Kikusui รุ่นPWR401MH-400Wแหล่งจ่ายไฟกระแสตรงขนาดกะทัดรัด,Compact wide-range DC power supply,Output:0~240V,0~5A

Kikusui รุ่นPWR401MH-400Wแหล่งจ่ายไฟกระแสตรงขนาดกะทัดรัด,Compact wide-range DC power supply,Output:0~240V,0~5A
Kikusui รุ่นPWR401MH-400Wแหล่งจ่ายไฟกระแสตรงขนาดกะทัดรัด,Compact wide-range DC power supply,Output:0~240V,0~5AKikusui รุ่นPWR401MH-400Wแหล่งจ่ายไฟกระแสตรงขนาดกะทัดรัด,Compact wide-range DC power supply,Output:0~240V,0~5AKikusui รุ่นPWR401MH-400Wแหล่งจ่ายไฟกระแสตรงขนาดกะทัดรัด,Compact wide-range DC power supply,Output:0~240V,0~5A
รหัสสินค้า SKU-15442
หมวดหมู่ เครื่องจ่ายไฟกระแสตรง(DC Power Supply)
ราคาปกติ 40,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
สภาพ สินค้าใหม่
ลงสินค้า 26 มิ.ย. 2566
อัพเดทล่าสุด 26 พ.ค. 2567
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay

PWR-01 series is a small, high-performance multi-functional small wide-range DC power supply. This product can automatically control the output through the sequence function. A computer is required to edit the program, and the sequence can be executed only by operating the panel after writing to the main unit (memory) of the power supply. And standard LAN (LXI), USB, RS232C communication interface required for system upgrade. In addition, as a desktop DC power supply, it is also equipped with front output terminals, internal resistance variable function, discharge ON/OFF function, CV/CC priority switching function, synchronous operation function, various protection functions, memory function, etc. Practical functions.

  • Sequence function (supports triggered synchronization)
  • Variable internal resistance function
  • LAN (LXI compliant) /USB/RS232C as standard interface
  • A virtual multi-channel bus (VMCB) function makes multi-channel operation more efficient
  • A wide range of voltage and current settings can be combined within its output power rating (3 to 4 times)
  • All models are equipped with front-facing output terminals as standard (maximum 10A)
  • Supporting universal input voltage (85V to 265V)
  • CONFIG setting shortcut function and display (Up to three parameters can be registered.)
  • Setting preset memory function (3 combinations of settings for voltage, current, OVP, OCP, and UVL)
  • The bleeder (sink) can be turned on/off, with an even stronger bleeder mode setting available
  • Output-on/off delay function
  • Soft start/stop function

AC INPUT

 

Model

PWR401MH

Nominal input rating

100 Vac to 240 Vac, 50 Hz to 60 Hz, single phase

Input voltage range

85 Vac to 265 Vac

Input frequency range

47 Hz to 63 Hz

Current (TYP)

 

100 Vac

5.6 A

200 Vac

2.8 A

Inrush current (MAX)

25 Apeak or less

Power (MAX)

560 VA

Power factor (TYP)

0.99 (input voltage: 100 V), 0.97 (input voltage: 200 V)

Efficiency (MIN)

75 % (TYP)

Hold-up time for power interruption (MIN)

20 ms or more

OUTPUT

 

Rating

 

Output voltage

240V

Output Current

5A

Output power

400W

Voltage

 

Maximum settable voltage

252V

Setting accuracy

± (0.05 % of set +0.05 % of rating)

Resolution

1000mV

Using FINE, OUT OFF

100mV

Using FINE, OUT ON

10mV

When using a communication interface

10mV

Line regulation

±26 mV

Load regulation

±26 mV

Transient response

2 ms or less

Ripple noise

 

p-p

100mV

rms

20mV

Rise Time

 

At full load

100 ms or less

No load

100 ms or less

Fall Time

 

At full load

150 ms

No load

1200ms

Maximum remote sensing compensation voltage (single line)

5V

Temperature coefficient

100 ppm/°C

CURRENT

 

Maximum settable current

5.25A

Setting accuracy

± (0.5 % of set +0.1 % of rating)

Resolution

20mA

Using FINE, OUT OFF

1mA

Using FINE, OUT ON

0.1mA

When using a communication interface

0.1mA

Line regulation

±2.5 mA

Load regulation

±6.0 mA

Ripple noise rms

12mA

Rise time (TYP) At full load

100ms

Fall time (TYP) At full load

100ms

Temperature coefficient

100 ppm/°C

Maximum internal resistance that can be set

36.00 Ω

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10270]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [93]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [240]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม