■ optical type non-contact type rotary meter capable contactless measurement of rotational speed
■ small objects and difficult to access useful measurement at locations
of check or not the yarn feeding unevenness of ■ printer color shift and weaving machines every, It is possible to check if there is a problem with gear engagement
product name | ||
---|---|---|
LED Stroboscope testo 477 [Test-] |
Red / yellow / green color judgment by ISO diagnosis. Calibration document available
Up to 800 lines of FFT analysis. Velocity / acceleration g / Bearing degradation degree BDU vibration analysis: Vibration analysis software with unbalance, misalignment, looseness trend line trend trend display Multiple FFT data in 3D display in time series Quickly find the root cause of the equipment condition! Simple and revolutionary innovation!
product name | ||
---|---|---|
Vibration meter TPI-9080 data logger / with FFT analysis function |
Possible to issue red / yellow / green color judgment calibration document by ISO diagnosis
Speed ・ acceleration g ・ Bearing deterioration BDU vibration analysis: judgment of imbalance, misalignment, looseness up to 800 lines of FFT analysis
product name | ||
---|---|---|
Vibration meter TPI-9071 (separate type) |
Possible to issue red / yellow / green color judgment calibration document by ISO diagnosis
Speed ・ acceleration g ・ Bearing deterioration BDU vibration analysis: judgment of imbalance, misalignment, looseness up to 800 lines of FFT analysis
product name | ||
---|---|---|
Vibration meter TPI-9070 | ||
Magnet base A9073 (for TPI-9070/9071/9080) |
Bearing Checker BC100 is SPM's original measuring instrument that can monitor the status of bearings (ball bearings, roller bearings) of rotating machinery quickly and easily. Many mechanical failures are caused by damage to the bearings. Shock pulse measurement range: -9 to 90 dBsv Temperature measurement range: -10 to + 160 ° C Electronic stethoscope: earphone mode 8 levels
product name | ||
---|---|---|
Bearing checker BC100 |
Vibration measurement is possible only by pressing it. Vibration measurement with less variation is possible!
An integrated vibration meter with a vibration pickup and digital display.
Measurement item: Available in acceleration , speed , displacement handy (120 g)
Remote switch measurement enables measurement without the influence of camera shake. Judgment of ISO 2372 motor vibration standard Hold function, auto power off function. Acceleration: 0.1 to 180 m / s2 Speed: 0.1 to 199 mm / sDisplacement: 1 to 3000 μm Magnetic base, remote switch with soft case
product name | ||
---|---|---|
Pen-type Multifunctional Vibration Meter VB-03 |
By measuring the metal wear powder contained in the grease in the bearing, it is possible to confirm the wear condition at the stage before the vibration value becomes high. Possible to issue proofs
product name | ||
---|---|---|
Grease iron powder densitometer SDM-72 |
By measuring the metal wear powder contained in the lubricating oil in the bearing, it is possible to confirm the wear condition at the stage before the vibration value becomes high. Possible to issue proofs
product name | ||
---|---|---|
Lubricant oil and iron powder concentration checker SDM-73 |