รหัสสินค้า | SKU-13289 |
หมวดหมู่ | เครื่องวัดคุณภาพน้ำแบบพกพา(Pocket Water Quality Meters),Horiba |
ราคาปกติ | |
ลดเหลือ | 0.00 บาท |
สถานะสินค้า | Pre-Order |
ลงสินค้า | 13 ก.ค. 2565 |
อัพเดทล่าสุด | 12 ส.ค. 2567 |
คงเหลือ | 1 ชิ้น |
จำนวน | ชิ้น |
Optical type adopted by JIS / ISO.
* Factory wastewater test method JIS K 0102: 2016 / International Organization for Standardization ISO 17289
Since it is an optical type (emission phase measurement method), it is easy to handle in various situations. Achieves good response without being affected by flow velocity.
Atmospheric calibration bottle is included as standard. Atmospheric calibration is possible immediately by reducing errors due to humidity effects. Also ideal for sensor storage.
Automatic salinity correction (when used with COND sensor) ・ Automatic atmospheric pressure correction is possible.
Efficiently collects external light inside the liquid crystal display. We have realized a screen that is easy to see not only in the dark but also in direct sunlight.
* Blanview is a registered trademark of Alters Technology Co., Ltd.
The sensor can be attached to the meter body.
It is easy to carry and easy to handle.
Equipped with a foldable stand on the back. Even if it is installed on the ground, the screen is easy to see and it is easy to operate.
Detachable with one touch. The sensor can be replaced smoothly.
Reliable waterproof function: IP67 equivalent (does not break down even if immersed in water at a depth of 1 m for about 30 minutes)
The double molding structure, which is made by coating polycarbonate with a soft resin, enables a body that is strong against impact and easy to grip.
Can be connected to a PC using a MicroUSB cable (commercially available).
In addition, a USB-connectable battery (commercially available) allows measurement without worrying about the battery capacity.
Seamless fieldwork from measurement to analysis.
Switch to wireless communication mode → Start Web browser → Select data → Browse by CSV file
* This product is equipped with an SD card with wireless LAN function.
* Wired communication is also possible with a commercially available MicroUSB cable.
set content:
● Carrying case
● Meter (1ch model): WQ-310J
● Optical DO sensor type: 300-D-2
● Atmospheric calibration bottle
● Protective cap
● Instruction manual
● Battery (AA type)
Measurement item | DO (mg / L) / DO (%) / O 2 / Temperature | |
DO | range of measurement | [Mg / L] 0.00-20.00mg / L [%] 0.0-200.0% |
resolution | 0.01mg / L, 0.1% | |
accuracy※ | [mg / L] ± 0.2mg / L [%] ± 2% | |
Salinity correction | Automatic correction from salinity measured by electrical conductivity sensor or manual: 0.0-40.0 PPT |
|
Atmospheric pressure correction | Automatic correction from the barometric pressure sensor installed in the meter or manual: 10.0-199.9kPa |
|
Calibration score | 2 points | |
O 2 | range of measurement | 0.0-50.0% |
resolution | 0.1% | |
accuracy | ± 0.5% | |
temperature | Concentration measurement range | ℃: -30.0 to +130.0 * DO sensor operating temperature range: 0 to 50 ℃ |
resolution | 0.1 ℃ | |
Accuracy (instrument reproducibility) | ℃: ± 0.5 | |
Calibration score | 1point | |
Sensor cable length | 2m | |
Number of channels | 1 | |
memory | 10,000 points | |
Stable judgment function | Autostable / Autohold / Instantaneous value measurement | |
Meter output | Micro USB (B): for PC connection, USB power supply phono: for printer connection |
|
Meter input | Micro USB (B): for PC connection, USB power supply push-pull connector: for sensor connection |
|
screen | Color graphic TFT-LCD (3.5 inches) | |
Waterproof / dustproof grade | IP67 equivalent | |
power supply | 4 AA batteries | |
Battery life | 100 hours or more (screen brightness: 3, power saving mode: ON, sensor not connected, alkaline battery used) | |
Meter size | 215 (L) x 90 (W) x 34 (H) mm | |
Meter weight | Approximately 400g (with batteries) / Approximately 320g (without batteries) |