DK pH / temperature data logger pH-Log3030 (pressure resistant waterproof type)
The pH-Log3030 is a battery-powered, throw-in pH / temperature data logger with a pressure-resistant structure that can be used at depths of 100 m. The number of memories is 2,000,000 / channel, which is huge and supports long-term measurement.
pH: 1 to 14 pH | Temperature: 0 to + 80 ° C | Supports maximum depth of 100 m
DK pH data logger pHTemp2000
The pHTemp2000 is a battery-powered pH / temperature data logger that displays the pH value and temperature being measured on the LCD screen. It has a huge memory capacity of 131,071 / channel and supports long-term measurement.
pH: -2 to 14 pH | Temperature: -40 to + 110 ° C
HortiStick 3 in 1 (pH / EC / temperature)
HortiStick 3 in 1 is a water quality meter that can measure pH / EC / temperature with one unit. It is the most suitable water quality meter for hydroponic cultivation liquid fertilizer nutrient solution management and aquatic plant management in the aquarium.
pH | EC | TDS / FC automatic conversion | Temperature
pH meter pH 56 (waterproof pocket type)
pH 56 is a completely waterproof pocket-type digital pH meter. It has cleared IP 67 and adopts a structure that does not cause problems even if it is put in water, so it can be used in harsh environments exposed to humidity and water. The pH and temperature are displayed on the same screen.
pH: -2.00 to 16.00 | Temperature: -5.0 to 60.0 ° C
pH meter pH 55 (waterproof pocket type)
pH 55 is a completely waterproof pocket-type digital pH meter. It has cleared IP 67 and adopts a structure that does not cause problems even if it is put in water, so it can be used in harsh environments exposed to humidity and water. The pH and temperature are displayed on the same screen.
pH: -2.0 to 16.0 | Temperature: -5.0 to 60.0 ° C
Soil pH meter MW101 kit
The soil pH meter MW101 kit is easy to operate and anyone can measure the pH value of soil. It will be delivered with a soil pH measurement procedure manual.
SensoDirect pH 110 (set) is a state-of-the-art pH electrode with two ceramic diaphragms and high quality glass membrane, which allows the temperature of the test water to be used in the range of -5 to + 80 ° C and ranges from 0 to 14 pH. Can be covered.
pH: 0 to 14 pH | Test water temperature -5 to + 80 ° C
Continuous pH measuring instrument MC110 / MC120
The continuous pH meter MC110 / MC120 is designed to continuously monitor the pH value of an aqueous solution. With MC110 / MC120, the alarm light turns on when the pH value being measured exceeds or falls below the specified pH value. The MC110 / MC120 are pH monitors ideal for hydroponics and aquarium applications.
Water quality meter SensoDirect 150
The SensoDirect series of compact digital water quality meters are multifunctional water quality meters that can be equipped with pH electrodes, conductivity electrodes, ORP electrodes, and DO electrodes in a single device.SensoDirectpH-EC-DO delivers a set of pH, conductivity (TDS), and dissolved oxygen measurement item kits.
Measuring range pH 0 to 14 pH | Temperature 0.0 to 60.0 ° C | Conductivity 0 to 200.0 mS / cm | TDS 0 to 132,000 ppm | Dissolved oxygen 0 to 20.0 mg / l | 1,600 memory
pH meter SD50 (waterproof pocket type)
A compact, easy-to-use, high-precision water quality meter that measures pH and temperature. The completely waterproof structure makes it ideal for use in sites with high water and humidity.
pH measurement range 0 to 14 pH | Temperature measurement range 0 to 60 ° C | Completely waterproof
Residual chlorine / pH / ORP total 6743
Residual Chlorine Residual Chlorine / pH / ORP Total 6734 is a low-priced residual chlorine meter that can measure residual chlorine, pH, ORP, and temperature with one unit.
Measuring range: Residual chlorine 0.1 to 3.5 mg / L, pH -25 to 16 pH, ORP ± 1999 mV
structure that can be used at depths of 100 m. The number of memories is 2,000,000 / channel,
which is huge and supports long-term measurement.