We recommend a vibration meter that can handle a wide range of applications, from simple equipment diagnosis to precision equipment diagnosis.The model number of the vibration meter Vibro 3100 has changed due to a software change.This is a precision diagnostic vibration monitor that you cannot do without for investigating the source of vibration.It is possible to estimate the cause of vibration by determining the frequency position of the cause of vibration generated by the machine, such as unbalance or bearing failure. Unbalance, misalignment, mechanical looseness and backlash, fans, blowers, pumps, gears (increase/deceleration gears), rolling bearings, electric motors.
Data recorded by the measuring instrument can be saved on a PC and output to Excel or Word.
- Download 100 data recorded in the main unit
- Download each data point by point
- FFT graph of final data for each point, record/observe current data
- Observe a graph of measurements in points
- Register in the database for each point
- Registration of measurement data in the database and output/printing to Excel and Word
- Two display modes: digital value mode and spectrum mode
- Large memory function: 100 X 100 measured results (100 testing points, 100 data can be stored in each testing points), 100 data can be stored in each testing points), 100 spectrograms (each testing point can store one spectrogram)
- Spectrogram can display in real time
- Histogram can be made according to the preset alarm line
- Upper / lower limits pre-setting and sound alarm if test results out of limitation, which leads to spectrum analysisi mode automatically
- Connected to PC with advanced software for more analysis needs
- Integrated with printer to print ouot the testing result
- 320 X 200 Matrix LCD display with backlight
- TIME®7231 equipped with low sensitivity probes, suitable for testing strong vibration
- TIME®7232 equipped with high sensitivity probes, suitable for testing weak vibration
- Conform to ISO 2954, GB/T13824, GB138233 standards
Display display |
57 mm x 37 mm LCD display (320 x 240 pixels) |
Backlight |
Yes |
Measurement |
Velocity, acceleration, displacement |
Measurement contents |
Measurement range |
Frequency range selection |
Acceleration (peak) |
1.0 to 392.0 m / s² |
10-200Hz, 10-500Hz, 10-1KHz, 10-10KHz |
Speed (rms) |
0.10 – 80.00 cm / s |
10-200Hz, 10-500Hz, 10-1KHz |
Displacement (between peaks) |
0.01 – 18.10 mm |
10-200Hz, 10-500Hz |
accuracy |
± 5% |
memory |
100 x 100 measurements and 100 spectral graphs |
Power off |
Can be set |
Data output |
RS-232C serial output |
Operating temperature and humidity |
0 ° C-40 ° C / Relative humidity less than 80% RH (no condensation) |
Power supply |
Lithium rechargeable battery (12 hours charging with AC adapter can be used for 20 hours) |
Dimensions / weight |
Body: 171 x 78.5 x 28 mm, approx. 232 g Vibration sensor: 54 g |
Standard accessories |
- Main unit
- vibration sensor,
- instruction manual,
- magnetic base,
- carrying case,
- two screws,
- leather case for main unit,
- AC adapter,
- software CD-ROM,
- RS232 communication cable,
- USB key
|
