Ono Sokki รุ่นGE-1400เครื่องวัดความเร็วรอบเครื่องยนต์ดีเซลHandy Diesel Engine Tachometer GE-1400

Ono Sokki รุ่นGE-1400เครื่องวัดความเร็วรอบเครื่องยนต์ดีเซลHandy Diesel Engine Tachometer GE-1400
รหัสสินค้า SKU-07546
หมวดหมู่ เครื่องทดสอบและอุปกรณ์ตรวจสอบ(Test and Inspection Equipment)
ราคาปกติ 25,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 11 มิ.ย. 2564
อัพเดทล่าสุด 11 มิ.ย. 2564
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
A handy type digital tachometer designed exclusively for 4-cycle diesel engines.
Just by attaching the CP-044 detector (sold separately) to one of the fuel injection pipes with one touch,
r / min direct reading engine speed measurement is possible.
■ With trigger adjustment function
■ Equipped with analog output, pulse output, monitor output
■ 20 data memories
Ono Sokki GE-1400 Handy Diesel Engine Tachometer Specifications

GE-1400 Handy Diesel Engine Tachometer

Adaptive engine 4-cycle diesel engine
Detection method Detects the pulsation of the injection pipe that occurs during fuel injection
Corresponding detector CP-044 (optional)
Calculation method Periodic calculation method
Measurement time 1s + input signal within 1 cycle time
Display Liquid crystal display, 5 digits, with backlight (character height: 10.2 mm)
Display update time

1 ± 0.2s

Unit of measurement r / min, r / s
Measurement range 400 to 8000 r / min (r / s is the range of r / min measured divided by 60)
Measurement accuracy Display value * × (± 0.02%) ± 1 count
(* Display value is the count value excluding the decimal point)
Memory function 20 data (MAX)
Overrange function Overrange (ERROR mark) display when the measured value exceeds the display range
Rotation upper limit warning function When the rotation speed exceeds the preset upper limit value, the upper limit warning (↑ mark) is displayed.
Trigger level adjustment function Adjust with the rotary volume on the right side of the main body
Analog output Output for rotation speed display value

Output voltage: 0 to 1 V / 0 to full scale (full scale is optional)
Conversion method: 10 bit D / A conversion method
Linearity: ± 1% / full scale
Output update time: 50 ms + 1 cycle time or less
Temperature stability: ± 0.05% / full scale / ℃ (span & zero)
Setting error: ± 0.5% / full scale
load resistance: 100 kΩ or more

Monitor output Analog output for monitoring after waveform shaping of sensor signal
(using switching with the above rotation speed analog output)
Load resistance: 100 kΩ or more
Pulse output 1 pulse output for each signal detection

Output voltage: Hi + 4.5V or more, Lo + 0.5V or less
Output logic: Positive logic
Load resistance: 100 kΩ or more

Operating temperature limit 0 to + 40 ° C
Storage temperature range -10 ℃ ~ + 50 ℃
Power supply AAA batteries (1.5V) x 4 or dedicated AC adapter PB-7090 (optional)
Battery life 16 hours or more (when the backlight is off), 8 hours or more (when the backlight is on)
Battery warning display A warning mark (LOW mark) is displayed when the battery voltage drops below approximately 4.4 V.
External dimensions 180.5 (L) x 66 (W) x 47.5 (D) mm (main unit only)
Quality Approximately 280g (main unit only / excluding batteries)
accessories AAA batteries x 4, carrying case, AX-501 output cable
option ・ CP-044 detector
・ PB-7090 AC adapter
・ AX-501 Output cable with BNC connector (2m, analog / pulse output combined)

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10259]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [92]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [240]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม