Defelsko รุ่นPosiTector-DPMIR1เครื่องวัดอุณหภูมิจุดน้ำค้าง, Dew Point Meter Standard, Integral Probe with Infrared Surface Temperature Sensor,Dew point:–60°～80°C

Measures and records climatic conditions including: Relative humidity, air temperature, surface temperature, dew point temperature, wind speed and difference between surface and dew point temperatures. Ideal for surface preparation as required by ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32.

Instruments for measuring dew points in the environment. determines and records the following climatic variables: wind speed, relative humidity, air temperature, surface temperature, dew point temperature, and difference between surface and dew point temperatures. NEW 2.8" colour touchscreen that is larger, more impact-resistant, and has a new keypad for fast menu navigation. NEW Enclosure with an IP65 rating that is resistant to weather, dust, and water. Accurate, consistent readings are provided by quick response precision sensors. In the Auto Log mode, environmental parameters are recorded at user-specified time intervals.

• Hand-held electronic gage used to measure, calculate and record climatic conditions into a USB flash memory
• Features fast-response precision sensors to provide accurate repeatable readings and an auto-log mode for recording environmental parameters at user-selected time intervals
• Comes equipped with a shock-absorbing protective rubber holster and a belt clip
• Conforms to national and international standards including ISO and ASTM
• A large, easy-to-read graphic LCD dis­play with mul­ti­lin­gual sup­port along with a two-but­ton menu-driven user inter­face make this gage easy to oper­ate.
• Rugged indoor/out­door instru­ment is sol­vent, acid, oil, water and dust resis­tant – take it any­where
• Graph Mode charts all five param­e­ters for quick anal­y­sis
• Slid­ing cover on the sen­sor pro­tects it when not in use and the white hous­ing reduces the effect of direct sun­light for greater pre­ci­sion
• Sen­sor also has a soft rub­ber grip for easy han­dling and can be removed to accu­rately spot check hard-to-reach areas
• Quick recov­ery fea­ture – built-in heat­ing ele­ment removes con­den­sa­tion from probe ... always a fac­tor when any instru­ment is moved from a cold to a warm envi­ron­ment
• Audio and visual alarm indi­cates when cli­matic con­di­tions are unsuit­able for paint­ing
• Back­glow dis­play for dim or dark envi­ron­ments
• Inter­nal mem­ory stores up to 2500 datasets
• Data log­ger mode auto­mat­i­cally records datasets at user selected time inter­vals – ideal for unat­tended oper­a­tion to record cli­matic trend

* DPM IR models only
** At 23° C (73° F) ambient
†  DPM A models only
‡ dependent on RH. See Dew Point (Td) Accuracy for more information.

• PosiTector Standard Gage Body BDYSTD-G
• PosiTector DPM1Probe PRBDPM
• Temperature Sensors
• Protective rubber holster with belt clip Wrist strap and protective lens shield
• 3 AAA alkaline batteries
• PosiSoft Software and USB cable
• Long Form Certificate of Calibration traceable to NIST
• Nylon carrying case with shoulder strap and instructions
• Two (2) year warranty