รหัสสินค้า | SKU-11366 |
หมวดหมู่ | •เครื่องวัดตรวจจับก๊าซหลากหลายชนิด(Multi Portable Gas Detector) |
ราคาปกติ | |
ลดเหลือ | 0.00 บาท |
สถานะสินค้า | Pre-Order |
สภาพ | สินค้าใหม่ |
ลงสินค้า | 16 ก.พ. 2565 |
อัพเดทล่าสุด | 26 ม.ค. 2568 |
คงเหลือ | 1 ชิ้น |
จำนวน | ชิ้น |
Product category | Portable type |
---|---|
type | Combined gas detector |
Gas to be detected | Combustible gas / oxygen / hydrogen sulfide / carbon monoxide / sulfur dioxide / carbon dioxide |
Detection principle | New ceramic type (flammable gas) Constant potential electrolysis type (O 2, CO, H 2 S, SO 2 ) Non-dispersive infrared type (CO 2 ) |
Detection range | 0 to 100% LEL (flammable gas) 0 to 25.0 vol% (O 2 ) 0 to 500 ppm (CO) 0 to 30.0 ppm (H 2 S) 0 to 20 ppm (SO 2 ) 0 to 5 vol% or 0 to 10000 ppm ( CO 2 ) |
Alarm set value |
Arbitrary setting is possible up to the third alarm |
Detection method | Diffusion type |
Types of alarms | Gas alarm, failure alarm (optional) panic alarm, mandown alarm |
Alarm operation | Lamp blinking / buzzer continuous modulation ringing / gas concentration display blinking / vibration |
Explosion proof | Intrinsically safe explosion-proof structure |
Protection class | IP66 / 68 equivalent |
Various certifications | TIIS ATEX CE |
Power supply | Lithium-ion rechargeable battery or AAA alkaline battery x 2 |
Continuous use time | When the long battery mode is ON: Approximately 40 hours When the long battery mode is OFF: Approximately 25 hours (25 ° C, no alarm, no lighting) |
External dimensions / mass |
Approximately 73 (W) x 65 (H) x 26 (D) mm (excluding protrusions) |
Operating temperature and humidity range |
-40 to + 60 ° C (no sudden changes) 0 to 95% RH (no condensation) |
Gas to be detected | Detection principle | Detection range (service range) | 1 digit |
---|---|---|---|
Combustible gas (HC or CH 4 ) | New ceramic type | 0-100% LEL | 1% LEL |
Acid | Constant potential electrolysis type | 0-25.0vol% (~ 40.0vol%) | 0.1vol% |
Carbon monoxide | Constant potential electrolysis type | 0-500ppm (-2000ppm) | 1ppm |
Hydrogen sulfide | Constant potential electrolysis type | 0-30.0ppm (~ 200.0ppm) | 0.1ppm |
Sulfur dioxide (SO 2 ) | Constant potential electrolysis type | 0-20.00ppm (-100.00ppm) | 0.05ppm |
Carbon dioxide (CO 2 ) | Infrared type | 0 to 5.00vol% (~ 10.00vol%) 0 to 10000ppm | 0.01vol% 20ppm |
TYPE | Gas type to be detected |
---|---|
TYPE A | 4 components [LEL, O 2 , H 2 S, CO] |
TYPE B | 3 components [LEL, O 2 , H 2 S ] |
TYPE C | 3 ingredients [LEL, O 2 , CO ] |
TYPE CH | 3 components [LEL, O 2 , CO *] * H 2 interference reduction CO sensor |
TYPE D | 2 components [LEL, O 2 ] |
TYPE E | 2 components [ O 2 , H 2 S ] |
TYPE F | 2 ingredients [ O 2 , CO ] |
TYPE FH | 2 components [ O 2 , CO *] * H 2 interference reduction CO sensor |
TYPE I | 2 components [LEL, CO ] |
TYPE IH | 2 components [LEL, CO *] * H 2 interference reduction CO sensor |
TYPE K | 1 ingredient [ H 2 S ] |
26 types of flammable gas can be switched The settings are retained even after the power is turned on / off.
Gas type : methane / isobutane / hydrogen / methanol / acetylene / ethylene / ethane / ethanol / propylene / acetone / propane / butadiene / cyclopentane / benzene / n-hexane / toluene / n-heptane / xylene / n-nonane / ethyl acetate / Isopropyl alcohol / Methyl ethyl ketone / Methyl methacrylate / Dimethyl ether / Methyl isobutyl ketone / tetrahydrofuran