Six component concentration meter of exhaust gas. ※ standard equipped O 2 only
, standard with O 2 in addition to CO (H 2 with compensation) , low concentration CO (H 2 with compensation) , high concentration CO , NO , low concentration NO , NO 2 , SO 2 , CO 2(NDIR) sensors can be mounted. · Combustion adjustment · Combustion adjustment of burners. For research, development and experiments.
product name | Price (tax included) | |
---|---|---|
Combustion exhaust gas analyzer HT-2700 standard set |
Object to be detected: Possible to issue calibration documents with integrated oxygen and carbon monoxide CO probe in combustion exhaust gas There are four modes, and measurement of exhaust gas, atmospheric CO, draft pressure and differential pressure can be performed with one unit. ● Has a long-life battery. ● The probe is integrated with a simple function. -Set contents: Body, exhaust gas probe, AC adapter, attache case, silicon tube-Oxygen and carbon monoxide concentration measuring device-With integrated exhaust gas probe-Built-in drain tank-Display with back light-Display: Calculation indication: carbon dioxide, air ratio, Combustion efficiency, exhaust gas loss ● Draft pressure, differential pressure can be measured
product name | Price (tax included) | |
---|---|---|
Combustion exhaust gas analyzer TESTO310 |
Object to be detected: Possible to issue a calibration document of oxygen and carbon monoxide CO probe replacement type in combustion exhaust gas Color LCD screen mounted. You can replace the probe and use it for various purposes such as CO measurement and gas leak detector for indoor environment. Even when the gas sensor is exhausted, it can be replaced by the user, which helps reduce downtime.
product name | Price (tax included) | |
---|---|---|
Combustion exhaust gas analyzer TESTO320-O2CO [Test-] |
Exhaust gas oximeter . Carbon dioxide calculation. For energy saving diagnosis with law revision! Issuance of calibration documents Issuing boilers, burners, etc. Oxygen concentration measuring equipment in exhaust gases, etc. ● Measurement items (1) Oxygen concentration (2) Two temperatures (HT-1200NT only) ● Calculation items (1) Carbon dioxide concentration (2) Combustion air ratio (3) Exhaust gas loss (4) Combustion efficiency
product name | Price (tax included) | |
---|---|---|
Combustion exhaust gas analyzer HT-1200N [Hodaka test] | ||
Combustion exhaust gas analyzer HT-1200NT [Hodaka test] with exhaust gas temperature sensor | ||
AC adapter for overseas use AC100-240V | ||
Measurement software for PC HT-2084 (RS232C, USB conversion cable) |
Measuring apparatus for carbon monoxide concentration in exhaust gas, such as for inspection of boilers, heaters and oilers
High concentration of carbon monoxide can be up to 10,000 ppm. Measurement of carbon monoxide concentration (CO) peak value and average value is also possible.
With 3-stage CO alarm function. Up to 100 data can be stored with built-in data logger.
product name | Price (tax included) | |
---|---|---|
Burning exhaust gas analyzer HT-1210N [Hodaka test] | ||
Combustion exhaust gas analyzer HT-1210NT [Hodaka test] (with exhaust gas temperature sensor) |
1) Oxygen concentration (O2) 2) Carbon monoxide concentration (with CO 2 H 2 compensation) calibration document can be issued up to 10,000 ppm 3) Exhaust gas temperature 650 ° C (950 ° C)
product name | Price (tax included) | |
---|---|---|
Combustion exhaust gas analyzer HT-1300NL [Hodaka test] |
Target gas: Oxygen in combustion exhaust gas Issuable of calibration document for calibrationPossible to measure oxygen concentration at high temperature with cooling drain filterMeasurement range: 0 to 25.0 vol% alarm set value: 18.0 vol% boiler, incinerator etc For combustion management by measuring oxygen concentration in combustion exhaust gas
product name | Price (tax included) | |
---|---|---|
Combustion management oximeter XP-3180E [New Cosmos Electric] |
Maintenance products for boilers. Assess the degree of smoke from flue gas and check the combustion efficiency. Too much smoke can cause the boilers to become clogged and require frequent service visits.
Burner's "burning excess of smoke = fuel excess use" prevention Adopted. The flue gas is drawn in, and the smoke adhering to the filter paper is compared with the smoke scale to determine the smoke degree.
product name | Price (tax included) | |
---|---|---|
Smoke tester set HT-1850 [HODAKA] |
For measuring the flue gas of the combustor. Small size, light weight, automatic suction type carbon monoxide monitor
■ 7 types of measurement mode switching ■ 3 types of alarm operation switching ■ Large LCD screen ■ Measurement of general and commercial combustion appliances with one unit ■ Extension of gas introduction pipe possible
product name | Price (tax included) | |
---|---|---|
Carbon Monoxide Monitor Judgment Expert CO-FL1 [Riken Keiki] |
Target gas: Wide range of carbon monoxide concentration in combustion exhaust gas Issuable calibration document measurement range: 0 to 0.125vol% Suitable for maintenance inspection of gas water heater, water heater, etc. Since the average concentration is determined from the measurement over a fixed time, it is possible to accurately determine the trace CO concentration in the exhaust gas. With judgment lamp and alarm buzzer
product name | Price (tax included) | |
---|---|---|
Carbon monoxide measuring instrument XP-333 II [New Cosmos Electric] |
Target gas: Wide range of carbon monoxide concentration in combustion exhaust gas Possible issue of suction calibration document Measurement range: 0 to 0.499vol% Furthermore, it is most suitable for maintenance inspection of gas water heater, water heater etc. Since the average concentration is determined from the measurement over a fixed time, it is possible to accurately determine the trace CO concentration in the exhaust gas. With judgment lamp and alarm buzzer
product name | Price (tax included) | |
---|---|---|
Carbon monoxide measuring instrument XP-333 IIA [New Cosmos Electric] |
Calibration documents for gasoline motorcycles and gasoline / LPG vehicles can be issuedProvides a simple and easy measurement environment for idling exhaust gas. Conforms to Ministry of Land, Infrastructure, Transport and Tourism automobile inspection equipment technical standard, conforms to class 0 of the International Legal Metrology Convention OIML.
product name | Price (tax included) | |
---|---|---|
Automobile exhaust gas measuring instrument MEXA-584L |
Ideal for safety management of chemical substances subject to risk assessment implementation . Issuable of calibration documents
Small and light, can be put in a pocket during work shift PID lamp and sensor can be disassembled in a short time for easy maintenance without tools Large keys that can be operated with gloves on
● Standard model: 0-2000 ppm / 0.1 ppm: With data logger function
● Safety model: 0-1000 ppm / 1 ppm: Without data logger function
product name | Price (tax included) | |
---|---|---|
VOC detector ToxiRAE PRO PID (Tokirei pro PID) G02-J000-000 (with data logger) | ||
VOC detector ToxiRAE PRO PID (Tokirei pro PID) G02-J010-000 (without data logger) |
Ideal for safety management of chemical substances subject to risk assessment implementation . Calibration documents can be issued The
first domestic manufacturer to simultaneously detect up to six different gases. VOC sensor can be detected by installing a PID sensor-
Ideal for confirmation of hazards and hazards of chemical substances based on the Industrial Safety and Health Act!
More than 200 types of target chemical substances can be measured by PID sensor
・ Equipped with convenient new functions such as panic alarm function and LED light
product name | Price (tax included) |
---|---|
Portable multi gas monitor GX-6000 (RIKEN KEIKI) |