รหัสสินค้า | SKU-13853 |
หมวดหมู่ | เครื่องวัดการสั่นสะเทือน(Vibration Meter) |
ราคาปกติ | |
ลดเหลือ | 0.00 บาท |
สถานะสินค้า | Pre-Order |
ลงสินค้า | 19 ม.ค. 2566 |
อัพเดทล่าสุด | 5 ก.ย. 2568 |
คงเหลือ | 1 ชิ้น |
จำนวน | ชิ้น |
![]() |
VIBER X1 ™ is an analog vibration measuring instrument for control and measurement of the mechanical vibration and bearing condition. A flexible instrument that fits in every maintenance engineer's pocket.
Dense built-in charger, selectable frequency ranges and interchangeable accelerometer (BNC connector), and just as easy and reliable as its predecessor.
Measure very accurate right down to the 2Hz. with the push of a button is changed frequency range (2Hz-1000 Hz, 10-1000 Hz, 2Hz-givarmax, 10 Hz-givarmax).
Interchangeable accelerometer and cable provides economy and safety because it can easily be replace if something breaks and that you do not need to be close to rotating parts.
Clear LED indication displays the frequency range that is selected.
Charger, manual, accelerometer with 1 m cable and flat magnet and soft bag with shoulder strap and belt clip included.
Vibration transducer |
Accelerometer |
Standard 100 mV/g ± 15% |
(Adjusted to the instrument) |
Input amplitude range |
Vibration |
Max 20 g RMS |
With other sensor up to 200 g |
Bearing condition |
Max 5 gBC |
||
Dynamic range |
60 dB (156,1 Hz) |
|
|
Frequency range |
Vibration |
2 - 1000 Hz 10 - 1000 Hz 2 - Max Hz 10 - Max Hz |
User selectable |
Bearing condition |
0.5 to 16 kHz |
|
|
Vibration units |
g-value, mm/s |
User selectable |
|
Amplitude presentation |
RMS |
||
Signal processing |
Analogous |
||
Accuracy |
Vibration |
± 3 % |
Full scale is 20g for acceleration other units are frequency dependent. All values are related to the normal acceleration 9,80665 m/s2 at sea level and 45 ° latitude |
Bearing condition |
± 5 % |
Over 0,05 gBC |
|
Battery |
Rechargeable Lithium |
Capacity for batteries is 2300 mA/h for lithium |
|
Operating time |
Min 24 or 12 hours for a full charged battery park |
Operating times depends on the intensity on the LED. Ca 24 hours for Lithium. |
|
External charger |
5,0 V Lithium |
|
|
LED display |
7 segment |
|
|
Enclosure protection |
IP 65 |
|
|
Operating temp. range |
- 20 to 60 °C |
|
|
Weight |
285 gram |
Instrument, including battery and transducer |
|
Size (L x W x H) |
125mm x 70mm x 40 mm |
||
OBS. You should avoid using other accelerometers because of instrument calibration. If you change the accelerometer, the instrument must be calibrated to preserve the accuracy. |