NipponFlowCell รหัสสินค้า NFLT-R-CB00 โฟลว์มิเตอร์วัดความดันแตกต่าง , Differential pressure flowmeter ,flowrate : 10~50L/min,connection diameter 20A

NipponFlowCell รหัสสินค้า NFLT-R-CB00 โฟลว์มิเตอร์วัดความดันแตกต่าง , Differential pressure flowmeter ,flowrate : 10~50L/min,connection diameter 20A
รหัสสินค้า SKU-21582
หมวดหมู่ โฟลว์มิเตอร์วัดความดันแตกต่าง(NFLT,NFLY Series)/Nippon Flow Cell
ราคาปกติ 34,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 6 พ.ค. 2567
อัพเดทล่าสุด 6 พ.ค. 2567
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay

A flow cell flowmeter is a flowmeter that combines a base socket with a built-in orifice plate and a special area flowmeter as a flow rate indicator. It is extremely compact due to its unique design and can be used for liquids and gases. As standard products, flow scales are available for each nominal diameter for water and AIR, so you can select the most suitable scale according to the flow rate you will be using.
  • The low differential pressure design takes into consideration the environment and energy saving, reducing pressure loss compared to our conventional products. (Depending on the specifications, pressure loss may be higher than our conventional products.)
  • Achieved short delivery times by standardizing fluids and flow rates.
  • Wetted parts are made of stainless steel for high corrosion resistance and durability.
  • Can be used in free flow direction (vertical/horizontal).
  • Using the connector, the cell block (flow rate indicator) can be moved to a position where it can be easily seen.

Measurement fluid

Liquid (equivalent to water), gas (AIR/N2, blower air)

Accuracy

For liquids ±2%FS
For gases ±2.5%FS (±3%FS if the float is carbon)

Aperture

NFLT-R type (screw connection) 10A to 100A
NFLY-R type (wafer connection) 40A to 500A

Maximum working pressure

0.8MPa

Maximum operating temperature

90℃

Material

SCS14, SUS304, SUS316, Pyrex glass, etc.

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10259]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [92]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [240]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม