Tekhne รุ่นTK-80เครื่องส่งสัญญาณจุดน้ำค้าง,Dew Point Transmitter,Meas.range:-80~20°Cdp

Tekhne รุ่นTK-80เครื่องส่งสัญญาณจุดน้ำค้าง,Dew Point Transmitter,Meas.range:-80~20°Cdp
รหัสสินค้า SKU-15569
หมวดหมู่ เครื่องวัดอุณหภูมิจุดน้ำค้าง(Dew point Meter)
ราคา 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 30 มิ.ย. 2566
อัพเดทล่าสุด 30 มิ.ย. 2566
คงเหลือ 0 ชิ้น
ขออภัย สินค้าหมด
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
  • A low cost model
TK-80 Dew Point Transmitter is a low cost model for TK-100 Dew Point Transmitter.
Narrow measurement range than TK-100 and weaker than TK-100 at operating pressure,
but it's a low cost model.
  • Easy
TEKHNE Corporation, a Japanese manufacturer, experienced dew point measurement
over 30years, is manufacturing innovative TK-80 series Hygrometer.

You can easily start measurement. TK-80 On-line Hygrometer offers you a complete set for continuous measurement,
including display monitor. What you need is 100 to 240VAC power supply and sample gas connection.
Also, you can select TK-80 Dew Point Transmitter, which can be used 'stand-alone' basis with 4-20mA signal output, powered by 12-28VDC.

  • High Quality
TEKHNE Ceramic Sensor is designed to secure the best mixture of accuracy, high response speed,
and long-term stability. Most advanced sensor technology is used for this purpose.
Also, the advanced microprocessor technology realised fully temperature compensation mechanism,
which minimises the effect by process temperature to the dew point measurement. The -80 to +20℃
dew point output is converted to stable and linear 4-20mA output in the TK-80 Transmitter.
  • Flexible
TEKHNE TK-80 series are for dew point measurement in air or inert gas.
Put the sensor into your process line through 5/8" UNF or 1/8" NPT by using Optional sampling block.
1/8 DIN display unit can be set up to 1,000m far away from the Transmitter.
The flow rate for the process line should be 1 to 5NL/min (with optional sampling block) or 0.5 to
10m/sec (without optional sampling block), at a temperature between -20 to +60℃ and in-line pressure up to 30MPa. Filters for removing dust are always recommended.
・Wide Measurement Range at -80 to +20°Cdp
・±2 °C Accuracy
・Quick Response
・Fully calibrated at TEKHNE factory, Japan
・Price Competitiveness
・Short Delivery Time
・Enhanced Technical Support
・Traceable to NIST
・National Standard
  • Measurement Range
    • -80 to +20°Cdp
  • Accuracy
    • ±2 °Cdp
  • Output
    • linear 4-20mA
  • Operating Temp
    • -20 to +60°C
  • Operating Pressure
    • 10Pa to 1MPa
  • Flow Rate
    • 1 to 10 NL/min(with Sampling Block) 0.5 to 10m/sec (without Sampling Block)
  • Power Supply
    • 12 to 28VDC

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10217]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [93]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [241]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม