Testing Item | Model | Range | Reaction Time | |
---|---|---|---|---|
Ag | Silver | WAK-Ag | 0, 0.5, 1, 2, ≥5 mg/L | 3 min. |
Al | Aluminum | WAK-Al | 0, 0.05, 0.1, 0.2, 0.5, 1 mg/L | 1 min. |
Au | Gold | WAK-Au | 0, 2, 5, 10, 20 mg/L | 30 sec. |
B(C) | Boron (High Range) | WAK-B(C) | 0, 5, 10, 20, 50, 100 mg/L | 10 min. |
B | Boron | WAK-B | 0, 0.5, 1, 2, 5, 10 mg/L | 30 min. |
Cblt | Cobalt | WAK-Cblt | 0, 0.5, 1, 2, 5, ≥10 mg/L | 3 min. |
Cl(300) | Chloride (300) | WAK-Cl(300) | ≤200, about 250, ≥300 mg/L | 10 sec. |
Cl(200) | Chloride (200) | WAK-Cl(200) | ≤100, about 150, ≥200 mg/L | 10 sec. |
Cl(D) | Chloride (Low Range) | WAK-Cl(D) | 0, 2, 5, 10, 20, ≥50 mg/L | 1 min. |
ClO(C) | Residual Chlorine (High Range) | WAK-ClO(C) | 5, 10, 20, 30, 50, 100, 150, 200, 300, 600, ≥1000 mg/L | 10 sec. |
ClO·DP | Residual Chlorine (Free) | WAK-ClO·DP | 0.1, 0.2, 0.4, 1, 2, 5 mg/L | 10 sec. |
T·ClO | Total Residual Chlorine | WAK-T·ClO | 0.1, 0.2, 0.4, 1, 2, 5 mg/L | 2 min. |
ClO2 | Chlorine Dioxide | WAK-ClO2 | 0.2, 0.4, 0.6, 1, 2, 5, 10 mg/L | 10 sec. |
NaClO2 | Sodium Chlorite | WAK-NaClO2 | 5, 10, 20, 50, 100, 150, 200, 300, 500, ≥1000 mg/L | 10 sec. |
NaClO2(D) | Sodium Chlorite (Low Range) | WAK-NaClO2(D) | 0.1, 0.2, 0.5, 1, 2, 5 mg/L | 1 min. |
CN | Free Cyanide | WAK-CN-2 | ≤0.02, 0.05, 0.1, 0.2, 0.5, 1, 2 mg/L | 8 min. |
COD(H) | COD (High Range) | WAK-COD(H)-2 | 0, 30, 60, 120, 200, ≥250 mg/L | 5 min. |
COD | COD | WAK-COD-2 | 0, 5, 10, 13, 20, 50, 100 mg/L | 5 min. |
COD(D) | COD (Low Range) | WAK-COD(D)-2 | 0, 2, 4, 6, ≥8 mg/L | 5 min. |
Cr6+ | Chromium (Hexavalent) | WAK-Cr6+ | 0.05, 0.1, 0.2, 0.5, 1, 2 mg/L | 2 min. |
Cr·T | Total Chromium | WAK-Cr·T | 0.5, 1, 2, 5, 10, 20 mg/L | 5.5 min. |
CS | Cationic Surfactants | WAK-CS | 0, 5, 10, 20, ≥50 mg/L | 5 min. |
Cu | Copper | WAK-Cu | 0.5, 1, 2, 3, 5, ≥10 mg/L | 1 min. |
CuM | Copper (DDTC) | WAK-CuM | 0.5, 1, 3, 5, 10 mg/L | 2 min. |
F | Fluoride (Free) | WAK-F | 0, 0.4, 0.8, 1.5, 3, ≥8 mg/L | 10 min. |
Fe | Iron | WAK-Fe | 0.2, 0.5, 1, 2, 5, 10 mg/L | 2 min. |
Fe(D) | Iron (Low Range) | WAK-Fe(D) | 0.05, 0.1, 0.3, 0.5, 1, 2 mg/L | 2 min. |
Fe2+ | Iron (Divalent) | WAK-Fe2+ | 0.2, 0.5, 1, 2, 5, 10 mg/L | 30 sec. |
Fe2+(D) | Iron (Divalent) (Low Range) | WAK-Fe2+(D) | 0.1, 0.2, 0.5, 0.8, 1.2, 2.5 mg/L | 30 sec. |
Fe3+ | Iron (Trivalent) | WAK-Fe3+ | 2, 5, 10, 20, 50, 100 mg/L | 30 sec. |
FOR | Formaldehyde | WAK-FOR | 0, 0.1, 0.2, 0.3, 0.5, 1, 2 mg/L | 4 min. |
GLU | Glucose | WAK-GLU | 0, 0.1, 0.2, 0.5, 1, 2mg/100mL 0, 1, 2, 5, 10, 20 mg/L |
10 min. |
H2O2(C) | Hydrogen Peroxide (High Range) |
WAK-H2O2(C) | 3, 7, 13, 20, 35, 70, 100, 130, 200, 400, 700 mg/L | 20 sec. |
H2O2 | Hydrogen Peroxide | WAK-H2O2 | 0.05, 0.1, 0.2, 0.5, 1, 2, 5 mg/L | 1 min. |
HYD | Hydrazine | WAK-HYD | 0.05, 0.1, 0.2, 0.5, 1, 2 mg/L | 10 min. |
MAL | M-Alikalinity | WAK-MAL | 0, 20, 30, 40, 50, 60, 80, ≥100 CaCO3 mg/L | 20 sec. |
Me | Metals (Cu, Zn, Mn, Ni, Cd) | WAK-Me | 0, 0.2, 0.5, 1, 2, ≥5 mg/L | 1 min. |
Mg | Magnesium | WAK-Mg | 0, 1, 2, 5, 10, 20 mg/L | 1 min. |
Magnesium Hardness | 0, 4.1, 8.2, 20.5, 41, 82 mg/L | |||
Mn | Manganese | WAK-Mn | 0.5, 1, 2, 5, 10, 20 mg/L | 30 sec. |
Mo | Molybdenum | WAK-Mo | 5, 10, 20, 50, 100, 200, 500 mg/L | 1 min. |
NH4(C) | Ammonium (High Range) | WAK-NH4(C)-2 | 0, 0.5, 1, 2, 5, 10, ≥20 mg/L | 10 min. |
Ammonium-Nitrogen (High Range) | 0, 0.5, 1, 2, 5, 10, ≥20 mg/L | |||
NH4 | Ammonium | WAK-NH4-2 | 0.2, 0.5, 1, 2, 5, 10 mg/L | 5 min. |
Ammonium-Nitrogen | 0.2, 0.5, 1, 2, 5, 10 mg/L | |||
Ni | Nickel | WAK-Ni | 0.5, 1, 2, 5, 10 mg/L | 2 min. |
Ni(D) | Nickel (DPM) | WAK-Ni(D) | 0.3, 0.5, 1, 2, 5, 10 mg/L | 2 min. |
NO2(C) | Nitrite (High Range) | WAK-NO2(C) | 16, 33, 66, 160, 330, ≥660 mg/L | 5 min. |
Nitrite-Nitrogen (High Range) | 5, 10, 20, 50, 100, ≥200 mg/L | |||
NO2 | Nitrite | WAK-NO2 | 0.02, 0.05, 0.1, 0.2, 0.5, 1 mg/L | 2 min. |
Nitrite-Nitrogen | 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5 mg/L | |||
NO3(C) | Nitrate (High Range) | WAK-NO3(C) | 90, 225, 450, 900, 2250, 4500 mg/L | 5 min. |
Nitrate-Nitrogen (High Range) | 20, 50, 100, 200, 500, 1000 mg/L | |||
NO3 | Nitrate | WAK-NO3 | 1, 2, 5, 10, 20, 45 mg/L | 3 min. |
Nitrate-Nitrogen | 0.2, 0.5, 1, 2, 5, 10 mg/L | |||
O3 | Ozone | WAK-O3 | 0.1, 0.2, 0.5, 1, 2, 5 mg/L | 1 min. |
PAL | P-Alikalinity | WAK-PAL | 0, 100, 200, 300, 400, 500, 600 CaCO3 mg/L | 20 sec. |
Pd | Palladium | WAK-Pd | 1, 2, 5, 10, 20, 30, 50 mg/L | 1 min. |
pH | pH | WAK-pH | pH 5.0 - 9.5 0.5 increment 10 step | 20 sec. |
TBL | pH-TBL | WAK-TBL | pH 1.6 - 3.4 0.2 increment 10 step | 20 sec. |
BCG | pH-BCG | WAK-BCG | pH 3.6 - 6.2 0.2 increment 14 step | 20 sec. |
BTB | pH-BTB | WAK-BTB | pH 5.8 - ≥8.0 0.2 increment 12 step | 20 sec. |
PR | pH-PR | WAK-PR | pH ≤6.2 - ≥8.8 12step | 20 sec. |
TBH | pH-TBH | WAK-TBH | pH 8.2 - 9.6 0.2 increment 7 step | 20 sec. |
ANC | pH-Anthocyanin | ZAK-ANC * | pH 2 - 13 1 increment 12 step | 1 min. |
PNL | Phenol | WAK-PNL | 0, 0.2, 0.5, 1, 2, 5, 10 mg/L | 8 min. |
PO4(C) | Phosphate (High Range) | WAK-PO4(C) | 2, 5, 10, 20, 50, 100 mg/L | 1 min. |
Phosphate-Phosphorus (High Range) |
0.66, 1.65, 3.3, 6.6, 16.5, 33 mg/L | |||
PO4 | Phosphate | WAK-PO4 | 0.2, 0.5, 1, 2, 5, 10 mg/L | 1 min. |
Phosphate-Phosphorus | 0.1, 0.2, 0.5, 1, 2, 5 mg/L | |||
PO4(D) | Phosphate (Low Range) | WAK-PO4(D) | 0.05, 0.1, 0.2, 0.5, 1, 2 mg/L | 5 min. |
Phosphate-Phosphorus (Low Range) |
0.02, 0.05, 0.1, 0.2, 0.5, 1 mg/L | |||
PP | Polyphenol | ZAK-PP * | 0.2, 0.5, 1, 1.5, 2 mg/100mL | 3 min. |
RC | Tannin in Green Tea | ZAK-RC * | 1, 2, 5, 10, ≥20 mg/100mL | 1 min. |
S | Sulfide (Hydrogen Sulfide) | WAK-S | 0.1, 0.2, 0.5, 1, 2, 5 mg/L | 3 min. |
SiO2 | Silica | WAK-SiO2 | 5, 10, 20, 50, 100, 200 mg/L | 6.5 min. |
SiO2(D) | Silica (Low Range) | WAK-SiO2(D) | 0.5, 1, 2, 5, 10, 20 mg/L | 6.5 min. |
SO3(C) | Sulfite (High Range) | WAK-SO3(C) | 50, 100, 200, 500, 1000, 2000 mg/L | 10 sec. |
SO4(C) | Sulfate (High Range) | WAK-SO4(C) | 50, 100, 200, 500, 1000, ≥2000 mg/L | 10 sec. |
TH | Total Hardness | WAK-TH | 0, 10, 20, 50, 100, 200 mg/L | 30 sec. |
TN-i | Total Nitrogen (Inorganic) | WAK-TN-i-2 | 0, 5, 10, 25, 50, 100 mg/L | 20 min. |
VC | Vitamin C | WAK-VC-2 | 0.1, 0.2, 0.5, 1, 2, ≥4 mg/100mL | 3 min. |
L-Ascorbic Acid | 1, 2, 5, 10, 20, ≥40 mg/L | |||
Zn | Zinc | WAK-Zn | 0, 0.2, 0.5, 1, 2, ≥5 mg/L | 1 min. |
Zn(D) | Zinc (Low Range) | WAK-Zn(D) | 0, 0.05, 0.1, 0.2, 0.5, 1, ≥2 mg/L | 6 min. |
Pretreatment Reagent |
Product Name | Model | Quantity (pcs./box) | Note |
---|---|---|---|
Pretreatment Reagent for Total Chromium |
Cr-RA | about 100 tests | Required to measure Total Chromium using PACKTEST Chromium (Hexavalent). |
Pretreatment Reagent for Nitrate |
NO3-RA | 50 tests | Required when Nitrite co-exists in the sample while using PACKTEST Nitrate for measurement. |
Diluted Sulfuric Acid | WAS-D-SO4 | 20mL | To neutralize the sample when necessary, and for acid treatment upon measuring the metal ions. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Copper WAK-Cu (50 times) ● Copper in the ionic state (Cu ^ + / Cu ^ 2 +) in the inspection water such as factory wastewater and tap water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Hypochlorous acid test paper (high concentration) WAP-ClO (C) (50 sheets) It can be measured immediately by immersing it in water. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Hypochlorous acid test paper (low concentration) WAP-ClO (D) (50 sheets) It can be measured immediately by immersing it in water. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Ammonium (drainage) WAK-NH4 (C) -4 (50 times) WAK-NH4 (C) successor product We have renewed the specifications to non-applicable deleterious substances. It has been changed from 2 operations including liquid reagents to 1 operation using only the conventional pack test tube. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Residual chlorine (free) WAK-ClO / DP (50 times) ● Free residual chlorine in tap water, pool water, etc. can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test COD (250) (Chemical oxygen demand) WAK-COD (H) -2 (50 doses) WAK-COD (H) successor product We have renewed the specifications to non-applicable deleterious substances. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Nitrite / nitrite nitrogen KR-NO2 (150 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Ammonium WAK-NH4-4 (50 doses) WAK-NH4 has been renewed to the specifications of non-applicable products. It has been changed from 2 operations including liquid reagents to 1 operation using only the conventional pack test tube. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Nitrite / nitrite nitrogen WAK-NO2 (50 times) ● Ionized nitrite (NO2 ^-) and nitrite nitrogen (NO2 ^-N) in the test water such as factory wastewater and environmental water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Zinc WAK-Zn (50 times) ● You can easily measure zinc in the ionic state (Zn ^ 2 +) of water such as factory wastewater and tap water. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Nitric acid / nitrate nitrogen WAK-NO3 (50 times) ● Nitrate and nitrate nitrogen (NO3 ^-N) in the ionic state (NO3 ^-) of the test water such as factory wastewater and environmental water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Residual chlorine (high concentration) WAK-ClO (C) (50 times) ● High-concentration total residual chlorine, which is a combination of free residual chlorine and combined residual chlorine in the test water, can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Hexavalent chromium KR-Cr6 + (150 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Fluorine (free) WAK-F (50 times) ● Suitable for water inspection with few coexisting substances such as distilled separation extract and natural water. ● Fluorine in the ionic state (F ^-) in the test water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Nitric acid / nitrate nitrogen KR-NO3 (150 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Total residual chlorine WAK-T / ClO (50 times) ● Total residual chlorine (free residual chlorine + combined residual chlorine) in the test water such as tap water and pool water can be measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Residual chlorine (free) KR-ClO / DP (150 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Phosphoric acid / Phosphoric acid phosphorus WAK-PO4 (40 times) ● Phosphate ion state (PO4 ^ 3-) in the test water such as factory wastewater can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Hexavalent chromium WAK-Cr6 + (50 times) ● Hexavalent chromium in inspection water such as factory wastewater and environmental water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Total nitrogen (inorganic) WAK-TN-i-3 (40 times) WAK-TN ・ i has been renewed to the specifications of non-applicable products that are successors to deleterious substances. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test COD (Chemical Oxygen Demand) ZAK-COD-2 (10 doses) WAK-COD has been renewed to the specifications of non-applicable products that are successors to deleterious substances. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Hydrogen peroxide WAK-H2O2 (50 times) ● It is possible to measure hydrogen peroxide during detection, such as residual inspection in food factories. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test COD (Chemical Oxygen Demand) WAK-COD-2 (50 doses) WAK-COD has been renewed to the specifications of non-applicable products that are successors to deleterious substances. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Ammonium KR-NH4-4 (150 doses) KR-NH4 has been renewed to specifications that are not applicable to the successor to deleterious substances. It has been changed from 2 operations including liquid reagents to 1 operation using only the conventional pack test tube. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test COD (low concentration) (chemical oxygen demand) WAK-COD (D) -2 (50 doses) WAK-COD (D) successor product We have renewed the specifications to non-applicable deleterious substances. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Zinc (low concentration) WAK-Zn (D) (40 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Phosphoric acid / Phosphoric acid phosphorus KR-PO4 (120 times)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Manganese WAK-Mn (50 times) ● Manganese in the ionic state of 2 to 7 valences in the test water such as factory wastewater and environmental water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Potassium permanganate consumption WAK-PMD-2 (50 doses) WAK-PMD has been renewed to specifications that are not applicable to the successor to deleterious substances. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Free cyanide WAK-CN-2 (40 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Total hardness (total hardness) WAK-TH (50 times) ● Calcium and magnesium in the ionic state (Ca ^ 2 + ・ Mg ^ 2 +) can be easily measured as the total hardness or total hardness (mg / L) as the sum of calcium hardness and magnesium hardness in the test water of drinking water, etc. I will. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Zinc KR-Zn (150 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Nickel (DPM) WAK-Ni (D) (50 times)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Nitric acid (high concentration), nitrate nitrogen (high concentration) WAK-NO3 (C) (50 times) ● Ionized nitric acid (NO3 ^-) and nitrate nitrogen (NO3 ^-N) in the inspection water such as factory wastewater can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Nickel WAK-Ni (50 times) ● Nickel in the ionic state (Ni ^ 2 +) in the inspection water such as factory wastewater can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Hydrogen peroxide (high concentration) WAK-H2O2 (C) (50 doses) ● It is possible to measure hydrogen peroxide during detection, such as residual inspection in food factories. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Phenol WAK-PNL (40 doses) ● Phenols (C6H5OH) in the test water such as factory wastewater and process water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Phosphoric acid (low concentration) / Phosphoric acid phosphorus (low concentration) WAK-PO4 (D) (40 doses) ● Phosphate ions (PO4 ^ 3-) and phosphate phosphorus (PO4 ^ 3--P) in water with few coexisting substances such as river water, groundwater, and drinking water can be easily measured without using strong acid. I will. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Phosphoric acid (high concentration) / Phosphoric acid phosphorus (high concentration) WAK-PO4 (C) (40 doses) ● Phosphate ions (PO4 ^ 3-) and phosphate phosphorus (PO4 ^ 3--P) in the test water can be easily measured in septic tanks and hydroponic nutrient solutions. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Ozone WAK-O3 (50 times) ● Ozone during detection can be easily measured, such as for residual inspection in food factories. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test silica (low concentration) WAK-SiO2 (D) (40 doses) ● Silica (silicic acid) in the ionic state (SiO3 ^ 2-) in the test water such as factory wastewater and environmental water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Arsenic (low concentration) SPK-As (D) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test COD (low concentration) (chemical oxygen demand) ZAK-COD (D) -2 (10 doses) WAK-COD (D) successor product We have renewed the specifications to non-applicable deleterious substances. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Chloride (low concentration) WAK-Cl (D) (40 doses) ● Chloride ions (Cl ^-) in inspection water such as factory wastewater and environmental water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement All cyan No.46 LR-CNT (40 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Nitrite / Nitrite Nitrogen No.18 LR-NO2 (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test COD (Chemical Oxygen Demand) KR-COD-2 (150 doses) We have renewed the specifications of the successor to KR-COD, which is not applicable to deleterious substances. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Ammonium / ammonium nitrogen No.17A LR-NH4-A-2 (30 doses) LR-NH4-A The successor product has been renewed to the non-applicable product specifications. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test pH (PH) WAK-pH (50 doses) ● Suitable for measuring well water, tap water, spring water, river and lake water, rain, etc., which have weak buffering properties. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Sodium chlorite WAK-NaClO2 (40 doses)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Tokuyo River Water Survey Set TZ-RW-3 (10 times) The TZ-RW successor product has been renewed to specifications that are not applicable to deleterious substances. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Free cyan KR-CN-2 (120 doses)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Aluminum WAK-Al (40 times) ● Aluminum in the ionic state (Al ^ 3 +) in the test water such as process water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Nitrite / nitrite nitrogen ZAK-NO2 (10 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Iron (low concentration) WAK-Fe (D) (50 doses) ● You can easily measure iron in the ionic state (Fe ^ 2 +, Fe ^ 3 + = dissolved iron) in the test water such as tap water. |
![]() |
Replenishment ampoule for dissolved oxygen DO meter R-7512 (30) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Iron KR-Fe (150 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Nitric acid / nitrate nitrogen ZAK-NO3 (10 times)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Sulfide (hydrogen sulfide) WAK-S (40 doses) ● Hydrogen sulfide (H2S), hydrogen sulfide ion (HS ^-), and sulfide ion (S ^ 2-) can be easily measured in the test water such as factory wastewater and environmental water. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test silica WAK-SiO2 (40 times) ● Silica (silicic acid) in the ionic state (SiO3 ^ 2-) in the test water such as factory wastewater and environmental water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Anionic Surfactant Measurement Set WA-DET ● Anionic surfactants such as tap water and river water can be measured in just 3 minutes. ● This measurement method was devised by Professor Yoshinori Kamatani of Kogakuin University. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement COD No.44 LR-COD-B-2 (30 times) LR-COD-B has been renewed to specifications that are not applicable to the successor deleterious substances. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Chloride (300) WAK-Cl (300) (40 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Boron WAK-B (50 times) ● Borax in the state of borax (sodium tetraborate) and boric acid in the test water such as factory wastewater, tap water, and environmental water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test lead set SPK-Pb (20 times)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test M Alkaliity WAK-MAL (50 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Dissolved Oxygen (DO) Kit AZ-DO-30 (30 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test All chrome WAK-Cr ・ T (40 times) ● You can easily measure all chromium (3 / hexavalent chromium) in the inspection water such as factory wastewater. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Iron (low concentration) KR-Fe (D) (150 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Nitrite (high concentration) / Nitrite nitrogen (high concentration) WAK-NO2 (C) (50 doses) ● Ionized nitrite (NO2 ^-) and nitrite nitrogen (NO2 ^-N) in the inspection water such as factory wastewater can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Dissolved Oxygen (DO) Kit AZ-DO-10 (10 doses)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test COD (low concentration) (chemical oxygen demand) KR-COD (D) -2 (150 doses) KR-COD (D) successor product We have renewed the specifications to non-applicable deleterious substances. |
![]() |
Pack test Iron WAK-Fe (50 times) ● You can easily measure iron in the ionic state (Fe ^ 2 +, Fe ^ 3 + = dissolved iron) in the test water such as factory wastewater and environmental water. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Phosphate / Phosphate phosphorus (low concentration) ZAK-PO4 (D) (10 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack Test Zoom Manganese ZM-Mn (40 times) ● It is possible to measure trace components in water in a short time on site. ● It is several tens of times more sensitive than the conventional pack test. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Divalent iron WAK-Fe2 + (50 times) ● You can easily measure iron in the divalent ionic state (Fe ^ 2 +) in the test water such as factory wastewater and environmental water. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Hydrazine WAK-HYD (40 times) ● Hydrazine (N2H4) [hydrazineium ion (N2H5 ^ +)] in the test water such as boiler water and process water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Fluorine (free) No.13B LR-FB (40 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Drop test Calcium hardness WAD-Ca (about 70 times)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack Test Zoom Silica ZM-SiO2 (40 times) ● It is possible to measure trace components in water in a short time on site. ● It is several tens of times more sensitive than the conventional pack test. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Ammonium ZAK-NH4-4 (10 doses) ZAK-NH4 has been renewed to the specifications of non-applicable products. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Chloride No.10 LR-Cl (50 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Sodium chlorite (low concentration) WAK-NaClO2 (D) (40 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Residual chlorine (free) No.11B LR-ClO / DP (50 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test pH (PH) KR-pH (150 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Nitric acid / nitrate nitrogen No.19 LR-NO3 (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test ferrous iron (low concentration) WAK-Fe2 + (D) (50 doses) ● You can easily measure iron in the divalent ionic state (Fe ^ 2 +) in the test water such as factory wastewater and environmental water. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Total amount of metal (5 types) WAK-Me (50 times)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Drop test Total hardness WAD-TH (for about 100 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Acid rain (pH-BCG) WAK-BCG (50 times) ● Suitable for measuring acid rain, well water with weak cushioning, tap water, pouring water, river and lake water, rain, etc. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Boron (high concentration) WAK-B (C) (40 doses)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Total nitrogen reagent TNP-NR (40 times)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Magnesium WAK-Mg-2 (50 doses) WAK-Mg has been renewed to the specifications of non-applicable products that are successors to deleterious substances. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test COD (10000) WAK-COD-WR (50 times) You can measure the COD of river water and factory effluent. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Free cyanide No.14B LR-CN-B (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Residual chlorine (free) ZAK-ClO / DP (10 times)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Digital Pack Test Multi SP DPM-MTSP Successor to Digital Pack Test Multi (DPM-MT) Equipped with 79 calibration curves corresponding to measurement reagents such as pack test Concentration measurement, absorbance measurement, spectrum measurement, time scan measurement are possible Up to 4 samples 4 items in parallel In addition to the dedicated cup (digital pack test cell 1.5 mL), 10 mm cell (square type) and semi-micro cell can also be used. Calibration curve data can be downloaded from the manufacturer's website. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack Test Cation Surfactant WAK-CS (50 doses)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Sulfurous acid (high concentration) WAK-SO3 (C) (50 doses) ● High-concentration sulfite ion (SO3 ^ 2-) in the test water can be easily measured in the reduction treatment process. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Drop test P Alkaline WAD-AL-P (about 100 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Chlorine dioxide WAK-ClO2 (40 times) ● Chlorine dioxide (ClO2) in the test water such as tap water and pool water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Sulfate No.16 LR-SO4 (50 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack Test Zoom Hexavalent Chrome ZM-Cr6 + (40 times) ● It is possible to measure trace components in water in a short time on site. ● It is several tens of times more sensitive than the conventional pack test. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Copper No.50 LR-50Cu (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Chloride (200) WAK-Cl (200) (40 doses)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Sulfate (high concentration) WAK-SO4 (C) (40 doses) This product can easily visually measure sulfate ions (SO42-) in the test water. It is useful for circulating fluid management of biological desulfurization equipment, boiler water management for the purpose of preventing pipe corrosion, and hot spring water measurement. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Well water inspection set AZ-2W-2 (1 time) AZ-2W has been renewed to specifications that are not applicable to the successor to deleterious substances. |
![]() |
Kyoritsu Institute of Physical and Chemical Research River water survey set AZ-RW-3 (2 times) AZ-RW has been renewed to specifications that are not applicable to the successor to deleterious substances. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Round cell bottle for digital pack test multi-SP MCM-VIAL
|
![]() |
Kyoritsu Institute of Physical and Chemical Research BOD set (for rivers) BOD-K BOD-K can easily measure river BOD simply by collecting river water and comparing the DO value at the time of collection and after 5 days. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack Test Zoom Copper ZM-Cu (40 times) ● It is possible to measure trace components in water in a short time on site. ● It is several tens of times more sensitive than the conventional pack test. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Molybdenum WAK-Mo (50 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Formaldehyde WAK-FOR (40 times) ● Formaldehyde (HCHO) in inspection water such as factory wastewater and process water can be easily measured. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test pH-BTB WAK-BTB (50 doses) ● Suitable for measuring well water, tap water, spring water, river and lake water, rain, etc., which have weak buffering properties. |
![]() |
Kyoritsu Institute of Physical and Chemical Research DPR Reagent Sulfate DPR-SO4 (100 doses)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test pH (PH) ZAK-pH (10 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Digital pack test Hexavalent chromium DPM2-Cr6 + This product can measure hexavalent chromium in various inspection waters, including factory wastewater and environmental water, with a simple operation. By using the data transmission software DPM-DTC Import, you can import past data to your computer or tablet. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Hydrogen peroxide No.45B LR-H2O2-B (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test pH-TBH WAK-TBH (50 doses) ● Suitable for measuring water with weak buffering properties. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Phosphoric acid / Phosphoric acid phosphorus No.12 LR-PO4 (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research DPR reagent DPR-TP (40 doses)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Vitamin C / ascorbic acid WAK-VC-2 (40 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research DPR Reagent Arsenic DPR-As (20 doses)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Green tea tannin ZAK-RC (10 times)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Digital pack test Ammonium / ammonium nitrogen DPM2-NH4 This product can easily measure the ionic state of ammonium (NH4 +) in water with few coexisting substances such as river water, groundwater, and drinking water. By using the data transmission software DPM-DTC Import, you can import past data to your computer or tablet. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Digital Pack Test Nitrate / Nitrate Nitric Acid DPM2-NO3 This product can measure ionic nitrate (NO3-) in various test waters such as factory wastewater and environmental water with a simple operation. By using the data transmission software DPM-DTC Import, you can import past data to your computer or tablet. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Digital pack test silica DPM2-SiO2 This product can measure ionic silica (SiO32-) in various test waters, including factory wastewater and environmental water, with a simple operation. By using the data transmission software DPM-DTC Import, you can import past data to your computer or tablet. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Digital turbidity meter DTC-4DG No reagents are required for measurement. Ideal for water quality maintenance such as water tanks, waterworks (waterworks), simple private waterworks, swimming pools, and public baths. A palm-sized compact water quality meter. Turbidity and chromaticity can be measured at the same time, and the display can be switched with a single touch. By using the data transmission software DPM-DTC Import, you can import past data to your computer or tablet. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack Test ® (Simple water quality inspection device) Copper (drainage) WAK-CuM-2 It is possible to easily measure copper in various ionic states (Cu2 +) in various inspection waters, including factory wastewater (uniform wastewater standard: 3 mg / L). In particular, it can measure divalent ions bound to EDTA, making it an ideal product for measuring chemical copper-plated wastewater. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Drop test Chloride WAD-Cl (approx. 100 doses)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test pH-PR (for water supply) WAK-PR (50 times)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Iron (low concentration) ZAK-Fe (D) (10 doses)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Oil content measurement reagent set WA-OIL
|
![]() |
Kyoritsu Institute of Physical and Chemical Research DPR Reagent DPR-TN (50 doses)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Oil content meter set WA-OIL-S
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Hexavalent chromium No.31 LR-Cr6 + (50 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Silver WAK-Ag (50 times) ● You can easily measure silver in the ionic state (Ag ^ +) of water such as factory wastewater and process water. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Digital pack test Hydrogen peroxide (high concentration) DPM2-H2O2-C This product can measure hydrogen peroxide in various test waters with a simple operation, such as residual test in food factories. By using the data transmission software DPM-DTC Import, you can import past data to your computer or tablet. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Digital pack test pretreatment agent Cr-RA
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Nickel KR-Ni (150 times)
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement All chrome No.40 LR-CrT (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Boron No.39 LR-B (25 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Manganese No.28 LR-Mn (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Transparency Meter Digital Clean Measure DCM-200 |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Zinc ZAK-Zn (10 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Digital pack test arsenic DPM2-As This product can measure arsenate and arsenite ions. However, please note that it is not possible to measure when phosphate ions coexist in an amount of 1 mg / L or more. By using the data transmission software DPM-DTC Import, you can import past data to your computer or tablet. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Digital pack test Sodium chlorite (low concentration) DPM2-NaClO2-D This product can measure sodium chlorite in various test waters with a simple operation. By using the data transmission software DPM-DTC Import, you can import past data to your computer or tablet. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Digital pack test Ferric DPM2-Fe3 + This product can measure ferric iron (Fe3 +) in the ionic state of various water samples with a simple operation. By using the data transmission software DPM-DTC Import, you can import past data to your computer or tablet. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Digital pack test Sulfate DPM2-SO4 This product can measure sulfate ions in various test waters, including rainwater and environmental water. By using the data transmission software DPM-DTC Import, you can import past data to your computer or tablet. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Absorbance meter RGB DPM2-ABS It is an absorptiometer that uses an LED as a light source. By using the data transmission software DPM-DTC Import, you can import past data to your computer or tablet. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Whole phosphorus reagent TNP-PR (40 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Muddy chromaticity meter WA-PT-4S |
![]() |
Kyoritsu Institute of Physical and Chemical Research pH test paper BCG PHG-BCG (200 sheets) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Flow analyzer Cyan FIA-CN Compatible with JIS K 0102 factory wastewater test method Compact integrated type (liquid feed pump, reaction constant temperature bath, detector) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Iron divalent (low concentration) No.29D LR-Fe2 + -D (40 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Formaldehyde No.51 LR-FOR (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Residual chlorine (high concentration) No.11C LR-ClO-C (40 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Cobalt WAK-Cblt (40 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Total Nitrogen / Total Phosphorus SP Set (High Pressure) TNP-MTSP A set of high-pressure decomposer, reagents, and measuring machine for pretreatment. The high-pressure decomposer uses a small and simple high-pressure cooker instead of the high-pressure steam sterilizer specified in JIS K 0102. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Iron No.41B LR-FeT-B (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Paper pH measurement set MPC-TBPB (for about 200 times) From September 01, 2018, the standard color protective material has been renewed from glass to safe plastic. There is no change in usage. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Digital pack test Dissolved oxygen DPM2-DO It is a handy type single item water quality meter. |
![]() |
Kyoritsu Institute of Physical and Chemical Research All cyanide (low concentration) set WA-CNT (L) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Flow analyzer Hexavalent chromium FIA-Cr6 + Compatible with JIS K 0102 factory wastewater test method Compact integrated type (liquid feed pump, reaction constant temperature bath, detector) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Copper ZAK-Cu (10 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Drop test P Acidity WAD-AC-P (approx. 100 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Delicious water inspection set AZ-DK (5 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test gold WAK-Au (40 times) ● You can easily measure the ionic state (AuCl4 ^-) gold in the inspection water such as factory wastewater and process water. |
![]() |
Kyoritsu Institute of Physical and Chemical Research All cyanide tester WA-CNT |
![]() |
Kyoritsu Institute of Physical and Chemical Research BOD set (for drainage) BOD-H2 In BOD measurement of factory wastewater, etc., the BOD value may be large, so it is necessary to prepare the sample such as appropriate dilution and handle the obtained measurement results accurately. With this set, you can measure the BOD of wastewater from a 5-day DO change using an easy-to-understand and detailed manual and simplified reagents and measuring instruments. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Flow analyzer Phosphate phosphorus FIA-PO4 Compatible with JIS K 0102 factory wastewater test method Compact integrated type (liquid feed pump, reaction constant temperature bath, detector) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Sulfide (hydrogen sulfide) No.53 LR-S (25 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Drop test M Acidity WAD-AC-M (about 100 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Paper pH measurement set MPC-TB (for about 200 times) From September 01, 2018, the standard color protective material has been renewed from glass to safe plastic. There is no change in usage. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Copper (drainage) WAK-CuM (50 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Ferric WAK-Fe3 + (50 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Drop test M Alkaline WAD-AL-M (approx. 100 times) |
Kyoritsu Institute of Physical and Chemical Research Soil oil reagent set (detector sold separately) SOA-OIL-NM |
|
![]() |
Kyoritsu Institute of Physical and Chemical Research pH test paper PLS PHG-PLS (200 sheets) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Copper KR-Cu (150 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Ozone No.54 LR-O3 (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research DPR Reagent Hexavalent Chromium / Low Concentration DPR-Cr6 + D (20 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Phenol No.7 LR-PNL (30 doses) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Total hardness (total hardness) ZAK-TH (10 times) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Paper pH measurement set MPC-BCP (for about 200 times) From September 01, 2018, the standard color protective material has been renewed from glass to safe plastic. There is no change in usage. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Paper pH measurement set MPC-BCG (for about 200 times) From September 01, 2018, the standard color protective material has been renewed from glass to safe plastic. There is no change in usage. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test pH anthocyanin ZAK-ANC (10 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Silica (high concentration) No.20C LR-SiO2C (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Paper pH measurement set MPC-BTB (for about 200 times) From September 01, 2018, the standard color protective material has been renewed from glass to safe plastic. There is no change in usage. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Total nitrogen / total phosphorus measurement set (high pressure) TNP-NP2 A set of high-pressure decomposer, reagents, and measuring machine for pretreatment. The high-pressure decomposer uses a small and simple high-pressure cooker instead of the high-pressure steam sterilizer specified in JIS K 0102. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Flow analyzer Ammonium nitrogen FIA-NH4 Compatible with JIS K 0102 factory wastewater test method Compact integrated type (liquid feed pump, reaction constant temperature bath, detector) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test pH-TBL WAK-TBL (50 doses) ● Suitable for measuring water with weak buffering properties. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Aluminum No.24 LR-Al (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Silica (low concentration) No.20D LR-SiO2D (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Divalent iron No.29 LR-Fe2 + (50 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
![]() |
Kyoritsu Institute of Physical and Chemical Research Pack test Palladium WAK-Pd (50 doses) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Flow analyzer Fluorine FIA-F Compatible with JIS K 0102 factory wastewater test method Compact integrated type (liquid feed pump, reaction constant temperature bath, detector) |
![]() |
Kyoritsu Institute of Physical and Chemical Research Reagent set for water quality measurement Iron (low concentration) No.42 LR-FeT-D (30 times) The amount of water measured is 25 mL. Water quality can be measured using a spectrophotometer. As it is packed one by one, it does not require weighing and is convenient to handle. |
Kyoritsu Institute of Physical and Chemical Research Total cyanide (low concentration) Distillation reagent CNT-RA (40 doses) |
|
![]() |
Kyoritsu Institute of Physical and Chemical Research Paper pH measurement set MPC-CR (for about 200 times) From September 01, 2018, the standard color protective material has been renewed from glass to safe plastic. There is no change in usage. |