CO2 รุ่นHJ-TRCO2 เครื่องวัดความเข้มข้นของCO2 Transmitter HJ-TRCO2

CO2 รุ่นHJ-TRCO2 เครื่องวัดความเข้มข้นของCO2 Transmitter HJ-TRCO2
รหัสสินค้า SKU-07108
หมวดหมู่ เครื่องวัดและตรวจจับก๊าซ(Gas measurement l Gas detector)
ราคาปกติ 15,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 6 มิ.ย. 2564
อัพเดทล่าสุด 6 มิ.ย. 2564
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
The CO2 concentration is displayed in real time on the liquid crystal display. The
CO2 transmitter HJ-TRCO2 is a device that detects the ambient CO2 carbon dioxide concentration and converts it to analog output.
It is a wall-mounted type and displays the CO2 concentration on the front liquid crystal part.
It
is possible to control CO2, temperature, and humidity that detect and display CO2 concentration, temperature, and humidity on the display .
・ A general-purpose transmitter that detects and displays CO2 concentration, temperature, and humidity on the display.
・ CO2, temperature, and humidity can be controlled.
・ CO2 concentration can be measured with high accuracy up to 5000ppm. Temperature: -20 ° C to 60 ° C Humidity: 0 to 100% RH
-Maintenance-free, low
- cost analog output using the latest NDIR (infrared) method : 0 to 10VDC or 4 to 20mA (voltage output or current output) Can be selected with a jumper pin)
Specifications of Satotech CO2 transmitter HJ-TRCO2


Oxygen dioxide sensor NDIR sensor
Measurement range 0-5000 ppm
Accuracy (22 ° C) ± (60 ppm + 3% rdg)
response speed Less than 5 minutes with 90% response (when the gas is agitated at low speed)
Duct wind speed 0-450 m / min
Pressure dependence 0.135% of reading (every mm / Hg)
Temperature dependence 0.2% FS (℃)
Ready-to-use time 10 minutes (but 24 hours for the first time)
temperature humidity ---

temperature

Humidity

sensor BAND-GAP sensor Capacitive humidity sensor
Display range -20 ℃ ~ 60 ℃ 0-100% RH
accuracy ± 0.5 ° C
(25 ° C)
± 3% RH
(25 ℃ ・ 40-60% RH)
resolution 0.1 ℃ 0.1% RH
Sensor drift ± 0.1 ° C (year) 0.1% RH (year)
IP standard IP54
Power supply 24VAC (50 / 60Hz ± 10%), 24VDC
power consumption Average 0.8 W, maximum 1.8 W
Analog output 0 to 10 VDC (initial value), 4 to 20 mA
(voltage output or current output can be selected with jumper pins)
Operating environment temperature -20 ℃ ~ 60 ℃
Operating environment humidity 0-95% RH
Storage environment temperature 0-70 ℃
weight About 240 g
size Height 169 mm x width 123.5 mm x thickness 50 mm
Standard accessories instruction manual

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10259]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [92]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [240]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม