Tohnichi รุ่นDB-200N-Sประแจปอนด์แบบหน้าปัดเข็ม,Dial Indicating Torque Wrench,Capacity:20～200,2N.m,1/2"Square Drive,DB200N-S

The Tohnichi DB 200N-S torque wrench is an indicator type wrench with an arrow display of the current tightening torque. Operating range 20.0 N•m - 200.0 N•m. By rotating the dial, you can set the required tightening torque and tighten to the “0” position on the dial. The duplicate arrow retains the last tightening torque. The key pressure gauge is protected from damage by a rubber rim. Rubber key handle. Light weight and easy to use. The relative measurement error does not exceed ±3%. Tightening is carried out in two directions.

• Wide range and high accuracy
• Dial indicating torque wrench.
• Ideal for torque quality inspections
• Easy to ready dial face has follower hand memory pointer that stays on peak torque for convenient reference
• Use for tightening purposes by simply rotating the dial to the desired torque. Completed tightening is achieved when the pointer indicates "0".
• DB is not length dependent. Therefore, accuracy is consistent regardless of where the hand is placed during operation.
• The dial indicator has a full-surround protective cover to prevent damage to external objects (except DB420N, DBE, and DBR series models).
• DB25N to DB280N models have a resin grip. Lowest torque range models have index finger handles designed to guide you to use light hand force to avoid possible over-torque.
• DBE has an extension handle.
• For DBR models, applies load by lever block or winch.
• Applicable for international use including the EU region. Compliant with calibration procedures of ISO 6789 Type I Class B.