Teitsu รุ่นUDM-1100เครื่องวัดความหนาแบบอุลตร้าโซนิค,Ultrasonic Thickness Gauge,Meas.range:1.0～50.0mm(for FRP,rubber,plastic)

UDM-1100 reads signals only from the bottoms and displays the measured values on LCD by using special ultrasound circuits and sensors.

Easy to carry because it weighs only 350g including a probe.
Even when there are noise echoes reflected from laminated parts such as FRP, special probes and signal processing ensure reliable measurement from the front side to the backside.

• FRP hulls, aircraft, auto parts, storage tanks, septic tanks, chimneys, pipes, etc.
• For rubber products such as conveyor belts and tires
• For flaw detection and quality control

• For ship inspection
  • The cause was water intrusion into the ship due to cracks in the bottom of the ship (damage to FRP).
• For thickness measurement
  • Measures the thickness of FRP hulls, aircraft, automobile parts, storage tanks, septic tanks, chimneys, pipes, conveyor belts, rubber products such as tires, and other synthetic resin products.
• For flaw detection and quality control
  • If internal peeling or cracking occurs, only the thickness of the upper layer of the measurement surface is displayed. It is possible to manage and identify product materials by measuring the speed of sound.

• One-touch measurement. You can measure the thickness from one side
• No specialized knowledge or skill is required.
• Built-in μcpu for even higher performance and stable display
•  With a large LCD and EL backlight, the display is easy to see even in dark places.
• Body only 290g pocket size and small weighing