NF รุ่นBP-4610แหล่งจ่ายไฟสองขั้ว,Bipolar DC power supply(±60V,±10A)

NF รุ่นBP-4610แหล่งจ่ายไฟสองขั้ว,Bipolar DC power supply(±60V,±10A)
รหัสสินค้า SKU-15395
หมวดหมู่ เครื่องจ่ายไฟกระแสตรง(DC Power Supply)
ราคาปกติ 285,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 18 มิ.ย. 2566
อัพเดทล่าสุด 21 มิ.ย. 2566
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay

             The BP series is a high-voltage, high-current, high-speed bipolar power supply with a built-in sequence function. In addition to bipolar output that can be positive or negative, source (supply) or sink (absorption), it has a sequence function that allows you to freely program the output pattern. It can be used for a variety of purposes as a power supply for testing automotive electrical equipment, motors, solenoids, and large-capacity capacitors, and as an electronic load for power supply/battery testing.

  • Output voltage/output current signal monitor output
  • Measurement function Measure and display output voltage and current (DC value and pp value)
  • Output ON/OFF function
  • External analog input that can also be used with oscillators and recording signals
  • External control input/output (output ON/OFF, sequence control, etc.)
  • USB interface standard equipment
  • Store/recall memory 30 ways
  • 3-phase 3-wire or 3-phase 4-wire power input can be specified (40A model or higher)

 

BP4610

BP4620

BP4630

BP4640

BP4650

Output voltage range


Output range can be shifted from -5 V to +115 V and -115 V to +5 V by ±60 V, 120 Vp-p limiter setting

output current

DC

±10A

±20A

±30A

±40A

±50A

AC

±15A

±30A

±45A

±60A

±75A

Small signal frequency response

DC to 200 kHz (CV) *
DC to 70 kHz (CC) *

action mode

Selectable constant voltage (CV)/constant current (CC) operation

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10259]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [92]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [240]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม