-The analog display shows changing and fluctuating tensions fast and enables an optimal process adjustment
-The built-in material thickness compensator compensates different material diameters for a particular range (only DX2-1000 and higher ranges).
-Filament guide and roller shifting mechanism ensure easy acquisition of the running material
-Hand-held unit with built-in mounting holes permit fixed installation for continuous tension measurement
-Special finger support located on the rear side reduces the effort to move the outer roller assembly
-Custom-built configurations and special calibration are available
Standard Features
- Everything in operator’s view:
- the guide rollers
- the measured material
- the readings
- Each instrument is individually calibrated for highest accuracy
- 41 mm Ø scale
- Tension meter with rugged aluminium housing
- Certificate of Compliance with the order 2.1 according EN 10204s included
- Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
|
Special Features
- The analog display of tension meter DX2 shows changing and fluctuating tensions fast and enables an optimal process adjustment
- The built-in material thickness compensator compensates different material diameters for a particular range (only DX2-1000 and higher ranges).
- Filament guide and roller shifting mechanism ensure easy acquisition of the running material
- Special finger support located on the rear side reduces the effort to move the outer roller assembly
- Custom-built configurations and special calibration are available
|
Specification:
Calibration:
|
According to SCHMIDT factory procedure
|
Accuracy:
|
±1 % full scale or ±1 graduation on scale
|
Scale diameter:
|
41 mm
|
Temperature range:
|
10 – 45 ºC
|
Air humidity:
|
85 % RH, max.
|
Housing material:
|
Die-cast aluminium
|
Weight, net (gross):
|
Up to DX2-10K approx. 470 g (1000 g)
DX2-20K-L approx. 580 g (2000 g)
|
|
Scale
SCHMIDT scales are manufactured according to the most stringent quality requirements. Printed scales are not used. Instead, each scale is individually marked for the instrument involved. This ensures highest quality. Our special procedure makes it possible to provide tension meter DX2
- calibrated to custom supplied material
- fine tuned to a specific tension range
- other units of measure such as g or kg
|
