skSato รุ่น SK-L754 เครื่องวัดอุณหภูมิและความชื้นสัมพัทธ์,Datalogger (temperature and humidity,seperate probe),cat.no.8870-00

■ One sensor probes selectable from two

Choose one probe based on your purpose from our two interchangeable probes. Note that one probe must be purchased separately at least.

■ Memorizes up to 16000 data

Available to record data for 4 hours with a logging interval of 1 second and for as long as 2 years and 9 months with an interval of 90 minutes.

* Maximum number of data x logging interval = maximum logging time. E.g., 16000 x 5 sec. = 22.2 hours

■ No data loss even if battery runs out

Data is securely stored in the memory to avoid losing even if there is a power failure.

■ AC/DC input compatible

This product functions well with batteries, however, it is recommended to use AC inlets for measurement in a long duration.

When the AC adapter is connected while the batteries are installed, power is supplied from AC inlet preferentially, and it switches to using the batteries in case of a problem such as blackouts.

■ Data can be copied to PC and micro SD

Logged data can not only be downloaded to a PC but also be copied to a micro SD card (sold separately). Copying can be done even when logging.

■ Data analysis software attached

Logged data can be fully utilized such as by graph plotting and real-time display. It can be also exported in CSV format to open it in a spreadsheet system.

■ Four logging mode options selectable

- Once (default)

Keeps logging until the memory becomes full. Stops logging when 16000 data are recorded.

- Repeatedly (overwriting)

Overwrites the existing data from the beginning once the 16000 data are recorded. Ideal for the case you only need to store data of the latest period.

- Ends at (limited amount)

Stops logging when the number of data reaches the limit you set. Ideal for limiting the amount of data to be collected.

- By page (partitioning)

Partition the memory into four blocks, each having the capacity to store 4000 data. Once you stop logging and restart it the data is stored in the next block, thus it is convenient to sort and manage the data of different time or locations.

■ Fourteen different logging intervals

Available logging intervals: 1, 2, 5, 10, 15, 30 seconds and 1, 2, 5, 10, 15, 30, 60, 90 minutes.

■ Scheduled logging

Available to preset the time to start logging automatically.

■ Key lock function

Prevents misoperation while in logging or in standby for preset start.

■ Warning display for upper and lower thresholds

An alarm light is lit and Hi/Lo indicator blinks if the temperature exceeds or falls below the preset thresholds. The light and the indicator turn off when the measured value falls back within the range of the set values.

■ ID number for each device

A 6-digit ID number can be set for easy identification when multiple loggers are used.

■ °C/°F switchable