เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10184]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [870]
Durometer according to JIS K 6253. Possible to issue calibration documents The
most widely used rubber and plastic hardness tester in the world. Fully compatible with global hardness testing standards Suitable for measuring the hardness of general rubber, elastomer, soft plastic, tire, rubber roll, rubber hose, etc.
| product name | type | Use | Spring load value | ||
|---|---|---|---|---|---|
| Rubber and plastic hardness tester GS-719N | A | General rubber | 550-8050 mN | Put in a basket | |
| Rubber and plastic hardness tester GS-719G | A stationary needle type | General rubber (for medium hardness) | 550-8050 mN | Put in a basket | |
| Rubber and plastic hardness tester GS-721N | E (AO) | Soft rubber (for low hardness) | 550-8050 mN | Put in a basket | |
| Rubber and plastic hardness tester GS-721G | E stationary needle type | Soft rubber (for low hardness) | 550-8050 mN | Put in a basket | |
| Rubber and plastic hardness tester GS-720N | D | Hard rubber (for high hardness) | 0-44450 mN | Put in a basket | |
| Rubber and plastic hardness tester GS-720G | D stationary needle type | Hard rubber (for high hardness) | 0-44450 mN | Put in a basket | |
| Rubber and plastic hardness tester GS-720R | Dφ 18 mm / Stand | Hard rubber (for high hardness) | 0-44450 mN | Put in a basket | |
| Rubber and plastic hardness tester GS-719R | Aφ 18 mm / Stand | General rubber (for medium hardness) | 550-8050 mN | Put in a basket | |
| Rubber and plastic hardness tester GS-719P | A pocket type | General rubber (for medium hardness) | 550-8050 mN |
Analog Standard Measurement surface of the calibration document, Irregular shape with few flat parts, Bottom of deep depression etc. The pressure surface of the durometer does not adhere well ( It may not be able to measure correctly). At that time, it is the deep hole (H) type that made it possible to make measurements by making the pressing surface smaller or longer. With movable needle, upper and lower limit.
| product name | type | Use | standard | Spring load value | Pressed surface mm | ||
|---|---|---|---|---|---|---|---|
| Rubber and plastic hardness tester deep hole durometer GS-720H | D | Hard rubber deep hole (thin hole) type | JIS K 6253 | 0-44450 | φ12 | |
Put in a basket |
| Rubber and plastic hardness tester deep hole durometer GS-719H | A | General rubber deep hole (thin hole) type | JIS K 6253 | 55-8050 | φ12 |
| product name | Display specification | ||
|---|---|---|---|
| Mitutoyo sponge, rubber, plastic hardness tester HH-329 [analog pointer needle] type E soft rubber | analog | Put in a basket | |
| Mitutoyo sponge, rubber, plastic hardness tester HH-330 [digital] type E soft rubber | Digital | Put in a basket | |
| Mitutoyo sponge, rubber, plastic hardness tester HH-335 [analog handpiece] type A general rubber | analog | Put in a basket | |
| Mitutoyo sponge, rubber, plastic hardness tester HH-336 [digital] type A general rubber | Digital | Put in a basket | |
| Mitutoyo sponge, rubber, plastic hardness tester HH-337 [analog hand needle] type D hard rubber | analog | Put in a basket | |
| Mitutoyo sponge, rubber, plastic hardness tester HH-338 [digital] type D hard rubber | Digital | Put in a basket |
| product name | Display specification | ||
|---|---|---|---|
| Mitutoyo sponge, rubber, plastic hardness tester HH-331 [analog hand needle] type A general rubber | analog | Put in a basket | |
| Mitutoyo sponge, rubber, plastic hardness tester HH-332 [digital] type A general rubber | Digital | Put in a basket | |
| Mitutoyo sponge, rubber, plastic hardness tester HH-333 [analog handpiece] type D hard rubber | analog | Put in a basket | |
| Mitutoyo sponge, rubber, plastic hardness tester HH-334 [digital] type D hard rubber | Digital |





Realtools Asia(ศูนย์รวมเครื่องมือวัดและชุดทดสอบอุตสาหกรรม)