FUSO รุ่นFU-8Fเครื่องสัญญาณเตือนก๊าซ Stationary Freon gas alarm FU-8F

FUSO รุ่นFU-8Fเครื่องสัญญาณเตือนก๊าซ Stationary Freon gas alarm FU-8F
รหัสสินค้า SKU-06920
หมวดหมู่ เครื่องวัดและตรวจจับก๊าซ(Gas measurement l Gas detector)
ราคาปกติ 23,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 31 พ.ค. 2564
อัพเดทล่าสุด 31 พ.ค. 2564
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
■ For measures against leaks in living spaces and cylinder storage!
■ Semiconductor sensor: Highly sensitive to old and new refrigerants
■ Diffusion type: Responds to the concentration at the installation location
■ Contact output: Can be linked with external devices such as alarms and ventilation fans.
Specifications of stationary Freon gas alarm FU-8F

Product name / model Freon gas alarm / FU-8F
Sensor Semiconductor CFC sensor
Gas to be detected R410A or R22 (specify either)
Alarm concentration
(detectable concentration)
1000ppm-4000ppm (factory default)
and
1/2 RCL or less (RCL = Refrigerant limit concentration in closed space) Japan Racing Association Guidelines JRA GL-13 Standard
Call delay
(responsiveness)
Within 30 seconds with 1.6 times the gas of 1/2 RCL
Alarm sound Intermittent electronic sound Measured 70dB 1m away
External output terminal c contact x 1, a contact x 1 (AC250V DC30V 1A, but resistive load)
Abnormal alarm
buzzer stop function
The alarm buzzer in case of abnormality is stopped by pressing and holding RESET-SW.
Initial ringing prevention No alarm is issued for 3 minutes at the beginning of energization.
Power supply voltage AC100V (± 10%) 50 / 60Hz Power consumption 6W or less
Operating temperature and humidity range Temperature: -10 ° C to 50 ° C Humidity: 80% RH or less (no condensation)
Storage temperature / humidity range Temperature: 0 ° C-40 ° C Humidity: 80% RH or less (no condensation)
Body outer dimensions / mass Body: W116 x H120 x D36.5mm / approx. 240g
Standard accessories Instruction manual (with warranty), construction manual
installation method Attached to a switch box for 2 ports (see construction manual)
The design and specifications of the product are subject to change without notice.

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10259]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [92]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [240]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม