 |
- DiLOG DLEV1 EVSE Charge Station Adaptor Kit
- Simulate proximity pilot and control pilot states
- Type 1 and type 2 connector compatibility
- 4mm input terminals for single or 3-phase connections
|
 |
|
- Kewtech KEWEVA EV Charge Point Testing Adaptor
- Designed for use in both single and three phase charging equipment, giving accurate results with ease
- The KEWEVA adaptor uses an IEC 62169-2 Type 2 connecter for EC charging units, aswell as utilising red LEDs for status
- Working temperature of 0 - 40°C and a maximum input voltage of 250V (single phase)
|
|
|
- Kewtech KEWEVSE EV Charging Point Adapter
- Enables simple loop, RCD and RDCD testing
- Simulates the presence of an electric vehicle
- Compatible with Kewtech MFTs such as the KT66DL
|
|
|
- Metrel A1532 Electric Vehicle Charging Station Adaptor
- Test EVSE electric vehicle charging points for safety and functionality
- Allows MFT to simulate vehicle attached to charging point in various states
- Compatible with any Metrel MFT, particularly MI3152 Eurotest XC
|
|
|
- Metrel A1532XA Electric Vehicle Charging Station Adaptor
- Test Mode 3 EV supply equipment with type 2 connectors
- 3 phase load testing up to 13A and different error types
- EVSE Auto Sequence support & compatible with MESM software
|
|
|
- Fluke FEV300 EV Charging Station Test Adaptor with Type 2 Connector
- Perform safety testing of charging stations
- Functional testing of charging stations
- Troubleshooting and repair of charging stations
|
|
|
- Megger EVCC300 Electric Vehicle Charger Checker
- Perform EV charger safety & operation checks
- Compatible with mode 2 & single phase mode 3 (level 1 & two-phase level 2) chargers
- Avoid nuisance tripping of RCD/GFCI
|
|
|
- Metrel MI3125BT Eurotest Combo Multifunction Tester
- Small and handheld with 6mA DC test for EVSE testing
- Bluetooth enabled tester compatible with Metrel aMESM Android App and MESM PC software
- Compatible with A1532 for a complete 18th Edition & EV test solution
|
|
|
- DiLOG DL9130EV Multifunction Tester
- Multifunction Tester from DiLOG with complete EVSE testing capabilities
- Auto sensing high current 2 & 3 wire loop test
- Auto EV Test Sequences and Auto Start Loop & Continuity Tests
|
|
|
- Kewtech KT66DL 12-in-1 Multifunction Tester
- Kewtech's ultimate 12 in 1 Multifunction Tester with EV testing capacity
- Enhanced Loop testing capability for 3 & 2 wire low-current tests
- Large colour screen simultaneously displays all auto-tests
|
|
|
- DiLOG DL9130EV Multifunction Tester & EVSE Adaptor Kit
-
- Includes DL9130EV Multifunction Tester & DLEV1 EVSE Adaptor
- Specifically designed for engineers performing EV installations
- Full EV testing sequence for verifying DC protection
|
|
|
- Metrel EVSE Test Standard Kit
- An economical kit that is perfect for testing electric vehicle charging points
- Includes the versatile, Bluetooth-enabled Metrel MI3125BT MFT
- Metrel A1532 simulates a vehicle attached to charging point
|
|
|
- Kewtech KT66EVA Multifunction Tester and EVSE Adaptor Kit
- Kit features the Kewtech KT66DL Multifunction Tester and the Kewtech KEWEVA EV Charge Point Testing Adaptor
- Comprehensive RCD testing including 6mA DC RCD test for EVSE
- KT66DL includes both 2 and 3 wire low current test options of loop testing
|
|
|
- Metrel A 1631 EV Monitoring Cable
- Monitor CP signal communication, Current, Voltage & More
- Type 2 male and female connectors for EVs and EVSE instruments
- Verify EVSE counters by simulating an external load up to 13 A
|
|
|
- Metrel MI3152 EurotestXC Multifunction Tester
- Large, colour touch screen user interface
- Suitable for all scopes of electrical installation testing
- Programmable RCD testing, including 6mA test for EVSE
- Upgradeable and future proof
|
|
|
- Kewtech KT66EV Multifunction Tester & EV Adapter Kit (KT66DL + KEWEVSE) - KT66EV
- 12-in-1 Multifunction tester with compact EV Charing Point Adapter
- Includes Loop testing options for both 3 & 2 wire low-current tests
- Comprehensive RCD testing facility with 6mA DC RCD test for EVSE
|
|
|
- Fluke 1663 Multifunction EVSE Test Kit
- Kit containing Fluke 1663 and FEV300 electric vehicle charging station adaptor
- Auto-testing functions and concurrent measurements
- FEV300 Adapter capable of test EV charging stations with AC charging mode 3
|
|
|
- Megger MFT1741+ EVSE Test Kit
- Kit consists of Megger MFT1741+ & EVCA210-UK Electric Vehicle Charge Point Adaptor
- Performs anti-trip loop testing with confidence meter for assessing loop measurements
- Fully compatible with all single and 3-phase electric vehicle charging points
|
|
|
- Fluke 1664FC Multifunction EVSE Test Kit
- Test kit containing the Fluke 1664FC Multifunction Tester and Fluke FEV300 EV Charging Station Test Adaptor with Type 2 Connector
- Test 6mA RCD-DD tests according to IEC 62955 standards
- Fluke Connect compatible wirelessly connect a smart device or other Fluke connect tools
|
|
|
- Metrel MI3152 EurotestXC EVSE Pro Test Kit
- An advanced kit specifically designed for testing electric vehicle charging points
- Includes the downloadable, Bluetooth-enabled Metrel MI3152 Eurotest XC MFT
- Metrel A1532 Adaptor allows state-by-state testing on charging points
- Upgradeabel and futureproof Multifuncttion Tester
|
|
|
- Fluke 1673FC Multifunction EVSE Test Kit
- Test kit containing the Fluke 1673FC Multifunction Tester and Fluke FEV300 EV Charging Station Test Adaptor with Type 2 Connector
- Test 6mA RCD-DD tests according to IEC 62955 standards
- FEV300 Adapter capable of test EV charging stations with AC charging mode 3
|
|
|
- Megger MFT-X1 EVSE Test Kit
- Megger Kit containing Megger MFT-X1 and EVCA210-UK Electric Vehicle Charge Point Adaptor
- User-upgradeable software allowing for updated future regulations
- Fully compatible with all single and 3-phase electric vehicle charging points
|
|
|
- Fluke FEV350 EV Charging Station Analyser (Type 2 Plug)
- A complete solution for safety and performance testing of AC EV charging stations, with Type 1 or 2 Plug Connectors
- The FEV350 can be bought with TruTest EV Charging software which enhances documentation and analysis to be a simple task
- With a plethora of tests and measurements available, the FEV350 is a must-have tool for industry professionals
|
|
|
- Fluke FEV350 EV Charging Station Analyser (Type 1 and 2 Plug)
- Complete solution for safety and performance testing of AC EV charging stations
- For use with the TruTest software
- Can run a variety of measurements and tests
- Also available with only Type 2 Plug Connector and as part of a Fluke 1664FC kit
|
|
|
- Fluke 1674FC Multifunction EVSE Test Kit
- PE conductor can be tested for possible presence of dangerous voltage against earth
- Perform cable simulation with the PP state rotary switch to simulate current capabilities of charging cables
- Perform vehicle simulation testing various charging states
|
|
|
- Fluke 1664FC + FEV350 Multifunction Tester and EV Analyser Kit
- Fluke 1664FC Multifunction Tester
- Fluke FEV300 EV Charging Test Adaptor with a Type 2 Plug
|
|
|
- Metrel MI3132 EV - Electric Vehicle Tester
- Designed specially for use in electronic vehicle testing supporting the UN ECE R1000 Annex and ISO 6469-3 standards
- Test and measure Insulation form 50-1500V, insulation resistance, DC voltage, TRMS voltage and frequency
- 4.3" LCD colour touch screen and fully programmable Auto Sequences
|
|
Thai Baht Converter
Realtools Asia(ศูนย์รวมเครื่องมือวัดและชุดทดสอบอุตสาหกรรม)
