chn spec CS-810 Transmittance Spectrophotometer

chn spec CS-810 Transmittance Spectrophotometer
chn spec CS-810 Transmittance Spectrophotometerchn spec CS-810 Transmittance Spectrophotometerchn spec CS-810 Transmittance Spectrophotometerchn spec CS-810 Transmittance Spectrophotometerchn spec CS-810 Transmittance Spectrophotometer
รหัสสินค้า SKU-02621
หมวดหมู่ •เครื่องสเปกโตรมิเตอร์แบบพกพา(Portable Spectrophotometer)
ราคาปกติ 211,600.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 24 ก.ค. 2562
อัพเดทล่าสุด 25 ก.ค. 2562
คงเหลือ ไม่จำกัด
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
Transmittance spectrophotometer CS-810 adopts the geometry of D/0, integration of the full band LED composite light source, double beam optical system, ETC every-test calibration technology, which makes the instrument reaches a resolution of 0.0001, deviation of the transmittance within 0.08% and chromatic value △E*ab 0.015.
Brief Introduction
1. D\0 Geometry
liquid color control
2. It is suitable for testing the clear, transparent and translucent products such as glass,oil,plastic,petrol,gasoline and other materials' color.
liquid color control
3. Adopt UV enhanced silicon photo diode Extend the transmittance from 0~100% to 0~200%
liquid color control
4. It can also be used for measure APHA/Hazen/Pt-Co, Gardner, ASTM color, Yellowness Index for liquid.
liquid color control
5.Color QC Software
Our spectrophotometer comes with PC color QC software, which is applicable in various industries for management of color data. It is used for store test result,generate test report and print test report after connect with printer.
liquid color control
6.Longest Warranty Time
liquid color control
a. One Year Guarantee Time.
b. If testing data is not correct, we can do refund.
c. We will provide testing report for every device to assure the authority of the data and it will save the calibration cost for 1 year.

Type

CS-810

 

Illumination

d/0(Diffused illumination, 0°viewing)
SCS optical engine(light splitting and integration system),( conform to CIE No.15, ISO 7724/1, ASTM E1164,DIN 5033 Teil7, JIS Z8722 Condition c standards)

 

Size of integrating sphere

Φ40mm,Alvan diffused reflection surface coating

 

Illumination Light source

CLEDs(entire wavelength balanced LED light source)

 

Sensor

dual light path sensor array

 

Wavelength range

400-700nm

 

Wavelength interval

10nm

 

Half spectral width

5nm

 

Reflectivity range

0-200%

 

Reflectivity resolution

0.01%

 

Observation angle

2°/10°

 

Measurement light source

A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12

CWF,U30,DLF,NBF,TL83,TL84

 

Data being displayed

Transmittance graph/value, chromatic value, color difference values, color assessment results, color tendency, history color value simulation, manual input standard sample, generate measurement reports

 

Measurement time interval

2 seconds

 

Measurement time

0.5 seconds

 

Color space

CIE-L*a*b,L*C*h,CIE-L*u*v, XYZ, Yxy, Transmittance, Hunterlab, Munsell MI, CMYK

 
 

Color difference formulas

ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00

ΔEab(Hunter),555color classification

 
 

Other colorimetric indices

WI(ASTM E313-10,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube Berger, Ganz, Stensby),

YI(ASTM D1925ASTM E313-00,ASTM E313-73),

Tint(ASTM E313-00,CIE,Ganz),Metamerism index Milm, Stick color fastness, Color fastness, APHA, Pt-Co, Gardner, Saybolt, Astm color

 
 

Repeatability

light splitting reflectivity: standard deviation within 0.08%

 

color values:ΔE*ab<=0.015(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals,Maximum0.03)

 

Interface

USB

 

Data storage

mass storage

 

Light source longevity

5 years, 1.5 million tests

 

Size

475*340*150mm(L*W*H)

 

Weight

about 7kg

 

Work temperature range

0~45, relative humidity 80% or below at 35°C ),no condensation

 

Storage temperature range

25 to 55relative humidity 80% or belowat 35°C ), no condensation

 

Standard accessories

AC power line, color management software, drive software, USB cable, black calibration tube, 40*10mm cuvette

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10259]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [92]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [240]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม