Shahe รุ่นSL-140เครื่องวัดและทดสอบความแข็งของโลหะPortable Rebound Leeb Pen-type Hardness Tester Gauge for Metal Steel

1.Installed mechanical or permanent assembly parts.

2.Heavy work piece.

3.Invalidation analysis of pressure vessel, steam turbine generator set and its equipment.

4.Test space is very narrow artifacts

5.Bearings and other parts.

6.Requires a formal original record of the test results.

7.Material distinction of metal materials.

8.Rapid test of multiple measurement sites in large scale workpiece.

9.Working temperature: －10℃～＋55℃;

10.Storage temperature: －20℃～＋75℃;

11.The relative humidity is less than 90%;

12.There is no vibration, no strong magnetic field, no corrosive medium and serious dust in the surrounding environment.

13.Based on the principle of measuring the Leeb hardness, it can be measured in a variety of metal materials.

14.Easily switch to the hardness of all formats (HL、HB、HRB、HRC、HRA、HV、HS), parallel conversion of the measured value of the hardness

15.Using the big screen 128 x 64 graphics dot matrix LCD display, information is rich, intuitive.

16.With bright backlight display, easy to use in the light gray environment.

17.A host can be equipped with 7 kinds of different impact device, automatic identification of impact device type. No need to re calibrate the replacement.