Fukuhara

product category

Drain trap

Product image	Product name Main use	Product Summary	Applicable air compressor
	Single trap air tank drain	When the compressor switch is turned off at the end of work, all drain and air are released. The next morning the compressor starts with a light load!	0.2 ~ 11kW
	Draining the double trap air tank	Drains frequently and reliably during compressor operation, and all drain and air are discharged at the end of work. The next morning the compressor starts with a light load!	2.2 to 37kW
	Draining of auto air trap air tank	Drainage is surely and frequently discharged during compressor operation. The drain discharge time is variable and can be adjusted according to the drain amount.	0.75-37kW
	Drainage of electronic trap air tank	Drainage is surely and frequently discharged during compressor operation. The drain discharge time is variable and can be adjusted according to the drain amount. No distinction between pressure switch type and unloader type	0.4-22kW
	Drain removal of electronic trap II spare tank 2018.4 Model change	The operation is the same as the electronic trap. The drain discharge time and discharge cycle are both variable and can be adjusted according to the drain amount. Can be installed without distinguishing between pressure switch type and unloader type.	0.4 to 37kW
	Drain removal of electronic trap II spare tank with alarm 2018.7 New release	A model with an alarm has appeared in the best-selling product “Electronic Trap II”.	0.4 to 37kW
	Drain the Super Trap Spare Tank	The oil has a viscosity as high as that of heavy oil, and is ideal for discharging drainage with a large amount of sludge inflow. Since there is no strainer, there is almost no accident that prevents discharge due to clogging.	22-220kW
	Drainage of super trap spare tank with alarm 2017.7 New release	We will inform you of the fundamental drainage defects such as “Draining out” and “Draining out”.	22-220kW
	Drain the ultra trap spare tank	For medium and large compressors, the valve opens and closes smoothly, ensuring high reliability, high viscosity, and high scale traps. Since there is no strainer, there is almost no accident that prevents discharge due to clogging.	22-500kW
	DREX150 (Drex 150) Air dryer drain removal	Drain trap ideal for air dryers, aftercoolers and air filters. There is almost no air loss. It is not necessary to set the drain discharge cycle and discharge time. Only drain is discharged when the sensor is detected.	150kW or less (reference value)
	Mug trap air filter drain removal 2017.4 Model change	No power supply required. Snap action using spring repulsion. Reliable and reliable drain discharge at the industry's No. 1 largest outlet.	150kW or less (reference value)
	Super drex 610 energy saving drain trap	It is ideal for discharging drainage with a large amount of sludge inflow, which accumulates in large amounts in medium and large compressor aftercoolers, drain separators, air tanks, dryers, air filters, etc.	150-610kW
	Ultradrex 550 energy-saving drain trap	By removing the drain of a large air compressor, it solves problems such as air release, air loss due to the manual opening of the manual valve, and no drain.	150-550kW
	Thin Ride Rex 600 energy saving drain trap	Drain valves and orifices such as intercoolers, aftercoolers, air tanks, refrigeration air dryers, large air filters, etc. can be opened constantly to reduce power costs.	150-600kW

 

 

High voltage / high voltage drain trap

Product image	product name	Model	Power-supply voltage	Maximum working pressure	Applicable air compressor
	Single trap (high voltage specification)	O-4	AC400V	1.5MPa	Pressure switch type unloader type 0.2 to 11kW
	Double trap (high voltage specification)	TO1-4	AC400V	1.5MPa	Unloader type 2.2 to 37kW
	Auto air trap (high voltage specification)	P1-4	AC400V	1.5MPa	Pressure switch type 0.75 to 11kW
		T1-4	AC400V	1.5MPa	Unloader type 0.75-37kW
	Electronic trap (high voltage specification)	UP155-4	AC400V	1.5MPa	Pressure switch type unloader type 0.4 to 22kW
	Electronic trap II (high voltage specification)	UPII-4C	AC400V	1.5MPa	Pressure switch type unloader type 0.2 to 37kW
	Electronic trap II (High pressure 4.9MPa specification)	UPII-1C-49	AC100V	4.9MPa	Pressure switch type unloader type
		UPII-2C-49	AC200V	4.9MPa
	Super trap (high voltage specification)	SST220G-4 (with sensor)	AC400V	1.0MPa	Pressure switch type unloader type 22 to 220kW
		ST220G-4 ( Without sensor)	AC400V	1.0MPa

 

 

Drain trap for compressor oil

Product image	Product name Main use	Product Summary	Applicable air compressor
	Screw oil trap oil contributes to longer life of compressor and compressor 2017.7 Model change	Only drain (water) accumulated in the oil tank of the screw air compressor is safely and automatically discharged.	2.2 to 150kW
	Oil Clean Hunter Screw Compressor dedicated oil washer 2017.11 Change model	It further improves the quality of the oil and keeps it clean for a long time, contributing to longer life of the compressor and oil.	150kW or less

 

 

"Tornado Centrifugal" steam separator

Product image	product name	Product Summary	Applicable aperture	Maximum working pressure
	Super cyclone separator	The tornado centrifuge cartridge efficiently separates moisture and oil in the compressed air.	Rc3 / 8 ～ Rc3	0.1-1.5MPa

 

 

Air filter

Fukuhara's Air Filter “Compure AIRX Filter”
We provide optimum high-quality Compure Clean Air for each of the diversified uses of compressed air.

Product image	product name	Product Summary	Applicable aperture	Maximum working pressure
	AIRX small filter	Compact and high performance air filter. Separation performance is enhanced by gas-liquid separation material.	Rc1 / 4 to Rc3 / 4	0.1-1MPa
	AIRX filter float type drain trap built-in type	A high-performance filter in which air flows from the inside to the outside and traps foreign matter inside the element, so there is almost no drain trap discharge failure.	Rc3 / 8 to Rc3 / 4	0.1-1.5MPa
	AIRX filter mug trap external type	A high-performance AIRX filter has a reliable drain discharge mug trap that uses magnetic repulsion.	Rc3 / 8 ～ Rc3	0.1-1.5MPa
	Sanitization filter	The first sanitization filter in 1986. Boasting a long track record, sterilization performance is the best in the industry with LRV ≧ 8.	Rc3 / 8 ～ Rc2 1/2	0.1-1.5MPa

 

 

High pressure air filter

Product image	product name	Product Summary	Applicable aperture	Maximum working pressure
	AIRX high pressure filter	Airx filter compatible with high pressure.	Rc3 / 8 ～ Rc2 1/2	0.1 ~ 4.9MPa

 

 

Regulator

Product image	product name	Product Summary	Applicable aperture	Maximum working pressure
	High pressure regulator	Regulator for high pressure.	Rc1 / 2 to Rc1	4.9MPa

 

 

Booster

Creates high-pressure compressed air using compressed air without using electricity. "

Product image	product name	Product Summary
	POWER MAX 2x ratio PX201-4 / PX201S-4	This is a pressure booster that uses high-pressure air of up to 1.6MPa using low-pressure compressed air without using electricity .
	POWER MAX 4x ratio PX402-4 / PX402S-4	A pressure booster that uses high-pressure air at a maximum of 2 MPa by using low-pressure compressed air without using electricity .
	POWER MAX 6x ratio PX60350-4 type	A pressure booster that uses low-pressure compressed air without electricity to produce high-pressure air of up to 3 MPa .

 

 

Air dryer

Even if a compressor-side refrigeration air dryer is installed, if drainage is generated from the end or if you want to lower the dew point temperature, just supply compressed air and the atmospheric dew point temperature is -17 to -65 ° C. Ultra dry compressed air is obtained.

Product image	product name	Product Summary	Working pressure
	Membrane air dryer	A refrigeration air dryer is installed on the compressor side, but there is a problem with drainage from the end. Those who want to lower the dew point temperature more. By simply supplying compressed air, ultra-dry compressed air with a dew point temperature of -17 to -65 ° C can be obtained.	1.5MPa
	Microsoft air dryer	It is fluorocarbon-free and provides dry air similar to a refrigerated air dryer. Equipped with a sterilization filter with LRV ≧ 8 (99.999999%). The bacteria are almost completely removed. No power supply, small size, light weight, dustproof, oil removal	0.8MPa
	LAST air dryer	The pressure dew point temperature of compressed air is set from -17 ℃ to -22 ℃ in order to eliminate troubles caused by drainage of terminal air equipment. Drain oil concentration is reduced to 5ppm or less with the drain treatment equipment equipped as standard.	0.7MPa
	Sanitization air dryer	The compressed air of the compressor contains a lot of moisture, oil, dust, bacteria, mold yeast, ultrafine particles, odor, and so on. This device removes them and provides clean air.	0.97MPa

 

 

Oil mist removal device

For those who have an oil filter, oil mist filter, and activated carbon filter, but are in trouble because of the oil mist.

Product image	product name	Product Summary	Processing flow rate
	Oil buster	A large amount of high-performance oil-absorbing material is filled and flows through a large tank with a small differential pressure and a passing distance of 60 times or more, so that oil mist can be adsorbed and captured efficiently over a long period of time.	2,000-12,000L / min

 

 

Drain treatment device

Fukuhara's drain treatment device “Drain Destroyer”
filter alone and reliably treats drains for a long period of time. Easy to operate and maintain. Many deliveries.

Product image	product name	Product Summary	Applicable air compressor
	PSD type	Developed for the purpose of local processing of small compressors and piping drains, adopting the natural drop method, no power is required, and drains generated from other locations can be manually charged. (Old drain that stays for a long time cannot be processed.)	8kW 15kW 22kW
	PSD8T type	The PSD8 model is equipped with an electromagnetic drain trap. There is no need to purchase a separate drain trap.	8kW
	XSD type	All-in-one type drain treatment machine without specific gravity difference separation tank. All processing steps are done with a single filter, saving time. Best match with current compressor with low oil consumption and draining solenoid valve.	25kW 50kW 75kW
	LSD type screw air compressor only	For the new generation compressors with reduced oil consumption, the drain separation tank and LAB tank filter have been streamlined to improve maintenance and reduce costs. Excellent total performance.	55kW 110kW 165kW
	SD type	This is an overwhelming best-selling series that has established a no-power treatment using the super trap discharge power for the purpose of draining medium-sized compressor rooms and medium- and large-sized compressors.	37kW 75kW 150kW 220kW
	ADP type / ADPL type	This is a universal drain treatment machine that can treat drainage in large-scale compressor chambers in combination with large-capacity drain separation tanks and floating oil production equipment, even for highly concentrated and highly emulsified drains. The customer pit can be used effectively with a built-in pump.	220KW, 440KW 660KW, 880KW 1,100KW
	Drain treatment Related Items	Optional product for ADP / ADPL type. Or it is a product required for pretreatment of drainage.

 

 

Cooler drain oil / water separator

Product image	product name	Product Summary	Applicable cooler
	Cooler drain beautiful water	The oil concentration of the cooler drain mixed with oil mist is treated with 5ppm or less of fresh water, which is the standard value for wastewater in the Water Pollution Control Law.	20-40kW (approximate)

 

 

Oil concentration reduction device

Reduces the load on drain treatment.

Product image	product name	Product Summary
	Floating oil production equipment	This equipment reduces the oil concentration of drain water by attaching and floating ultrafine bubbles on dispersed oil, emulsion water, solids, scum, etc. floating in the drain water of an air compressor.
	Floating oil recovery unit Super Schema	A small motor rotates a lipophilic belt slowly and collects floating oil floating on the liquid level in the tank.
	Oil concentration reduction device	By generating fine bubbles in the drain separation tank and efficiently floating the oil, the floating oil is almost removed.

 

 

Adsorption device for copper, zinc, etc.

Product image	product name	Product Summary	Applicable air compressor
	New release of Metal Buster 2019.5	The above invisible metal substances are adsorbed and processed below the government ordinance standard of the Water Pollution Control Law.	22kW, 75kW 150kW 220kW

 

 

Nitrogen gas generator

Fukuhara's nitrogen gas generator "MAX N 2 nitrogen gas generator"
Nitrogen gas is an era of in-house production using air as a raw material.

Product image	product name	Product Summary	Nitrogen gas purity
	Membrane separation method	Compressed air is sent to the gas separation membrane (hollow fiber membrane), and nitrogen, argon gas, etc. that did not permeate the membrane are taken out as products. The membrane can be used semipermanently when using clean air pressure.	97-99%
	PSA method	A nitrogen generator that uses an adsorbent to efficiently separate oxygen and nitrogen from air and supply up to 99.99% nitrogen.	99-99.99%
	For tire filling	Nitrogen gas provides a higher level of safety and comfort.	97%
	For injection molding machine	Sun spots, burns, yellowing, etc. are solved with nitrogen.
	For laser processing machine assist	High purity 99.999% or higher High pressure (2.5 to 4.5MPa) nitrogen gas enables non-oxidative cutting of stainless steel.
	MAX N 2 booster	By increasing the pressure using the compressed air of the existing air compressor, the low-pressure nitrogen gas is increased up to 3 MPa.
	MAX O 2 oxygen gas generator	Stable supply of high-purity oxygen only when the switch is ON.

 

 

Aroma generator

Product image	product name	Product Summary
	DA type	Delicious air is automatically released every time pneumatic equipment is used. Every time you use an air turbine, you automatically release a refreshing scent.

 

 

Oil absorption waste

Product image	product name	Product Summary
	Oil Q	Factory maintenance product, high performance oil adsorbent. For the treatment and defense of oil leaks, oil spills, oil stains, oil mist, oil-containing wastewater, etc. The mat material is hydrophobic, oleophilic and has a specific gravity of 0.9, so it will not float and sink even if left on the surface for a long time.

 

 

Leak detector

Leak detector "leak alarm"
Who would be able to predict that there may be a drop of leak lead to catastrophe?

Product image	product name	Product Summary
	FL-10DA type	Explosion-proof specification Leak detector for mechanical seals Explosion-proof standard: d2G4
	FLAH-10DA type	Explosion-proof specification Leak detector for mechanical seals Explosion-proof standard: d2G4 Maximum operating temperature 250 ℃
	FL-10 type	Drip-proof specification Mechanical seal dedicated leak detector Maximum operating temperature 80 ℃

 

 

Vacuum chamber

Product image	product name	Product Summary
	Vacuum chamber	Easy to open and close with a handle type lid. Easy to open and close and high performance 3.1 × 10 -3 Pa.

 

 

Air gun

Product image	product name	Product Summary
	Blowgun	Energy-saving product of compressed air. Adjustment gun, sanitization cancer, powerful gun, which cancer do you save and sanitize?

 

 

Pure clean system for dental clinics

This is a dedicated system for dental clinics to provide safe and clean air.

Product image	product name	Product Summary
	Sanitization filter	The first sanitization filter in 1986. Boasting a long track record, sterilization performance is the best in the industry with LRV ≧ 8.
	Sanitization air dryer	The compressed air of the compressor contains a lot of moisture, oil, dust, bacteria, mold yeast, ultrafine particles, odor, and so on. This device removes them and provides clean air.
	Single trap air tank drain	When the compressor switch is turned off at the end of work, all drain and air are released. The next morning the compressor starts with a light load!
	Draining of auto air trap air tank	Drainage is surely and frequently discharged during compressor operation. The drain discharge time is variable and can be adjusted according to the drain amount.
	DA type	Delicious air is automatically released every time pneumatic equipment is used. Every time you use an air turbine, you automatically release a refreshing scent.
	Drain cleaner	With a drain cleaner with a filtration filter and oil absorbing material. Clean and drain the drain. Trap discharge noise is also reduced.