Ono Sokki รุ่นSE-2500A เครื่องวัดความเร็วรอบเครื่องยนต์แบบพกพา-แบบไม่สัมผัสNon-contact Handy Engine Tachometer SE-2500A

Ono Sokki รุ่นSE-2500A เครื่องวัดความเร็วรอบเครื่องยนต์แบบพกพา-แบบไม่สัมผัสNon-contact Handy Engine Tachometer SE-2500A
รหัสสินค้า SKU-07545
หมวดหมู่ เครื่องทดสอบและอุปกรณ์ตรวจสอบ(Test and Inspection Equipment)
ราคาปกติ 25,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 11 มิ.ย. 2564
อัพเดทล่าสุด 11 มิ.ย. 2564
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
A non-contact handheld engine tachometer designed exclusively for gasoline engines.
The
engine speed can be measured in 1 r / min or 0.01 r / s units by simply bringing the head (detector) of the main unit close to the ignition coil .
■ Built-in sensor type
■ Analog output / pulse output / monitor output equipment
■ 20 data memories
Ono Sokki SE-2500A Non-contact Handy Engine Tachometer Specifications

Adaptive engine gasoline engine
Calculation method Periodic calculation method
Measurement time 1s + input signal within 1 cycle time
Unit of measurement r / min, r / s
Measurement range

2 cycle

4 cycles

Rotational speed

---

1 cylinder

120-20,000 r / min

1 cylinder

2-cylinder

120-20,000 r / min

---

3 cylinder

120-20,000 r / min

2-cylinder

4-cylinder

120-20,000 r / min

---

5 cylinders

120-20,000 r / min

3 cylinder

6 cylinder

120-15,000 r / min

4-cylinder

8 cylinder

120-12,000 r / min

--- 10 cylinder

120-10,000 r / min

--- 12 cylinder 120-8,000 r / min

* In the case of r / s, the range of the above r / min value divided by 60

Measurement accuracy Display value * × (± 0.02%) ± 1 count (* Display value is the count value excluding the decimal point)
Detection method Electromagnetic induction method
Detection distance 10-200 mm
Target to be detected ignition coil
Selection of the number of cylinders and the number of cycles With built-in signal selector
Display 5 digits, liquid crystal display, 7 segments, with backlight (character height: 10.2 mm)
Overrange function Overrange ( ERROR  mark) display when the measured value exceeds the display range
Rotation upper limit warning function When the rotation speed exceeds the preset upper limit value, the upper limit warning (  mark) is displayed.
Analog output Output for rotation speed display value

Output voltage: 0 to 1 V / 0 to full scale (full scale is optional)
Conversion method: 10 bit D / A conversion method
Linearity: ± 1% / full scale
Output update time: 50 ms + 1 cycle time or less
Temperature stability: ± 0.05% / full scale / ℃ (span & zero)
Setting error: ± 0.5% / full scale
load resistance: 100 kΩ or more

Monitor output Analog output for monitoring after waveform shaping of sensor signal
(using switching with the above rotation speed analog output)
Load resistance: 100 kΩ or more
Pulse output 1 pulse output for each signal detection

Output voltage: Hi +4.5 V or more, Lo +0.5 V or less
Output logic: Positive logic
Load resistance: 100 kΩ or more

Operating temperature limit 0 to + 40 ° C
Storage temperature range -10 to +50 ° C
Power supply AAA batteries (1.5V) x 4 or dedicated AC adapter PB-7090 (optional)
Battery life 32 hours or more (when the backlight is off), 8 hours (when the backlight is on)
Battery warning display A warning mark (LOW mark) is displayed when the battery voltage drops below approximately 4.4 V.
External dimensions 198.5 (L) x 47.5 (H) x 66 (W) mm
Quality Approximately 300 g (including batteries)
accessories I AAA batteries x 4, carrying case

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10259]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [92]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [240]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม