New Cosmos รหัส PE-2DC-C1 เครื่องตรวจจับก๊าซ,Suction Type Gas Detector,Gas to be detected Flammable gas,pump power:DC24V±10%

To ensure reliable operation, please read this instruction manual prior to use.The difference between PE-2CC and PE-2DC is the power source for the pump. The PE-2CC requires 100 VAC, while the PE-2DC requires 24 VDC for the pump’s power source.

This gas detector can detect one of a variety of gases including combustible gases by installing one of the three sensor types, catalytic combustion sensor, hot wire semiconductor sensor, and thermal conductivity sensor.

Prior to use, please read the indicator unit’s instruction manual. This unit is paired with an indicator unit (e.g., V2, V3), and these pairs can be used in conjunction with one alarm unit (e.g., VAL, VAS) to form a gas alarm system (e.g., UV-810). Install the gas detector at a location where detection of the target gas is necessary, and install the indicator unit at a location that is convenient for monitoring gas concentrations. The indicator unit displays the gas concentration detected by the corresponding gas detector on its bar graph display. In a paired setup, the indicator unit produces a visual alarm when the gas detector detects a concentration of the target gas that is higher than the preset limit. In a gas alarm system setup, the alarm unit produces audio-visual alarms, if the gas detector detects a leak of the target gas that is higher than the preset limit.