Simultaneous display and recording of CO2, temperature and humidity are possible with one unit. Possible to issue
temperature of calibration document : 0-50 ° C Humidity: 10-90% RH co2: 0-4000 ppm Installation of
SD card recording software unnecessary Large capacity data Wall mounting hole / back stand
Excel format (XLS) output AC adapter with recording interval : 5-600 seconds
product name | Price (tax included) | |
---|---|---|
Data logger CO2 concentration meter MCH-383SD J |
Only this model is capable of recording CO2 + temperature + humidity + dew point temperature + wet bulb temperature at one time without the need for probe replacement!
Both "CO2 CO2 sensor probe" and "Temperature and humidity sensor probe" can be connected simultaneously and data from 2 probes are recorded on SD card. Excel output at once together! No software installation required!
There is an alarm function of CO2. NDIR sensor adopted Calibration documentissueable
CO2 concentration measurement: 0 to 6,000 ppm humidity: 10 to 95% RH temperature: 0 to 50 ° C dew point temperature: -25.3 to 48.9 ° C
wet bulb temperature: -21.6 to 50.0 ° C with alarm function . Maximum / minimum value memory and data hold function
product name | Price (tax included) | |
---|---|---|
Data logger carbon dioxide CO2 concentration meter CO2-9904SD |
One unit can measure CO2, temperature and humidity . 20,000 data logger records.
NDIR sensor adopted. Indoor air quality (IAQ) monitor Cable length: Approximately 1.2 m
CO2 measurement range: 0-6000 ppm Temperature: -20-60 ° C Humidity: 10-95% RH
Supplied: Software, RS232 cable, AC adapter, carrying case. Convenient for multi-point CO2 concentration survey
product name | Price (tax included) | |
---|---|---|
Digital CO2 concentration meter TES-1370 (with data logger) |
3ch: Carbon dioxide CO2, temperature and humidity calibration documents can be issued
TR-76Ui : CO2 measurement: 0 to 9,999 ppm Temperature (Thermistor): 0 to + 55 ° CHumidity (polymer film resistance type): 10 to 95% RH
TR -76Ui-S : 3ch: carbon dioxide CO2, temperature, humidity
CO2 measurement: 0 to 9,999 ppm temperature (platinum resistance temperature measuring resistor ): -25 to + 70 ° C humidity (capacitance type): 0 to 99% RH
atmospheric pressure Correct the error of the measurement value caused by
Recording capacity: 8,000 x 3ch. Battery life: 2 days (without AC power) USB communication
product name | Price (tax included) | |
---|---|---|
T & D Odortori TR-76Ui CO2, temperature, humidity data logger | ||
T & D lod TR-76 Ui-S CO2 temperature and humidity meter (high accuracy) |
3 ch: carbon dioxide CO2, temperature, humidity
RTR-576: CO2 measurement: 0-9, 999 temperature (thermistor): 0- + 55 ° C. humidity (polymer film resistance type): 10 to 95% RH
RTR-576-H: CO2 Measurement: 0-9,999 Temperature (Platinum RTD): -30-+ 80 ° C Humidity (Capacitance type): 0 to 99% RH The
type with H in the model number has high accuracy wide temperature and humidity sensor
product name | Price (tax included) | |
---|---|---|
T & D Rooster RTR-576 CO2 · temperature · hygrometer wireless logger | ||
T & D Rotors RTR-576-S CO 2 · Temperature and humidity meter wireless logger |
Can issuetemperature andhumidity atmospheric CO2 calibration documents From
museum to office, Wi-Fi data logger testo 160 IAQ is ideal for monitoring indoor air quality (Indoor Air Quality) required by facility management.
product name | Price (tax included) | |
---|---|---|
Test-Wi-Fi Data Logger testo 160 IAQ |
One unit can measure CO2, temperature, humidity and dew point temperature. Two probes that can issue calibration documents
: CO2 probe, temperature and humidity probe. There is an alarm function of CO2. NDIR sensor adopted
CO2 measurement range: 0 to 4000 ppm Temperature: 0 to 50 ° C Humidity: 10 to 95% RH
Real-time output to PC. Data can be recorded as an option.
product name | Price (tax included) | |
---|---|---|
Carbon dioxide detector GCH-2018 |
Display carbon dioxide CO2 and temperature simultaneously. Adopt NDIR technology. Easy-to-see large display.
Data logger function. (24 hours, total of 48 points every 30 minutes) 4 AA alkaline batteries, AC adapter standard attachment
Memory indication of maximum / minimum value Alarm (warning sound) function. With the CE mark of relief.
product name | Price (tax included) | |
---|---|---|
CO2 measuring device MJCO2 |
Adopted by being able to actually confirm CO2 figures at CO2 reduction (carbon dioxide reduction) education sites.
Large display of CO2 concentration, temperature and humidity in the room. Stand type, also supports wall hangings.
CO2: 0-3000ppm Temperature: 0 ° C-40 ° C Humidity: 20%-90% RH
product name | Price (tax included) | |
---|---|---|
Panel type CO2 monitor MJ-CO2-A4 (ZGkb201p) |
CO2 concentration, temperature, humidity, VOCs (toluene, benzene, etc.), monitor, monitor,
hospital, school, facility such as a school, research department, clean factory, suitable for air environment measurement of vinyl house
* It can not use for building tube
product name | Price (tax included) | |
---|---|---|
Air Checker MB-530 | ||
Dry battery box (for MB-530) |
CO2 measurement range: 0 to 50,000 ppm NDIR system adopted. Stationary monitor.
Configuration of display unit and sensor unit. Large liquid crystal display
Automatic control of ventilation fan etc. by external contact (relay output) is possible. Alarm alert.
Used in chemical plant, food / beverage plant, winery / beer plant, oil / gas plant, waste treatment plant, wastewater treatment plant
product name | Price (tax included) | |
---|---|---|
CO2 installation type alarm MJ-CO2-5P | ||
Display unit (child unit) RDU for MJ-CO2-5P |
One unit can measure CO2, temperature and humidity. Voltage, current analog output possible · Relay output (1 channel)
CO2 measurement range: 0 to 2000 ppm (or 0 to 5000 ppm)
Temperature: 0 to 50 ° C Humidity: 3% RH or less (10 to 90% RH)
product name | Price (tax included) | |
---|---|---|
CO2 temperature and humidity converter CF135-RB1XXR | ||
CO2 ・ Temperature and humidity converter CF132-RB1XDR | ||
CO2 / Temperature and humidity converter CF135-RB1XDR | ||
CO2 / Temperature and humidity converter CF132-RB1XXR |
Detection range: 0 to 100 vol% Alarm setting value: 50 vol% Issuable of calibration document
Suction type. Japan Maritime Association (NK) Type Approval Product No. 06 T 605 (Required) Please specify the
target gas as carbon dioxide .
product name | Price (tax included) | |
---|---|---|
Flammable gas detector XP-3140 * for methane gas | ||
Flammable gas detector XP-3140 * for hydrogen gas | ||
Flammable gas detector XP-3140 * Helium | ||
Flammable gas detector XP-3140 * For flammable gas specification |
Liquid phase, gas phase CO2 concentration measured. Waterproof structure ( IP 67 : 1 m, can beimmersed for 30 minutes) Calibration documents can be issued
Liquid phase: CO2 measurement: 1.49-1490 mg / L Gas phase: 0.1-100% Temperature: 5-50 ° C
Memory function with 1000 data. Cable length: 1 m
product name | Price (tax included) | |
---|---|---|
Portable carbon dioxide concentration meter CGP-31 Toa dkk |
Carbon monoxide CO and carbon dioxide CO2 can be easily measured in a short time.Issuing a calibration document
Attach the gas detection tube to the gas detector and operate the handle to suction sample air.
The gas to be measured and the reagent in the detection tube react and change color.
Direct reading type that just reads graduation (ppm) of the tip of discolored layer as it is
product name | Price (tax included) | |
---|---|---|
Gastec Gas Collector Set GV-100LS | ||
Gas collector with gas tech counter GV-110S | ||
Detector tube (carbon dioxide) 2 LC containing 10 pieces | ||
Detector tube (carbon monoxide) 1 LC containing 10 pieces | ||
Detector tube (formaldehyde) 91LL contains 10 pieces | ||
Gas Tech Gas Extractor Set GV-100S |