Aco รุ่น 6238 เครื่องวัดความดังเสียง,Precision Sound Level Meter,Class-1,#Fre.range:5~20kHz,Type6238,(ACO 6230H แทน)

Aco รุ่น 6238 เครื่องวัดความดังเสียง,Precision Sound Level Meter,Class-1,#Fre.range:5~20kHz,Type6238,(ACO 6230H แทน)
รหัสสินค้า SKU-06888
หมวดหมู่ เครื่องมือวัดด้านสิ่งแวดล้อม(Environmental Measuring Instrument)
ราคาปกติ 135,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 31 พ.ค. 2564
อัพเดทล่าสุด 12 ก.ค. 2568
คงเหลือ 0 ชิ้น
เลิกจำหน่าย
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
Normal sound level meter / precision sound level meter.
Accurate measurement is possible in real time.
Accurate measurement of low level sound.
Specifications as precision sound level meter 6238


Product name
Measurement method Precision sound level meter
Conformity standard JIS C1509-1: 2005 Class 1
IEC 61672-1: 2002 ClassI
Frequency range 20Hz to 12.5kHz (Measurement Act)
1Hz to 20kHz (Z characteristic)
20Hz to 20kHz (A characteristic)
Microphone model
(sensitivity)
TYPE 7146NL (-28dB, single unit -26dB)
Level range 10dB Step 6 step switch
20 ~ 80 dB, 20 ~ 90 dB
30 ~ 100 dB, 40 ~ 110dB
50 ~ 120 dB, 60 ~ 130 dB
Measurement level A characteristic: 28 to 130 dB
Z characteristic: 39 to 130 dB
Overload characteristics Displayed at + 3 dB from the upper limit of the excess full scale
Self-noise level The lower limit of the measurement level (range) is 8 dB or more from the self-noise level.
Linearity range 75dB
Time weight characteristic Fast, Slow
Frequency weighting characteristics A characteristic, Z characteristic
Measurement function Sound pressure level (Lp)
Noise level (LA)
Equivalent noise level (LAeq)
Single noise exposure level (LAE)
Maximum noise level (LAmax)
Minimum noise level (LAmin)
Time rate Sound level (L05, L10, L50) , L90, L95 5 values, LAN)
Peak sound pressure level (Lpeak)
Power average value of maximum noise level in the section (LAtm5)
Measurement time 1s, 3s, 5s, 10s, 1min, 5min, 10min,
15min, 30min, 1h, 8h, 12h, 24h
Manual (maximum measurement time; 199 hours 59 minutes 59 seconds)
Sampling cycle 20.8 μs (Leq, Lmax, Lmin), 64 ms (LN)
Last minute data removal function Data removal function for the previous 3s or 5s by the pause button
Recording start: Automatic or manual selection possible
Timer function Measurement can be started / stopped at any time
display LCD with LED backlight (128x64 dots)
Numerical display: 4-digit
display cycle: 1s
bar display: Display cycle: 0.1s
Warning: Over: Displayed at + 3dB from the upper limit of the overload scale
Under: -0.6dB from the lower limit of the underload scale Display
Battery voltage: 5 levels of remaining capacity Display
clock: Year, month, day, hour, minute, second
Proofreading Electrical calibration with built-in oscillator (1kHz) sine wave
Output terminal AC output terminal: Φ2.5 jack
output voltage : 1Vrms (FS)
output resistance: 600Ω
load resistance: 10kΩ or more
DC output terminal: Φ2.5 jack
output voltage: 2.5V (FS), 0.25V / 10dB
output resistance: 50Ω
load Resistance: 10 kΩ or more
Efficacy detection circuit True effective value detection circuit (digital calculation method)
Calculation Digital method
Pause function In addition to normal pause, last minute data removal
Data recording Instantaneous value or calculated value is
stored in the built-in memory or memory card (SD card)
Manual recording: Noise level, calculated value, recording time, sampling interval is recorded in the built-in memory or memory card (SD card)
Auto recording: 100 msec, 200 msec or The noise level for each 1 sec or the calculated value for each measurement time is continuously recorded on the memory card (SD card), and there is a timer function. When the
arithmetic card is installed: The arithmetic processing result is recorded.
I / O terminal Sound level meter control
data output by personal computer and direct output to a dedicated printer
Digital output of raw noise waveform by USB interface
Comparator output Comparator function by setting level
Power supply 4 AA alkaline batteries or AC adapter
Battery life (continuous time): Alkaline battery LR6 Approximately 9 hours
Battery life when the backlight is on is approximately 1/3
Current consumption: 150mA (at 6V input) When the calculation function is OFF
Operating temperature limit -10 ℃ ~ 50 ℃ 30% ~ 90% RH (No condensation)
Size 85 (W) x 328 (H) x 48 (D)
weight Approximately 450g (including batteries)

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10217]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [93]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [241]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม