รหัสสินค้า | SKU-08593 |
หมวดหมู่ | เครื่องทดสอบความแข็งแบบไมโคร(Micro rubber Hardness tester),Asker |
ราคาปกติ | |
ลดเหลือ | 0.00 บาท |
สถานะสินค้า | Pre-Order |
ลงสินค้า | 11 ส.ค. 2564 |
อัพเดทล่าสุด | 4 ส.ค. 2567 |
คงเหลือ | 1 ชิ้น |
จำนวน | ชิ้น |
![]() |
Hardness tester for thin and small samples.Realizes hardness measurement of the part itself.
Since the time required for measurement is extremely short compared to the IRHD micro method, it can dramatically reduce the time required when large-volume measurements are required, such as "measuring the micro hardness distribution of a product cross section" used in assessing the deterioration of rubber parts.
In addition, by using the measurement application software, it is possible to analyze the creep characteristics of a sample by monitoring the hardness in real time every 0.1 seconds for up to 60 seconds from the start of the measurement. It has been adopted by many domestic automobile parts manufacturers and office equipment manufacturers for new product development and quality control, and has a proven track record in a variety of fields.
model | MD-1 capa |
Measuring principle | Cantilever leaf spring |
Load | 0 degrees: 22mN (2.24gf)
100 degrees: 332mN (33.85gf) |
Indenter shape | Type A: Cylindrical (diameter 0.16mm, height 0.5mm) / outer diameter: 4mm inner diameter: 1.5mm
Type C: Hemispherical (diameter 1.0mm, height 0.5mm) / outer diameter: 9mm inner diameter: 2mm |
working desk | 80mm in diameter |
Reading range | 0 ~ 100º (minimum reading 0.1º) |
Descent speed control | Servo motor |
Vertical height range | 0 ~ 67 mm |
Test mode | Peak hold mode, time hold mode, normal mode |
External output | RS-232C, Ethernet |
Built-in list machine | Data printing (external computer statistical analysis data) |
power supply | AC100 – 240V |
Outside size | Approximately 500 x 190 x 280 mm |