เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10259]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]
Product name
|
Form
button is pushedproduct explanation |
The example of a use, and the main features
|
Measurement range
|
|||
Torque meter
|
CD-100M/10M
|
everyday check of an electric driver Etc.
It durability-improves also to the high torque which starts suddenly. |
CD-100M
|
0.10〜10
|
N・m
|
|
CD-10M
|
0.010〜1
|
N・m
|
||||
DI-9M-8/08
|
everyday check of an electric driver torque driver Etc.
A wide measurement range With [ in OW joint ] no rolling-back work |
DI-9M-8
|
0.020〜8
|
N・m
|
||
DI-9M-08
|
2.0〜800
|
mN・m
|
||||
NDI-800CN
/80CN |
Routine inspections became more convenient.
Strengthened visibility, usability, connectability on taking over good points of DI-9M series |
NDI-800CN
|
0.020〜8
|
N・m
|
||
NDI-80CN
|
2.0〜800
|
mN・m
|
||||
Torque tester
|
DIS-IP
Series |
Management of various torque wrench torque drivers
A small space is also Installation O.K. with a dissociated type. It is from low torque to high torque at abundant variations. A printable character is legible at 1.5 times of the former (ratio of our company). |
-IP05
|
2.0〜500
|
mN・m
|
|
-IP5
|
0.020〜5
|
N・m
|
||||
-IP50
|
0.20〜50
|
N・m
|
||||
-IP200
|
2.0〜200
|
N・m
|
||||
-IP500
|
2.0〜500
|
N・m
|
||||
-IPS5/20
|
0.20〜20
|
N・m
|
||||
DI-1M-IP
Series |
Management of an oil pulse tool etc.
It is highly precise and is a small light weight. It installs in a work line and an effect is demonstrated to the scheduled inspection of a tool.The number of blows and a torque value are expressed as a blow counter. |
-IP50
|
030〜50
|
N・m
|
||
-IP200
|
3.0〜200
|
N・m
|
||||
-IP500
|
3.0〜500
|
N・m
|
||||
DI-4B-25
|
Everyday check of a small impact tool air driver and a quantity output electric driver
Blow counter built-in. Measurement is possible, with a socket attached. |
0.30〜25
|
N・m
|
|||
Torque checker
|
DIS-RL
Series |
the last check of a screw bolt Etc.
A detection part is very compact by the separate type. Power is demonstrated to narrow torque measurement of a place, and measurement of minute torque. |
-RL005
|
0.2〜50
|
mN・m
|
|
-RL05
|
2.0〜500
|
mN・m
|
||||
-RL2
|
0.010〜2
|
N・m
|
||||
-RL6
|
0.10〜6
|
N・m
|
||||
Digital torque driver
|
NDID-150CN
|
Bolting of a screw bolt
.Adjust the torque and click it Torque and tightening number are also recorded |
NDID-
150CN |
0.020〜1.5
|
N・m
|
|
DID-05/4
|
Bolting of a screw bolt
Lightweight compact. It forgets to shut, binds tight to prevention and is with a number counter. By roller clutch adoption, it is a working efficiency rise. |
DID-05
|
2.0〜500
|
mN・m
|
||
DID-4
|
0.020〜4
|
N・m
|
||||
Digital torque wrench
|
DIW-120/75/20
/15 |
Bolting of a screw bolt
Lightweight compact. By roller clutch adoption, it is a working efficiency rise. |
DIW-120
|
2.0〜120
|
N・m
|
|
DIW-75
|
0.20〜75
|
N・m
|
||||
DIW-20
|
0.20〜20
|
N・m
|
||||
DIW-15
|
0.20〜15
|
N・m
|
||||
Screw bundle counter
|
ECT Series
|
The bolting number check of a screw
The signal from an electric driver is counted. A check is easy with sound and light. It is a malfunction check by the timer function. There is also a type corresponding to a work sensor and it is. |
ECT-02
|
A low price and a short form
|
||
ECT-03
|
Work sensor correspondence
|
|||||
Joint for measurement
|
OW Series
|
It is used for torque measurement of an electric driver.
Measurement is completed only by the work of the direction of bolting.It OKs with a bit attached. Since it is not influenced of fricative, management of the torque stabilized for a long period of time is possible. |
OW-025
|
Max
|
0.25
|
N・m
|
OW-10
|
Max
|
1
|
N・m
|
|||
OW-20
|
Max
|
2
|
N・m
|
|||
OW-60
|
Max
|
6
|
N・m
|
|||
SJ Series
|
A former type coil spring compression system.
With no worries about disassembly of the adapter twisted for returning too much with special structure. |
SJ-50
|
Max
|
5
|
N・m
|
|
SJ-10
|
Max
|
1
|
N・m
|