Cedar รุ่น DID-4 ไขควงวัดแรงบิด,Digital torque screwdriver,meas.range:0.020～4Nm.

Model Formula

DID-4

Measuring    range

0.020～4 N･m      0.20～40 kgf・cm      0.20～35 lbf・in

Accuracy

±0.5％ (499 or less digit±3digit)

Display

The 4 figures digital display of LCD

The measurement direction

CW-CCW (right and left)

 
Measurement Mode

PP

peak to peak     The highest value of load is hold-displayed.

TR

track    A display also changes with load change.

PD

peak-down     Load catches and displays the moment included in
descent from a rise.

C

Real-time Output   Load torque value is outputted every about1/ 160
second.

A success or failure
judging function

High and low value are measurement within the limits, and can be set up.
Five-set preservation is possible.

The Maximum, minimum, and the average value

The data number, the maximum, the minimum value, and the average value of memory data are displayed.

Data memory counts

800 data

Data output

ASCII format (baud rate 19200)

auto clear time

If the set-up time comes, measurement value will be automatically cleared in 0.0~3.0 seconds (0.5s interval).

Setup of count

1 to 99 count (count in a clockwise direction)

Power supply

Ni-MH chargeable battery 1.2V×4cells 800mAh

Charge time / use time

Charge about 3 hour /, continuation about 12-hour use

Auto-power-off

After the neglect during 10 minutes

Bit / Socket part

HEX 6.35

Weight

400g

Accessories (one piece each)

Bit #1+, #2+

Bit holder     One way bit holder

Exclusive charger

Result of the calibration document Certification on calibration document / Traceability system figure

Option

When outputting data, the cable(USB miniB) is needed.

 
 
 
 
Outside-dimension (mm)