RIKEN KEIKI รุ่นGW-3 (CO)เครื่องวัดก๊าซแบบพกพาWearable Portable Gas Monitor GW-3 (CO)

RIKEN KEIKI รุ่นGW-3 (CO)เครื่องวัดก๊าซแบบพกพาWearable Portable Gas Monitor GW-3 (CO)
รหัสสินค้า SKU-06990
หมวดหมู่ เครื่องวัดและตรวจจับก๊าซ(Gas measurement l Gas detector)
ราคาปกติ 20,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 2 มิ.ย. 2564
อัพเดทล่าสุด 2 มิ.ย. 2564
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
The world's smallest and lightest class single component / 2 component portable gas monitor.
The compact and lightweight design weighs only 45g, so it can be worn anywhere, such as on your wrist, arm, or your helmet band.
In addition to buzzers and lamps, vibration alerts you with gas alarms.
By wearing it on your wrist or arm, you can quickly notice the danger due to vibration even in the noise.
・ JIS T 8201: 2010 Oxygen deficiency measurement oxygen meter compliant (GW-3 (O2))
・ JIS T 8205: 2018 Hydrogen sulfide meter compliant (GW-3 (HS))
RIKEN KEIKI Wearable Portable Gas Monitor GW-3 Series Specifications


Common specifications

Sampling method Diffusion type
alarm Gas alarm: 3-stage alarm, STEL alarm, integration or TWA alarm (* 1), over alarm Failure alarm: Sensor connection / disconnection, battery voltage drop, calibration failure, clock error, system error
Alarm return operation Automatic recovery or self-holding (* 2)
Alarm operation Lamp blinking, buzzer intermittent ringing, gas concentration value blinking, vibration
Buzzer volume 80 dB or more (30 cm)
Power supply (* 3) Coin-type lithium battery CR2450
Explosion-proof structure Intrinsically Safe Explosion Proof Structure
Explosion Proof Structure Electrical Machinery Equipment Type Certification: Ex ia ⅡC T4 Ga
ATEX: Ⅱ 1G Ex ia ⅡC T4 Ga / IECEx: Ex ia ⅡC T4 Ga / INMETRO: Ex ia ⅡC T4 Ga
Various certifications Explosion-proof structure Electrical machinery / equipment type verification, ATEX, IECEx, INMETRO
Protection class Equivalent to IP66 / 68 (2m, 1h)
External dimensions / mass Approximately 63 (W) x 42 (H) x 22 (D) mm (excluding protrusions) / Approximately 45 g
function Data logger, vibration, STEL alarm, integration or TWA alarm (* 1), one-touch calibration, peak value display, temperature display

Specifications by model

Model GW-3 (O2) GW-3 (OX) GW-3 (HS) GW-3 (CO) GW-3 (C-) GW-3 (CX)
Gas to be detected oxygen oxygen Hydrogen sulfide Carbon monoxide Carbon monoxide (reduces hydrogen interference) oxygen
Detection principle Septal galvanic cell type Constant potential electrolysis type
Detection range
(display range)
0.0-25.0%
(0.0-40.0%)
0.0-25.0%
(0.0-40.0%)
0.0-30.0ppm
(0.0-200.0ppm)
0-500ppm
(0-2000ppm)
0-500ppm
(0-2000ppm)
0.0-25.0%
(0.0-40.0%)
resolution 0.1% 0.1% 0.1ppm (0.0-30.0ppm) 1.0ppm (30.0-200.0ppm) 1ppm (0-300ppm) 10ppm (300-2000ppm) 1ppm (0-300ppm) 10ppm (300-2000ppm) 0.1%
Alarm set value L 18.0%
LL 18.0%
H 25.0%
L 18.0%
LL 18.0%
H 25.0%
1st 1ppm 2nd 10ppm 3rd 10ppm TWA 1ppm STEL 5ppm 1st 50ppm 2nd 150ppm 3rd 150ppm Integrated 150ppm STEL 200ppm 1st 50ppm 2nd 150ppm 3rd 150ppm Integrated 150ppm STEL 200ppm L 18.0%
LL 18.0%
H 25.0%
Response time T90
(* 4)
Within 20 seconds
(Typical: 9 seconds)
Within 30 seconds
(Typical: 8 seconds)
Within 30 seconds
(Typical: 18 seconds)
Within 30 seconds
(Typical: 6 seconds)
Within 30 seconds
(Typical: 17 seconds)
Within 30 seconds
(Typical: 15 seconds)
Operating temperature limit -20 to + 50 ° C
(no sudden change)
-20 to + 60 ° C (no sudden change) * 5
Operating humidity range 10-90% RH
(no condensation)
0-95% RH (no condensation) * 6
JIS compliant standard JIS T 8201:
2010
* 7 JIS T 8205:
2018
-
Continuous use time About 4000 hours About 2000 hours About 4000 hours About 4000 hours About 2500 hours About 2000 hours
accessories

・ Coin-type lithium battery CR2450: 1
・ Watch belt: 1
Belt clip: 1

・ Coin-type lithium battery CR2450: 1
・ Heat-resistant case: 1 (If installed, it does not meet the explosion-proof requirements.)

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10259]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [92]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [240]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม