เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10270]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]
รหัสสินค้า | SKU-08919 |
หมวดหมู่ | เครื่องวัดความสั่นสะเทือนและเซ็นเซอร์โพรป(Accelerometer),PCE |
ราคาปกติ | |
ลดเหลือ | 0.00 บาท |
สถานะสินค้า | Pre-Order |
สภาพ | สินค้าใหม่ |
ลงสินค้า | 28 ส.ค. 2564 |
อัพเดทล่าสุด | 28 ส.ค. 2564 |
คงเหลือ | 1 ชิ้น |
จำนวน | ชิ้น |
Technical specifications | |||
Typical measuring ranges and alarm settings | |||
Parameter / gas | Symbol | Range | Steps |
Flammable gases * | LEL (catalytic) | 0... 100 % LEL | 1% |
Dioxide | O2 | 0... 25 Vol.% | 0.1% |
Carbon dioxide | CO2 | 0... 5 Vol.% | 0.01% |
Carbon monoxide Hydrogen sulfide** |
CO/H2S | (CO) 0...500 ppm (H2S) 0...100 ppm |
(CO) 1 ppm (H2S) 0,1 ppm |
Other gas sensors available upon request. Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details.
|
|||
Ammonia | NH3 | 0... 100 ppm | 1 ppm |
Sulfur dioxide | SO2 | 0... 10 ppm | 0.1 ppm |
Ozone | O3 | 0... 1 ppm | 0.01 ppm |
Chlorine | CI2 | 0... 100 ppm | 0.1 ppm |
Chlorine dioxide | CIO2 | 0... 1 ppm | 0.01 ppm |
Nitrogen monoxide | NO | 0... 1000 ppm | 1 ppm |
Nitrogen dioxide | NO2 | 0... 100 ppm | 0.1 ppm |
Flammable gases | LEL (infrared) | 0... 100 % LEL | 1% |
* Standardized calibration to methane, butane, pentane, ethylene and more on demand. | |||
** Combined sensor | |||
Acoustic alarm signal of gas detector | 95 dB (A) Frequent control signal, disengageable |
||
Optic alarm | Extra bright LED's, red /blue flash, visible from every sight angle | ||
Vibration alarm | Additionally to optic and acoustic warning, device vibrates | ||
Display | Bright head mounted display, two-colored, switches in case of alarm from green to red | ||
Data storage | 50 hours at 10 sec. interval | ||
Power supply | Lithium ion battery Approx. 19 hours in diffusion mode pprox. 17 hrs. in pump mode |
||
Enclosure type of gas detector | IP 67/ 65 | ||
Dimensions | 5.1 x 3.2 x 1.7 in / 130 x 82 x 43 mm (H x B x D) | ||
Weight | < 1 lb / 380 g 5 gases with pump | ||
Surrounding conditions | -20°F... 122°F / -20 ... + 50 °C 20 ... 90 % rH non condensing |
||
Standards / codes | EN 60079-29, EN 45544, EN 50104 EN 50270, EN 50271 EN 61779 |
||
Certification of gas detector | ATEX - II 2G Ex ia d IIC T4 Gb IECEx - Ex ia d IIC T4 UL: Class 1, Div 1, Groups A, B, C, D cUL: Class 1, Div 1, Groups A, B, C, D |
||
PC interface | USB interface device specific | ||
Attention: According to ATEX and BG guidelines (T021 and T023), all mobile gas detector devices have to undergo a sight check and display control before use or at least once a day. Our technicians and engineers will gladly advise you regarding the necessary test gases and discharge units. Please call PCE Instruments technical support for assistance. | |||
Maintenance and recalibration: The gas detector can be sent to us for purposes of maintenance and calibration (e.g. biannually). The gas detector will then be demounted, cleaned and recalibrated. If a sensor of the gas detector should not be calibrateable any more or its life time expired we will first inform you. Reserve sensors are also available. |
|||
This gas detector is ATEX approved. What does it mean?: The ATEX production directives (commonly known as "ATEX 95" because of art. 95 of the EU directives) by theEuropean Parliament for gas detectors and protection systems for appropriate operation in areas with explosive risks determines the terms for application of a product that is used in those areas. The directives covers in attachment II the basic health- and security requirements that have to be followed by the producer and then to be confirmed by an accordant procedure to evaluate the conformity. Our gas detector achieves all current standards by the EU. |