Asker รุ่น MD-1Capa เครื่องทดสอบความแข็งแบบไมโครอัตโนมัติ,Polymer meter micro rubber hardness meter

Asker รุ่น MD-1Capa เครื่องทดสอบความแข็งแบบไมโครอัตโนมัติ,Polymer meter micro rubber hardness meter
รหัสสินค้า SKU-08593
หมวดหมู่ เครื่องทดสอบความแข็งแบบไมโคร(Micro rubber Hardness tester),Asker
ราคาปกติ 850,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 11 ส.ค. 2564
อัพเดทล่าสุด 4 ส.ค. 2567
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
Measure the hardness of a rubber sheet around 1 mm in a short time
[MD-1 capa] is a micro rubber hardness tester that can measure minute rubber parts such as automobile parts, electronic circuit parts, and OA equipment parts in a short time with the product shape regardless of the test piece. Ideal for measuring hardness for thin and small samples such as various rubber materials, thermoflammable elastomers, and soft plastics. Can be connected to a personal computer via Ethernet or RS-232C interface.
 

Hardness tester for thin and small samples.Realizes hardness measurement of the part itself.

Since the time required for measurement is extremely short compared to the IRHD micro method, it can dramatically reduce the time required when large-volume measurements are required, such as "measuring the micro hardness distribution of a product cross section" used in assessing the deterioration of rubber parts.

In addition, by using the measurement application software, it is possible to analyze the creep characteristics of a sample by monitoring the hardness in real time every 0.1 seconds for up to 60 seconds from the start of the measurement. It has been adopted by many domestic automobile parts manufacturers and office equipment manufacturers for new product development and quality control, and has a proven track record in a variety of fields.

  • A single measurement can be completed in a short time (approximately 3 seconds).
  • There are three measurement modes: Peak Hold, Timer Hold, and Normal. Timer Hold can be set at 1 second intervals up to a maximum of 15 seconds.
  • It can be connected to a computer via Ethernet or RS-232C interface.
  • Measurement application software is included as standard. Measurement results can be pasted into Excel with a single action.
  • Two models are available: Type A for general rubber and Type C for soft rubber.
model MD-1 capa
Measuring principle Cantilever leaf spring
Load 0 degrees: 22mN (2.24gf)

100 degrees: 332mN (33.85gf)

Indenter shape Type A: Cylindrical (diameter 0.16mm, height 0.5mm) / outer diameter: 4mm inner diameter: 1.5mm

Type C: Hemispherical (diameter 1.0mm, height 0.5mm) / outer diameter: 9mm inner diameter: 2mm

working desk 80mm in diameter
Reading range 0 ~ 100º (minimum reading 0.1º)
Descent speed control Servo motor
Vertical height range 0 ~ 67 mm
Test mode Peak hold mode, time hold mode, normal mode
External output RS-232C, Ethernet
Built-in list machine Data printing (external computer statistical analysis data)
power supply AC100 – 240V
Outside size Approximately 500 x 190 x 280 mm

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10259]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [92]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [240]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม