TPI รุ่น TPI-9071 เครื่องวิเคราะห์การสั่นสะเทือน,Smart vibration meter with remote probe

TPI รุ่น TPI-9071 เครื่องวิเคราะห์การสั่นสะเทือน,Smart vibration meter with remote probe
รหัสสินค้า SKU-07639
หมวดหมู่ เครื่องทดสอบและอุปกรณ์ตรวจสอบ(Test and Inspection Equipment)
ราคาปกติ 51,500.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 12 มิ.ย. 2564
อัพเดทล่าสุด 8 ส.ค. 2567
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
• Built-in ISO Alarms
• Find machine faults before they stop your machine
• Increase productivity and lower maintenance costs
• Full Color LED Display
• Collect data
• Standard Cable mounted accelerometer with magnet
• ISO built-in Alarms
• Easily identify bearing problems with BDU Reading
• Easily identify problems with built-in band filters:
1X (unbalance)
2X (misalignment)
3X (looseness)
• 800 line FFT (spectrum)
• Ruggedized IP67 case
Model number TPI-9071
Accelerometer IEPE type sensor
Sensor sensitivity About 100 mV / g
Frequency range Speed (ISO) 2Hz to 1kHz (<600 PRM)
10Hz to 10kHz (≧ 600 RPM)
Acceleration (Total g) 10Hz-10kHz
Bearing Deterioration (BDU) 1kHz to 10kHz
Maximum frequency resolution 1.25 Hz (when FFT 800 line is set)
Vibration unit acceleration g (RMS)
speed mm / s or inch / s (RMS)
Bearing deterioration BDU (1g RMS = 100 BDU)
Speed accuracy ± 5%
Frequency unit Hz, RPM, CPM
Input range ± 60g
Dynamic range 72 dB (resolution 0.05 g)
VA diagnostic band
RPM: Rotation speed
Unbalance 1 x RPM
Misalignment 2 x RPM
Looseness 3 x RPM
Storage capacity 200 data (10 blocks in total: 20 items are saved in each block)
Power supply 2 AA lithium batteries (recommended by Energizer)
Automatic power off function The power turns off automatically without button operation for a certain period of time.
Can be set from 1 to 60 minutes
Battery life Normal use Approximately 50 hours (uses automatic power off function, depends on brightness setting)
usage environment 0-50 ° C
Storage environment 0-70 ° C
Size Body: H200 x W60 x D26 mm, probe cable length: approx. 80 cm to 200 cm
weight Body: Approximately 250 g (including batteries), Probe: Approximately 270 g (Sensor unit: Approximately 210 g, Cable: Approximately 60 g)
Protection class IP67 (Rubber packing is in the correct position and the battery cover is securely sealed)
accessories Instruction manual
Test battery (set in the main body)
IEPE type accelerometer A9014 + curl cable A9013, magnet base A9073
Nylon protective case

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10263]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [93]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [240]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม