รหัสสินค้า | SKU-22998 |
หมวดหมู่ | เครื่องควบคุมและแสดงผลแบบดิจิตอล(Controllers),Chino |
ราคาปกติ | |
ลดเหลือ | 0.00 บาท |
สถานะสินค้า | Pre-Order |
ลงสินค้า | 18 ม.ค. 2568 |
อัพเดทล่าสุด | 18 ม.ค. 2568 |
คงเหลือ | 1 ชิ้น |
จำนวน | ชิ้น |
![]() |
DB Series Digital Indicating Controller
Control Mode (Output 1) |
Standard Type |
High Function Type |
ON-OFF pulse type |
DB1010B000-G0A |
DB20100000-G0A |
ON-OFF servo type (Standard load specification) |
DB1020B000-G0A |
DB20200000-G0A |
Current output type |
DB1030B000-G0A |
DB20300000-G0A |
SSR drive pulse type |
DB1050B000-G0A |
DB20500000-G0A |
Voltage output type |
DB1060B000-G0A |
DB20600000-G0A |
ON-OFF servo type (Very light load specification) |
DB1080B000-G0A |
DB20800000-G0A |
In DB series, there are two types of controllers: new DB1000 which takes over functions of old DB1000 and function upgraded DB2000. Accuracy rating 0.1%, sampling rate 0.1sec., and size of 96×96m, DB series covers general functions required to the temperature controllers, all-in-one type controllers.
Input Signal |
Thermocouple: B, R, S, K, E, J, T etc. |
|
Accuracy Rating |
±0.1% ±1 digit of input span |
|
Reference Junction Compensation Accuracy |
K, E, J, T, N, Platinel II...Equivalent of ±0.5°C or ±20μV, whichever greater. |
|
Sampling Rate |
Approx. 0.1sec. |
|
Burnout |
Higher limit burnout is equipped as standard only for thermocouples, direct voltage (±50mV or lower) and resistance thermometer (3-wire). |
|
Display Element |
Upper display LED |
|
Rated Power Supply Voltage |
General specification 100 to 240V AC |
|
Weight |
Without option Approx. 450g With option Approx. 580g |
|
Output Type |
Current output type, ON-OFF pulse type, voltage output type, SSR drive pulse type, ON-OFF servo type |
|
Control Set Value |
PID 8 types |
|
Anti Reset Windup |
Higher limit・・・0.0 to 100.0% |
|
ON-OFF Pulse Type |
Output signal: |
ON-OFF pulse continuous signal |
Contact capacity: |
Resistance load 100 to 240VAC 30VDC, 5A or lower |
|
ON-OFF Servo Type |
Output signal: |
ON-OFF servo continuous signal |
Contact capacity: |
Resistance load 100 to 240VAC 30VDC, 5A or lower |
|
Current Output Type |
Output signal:4 to 20mA DC |
|
SSR Drive Pulse Type |
Output signal: |
ON-OFF pulse voltage signal |
Output voltage: |
ON voltage 12VDC ±20% |
|
Voltage Output Type |
Output signal:0 to 10V |
|
Alarm Point |
4 points |