Hioki Electric รุ่นFT4300เครื่องวัดและทดสอบระบบโซล่าเซลIV Curve Tracer FT4300 [HIOKI]

Hioki Electric รุ่นFT4300เครื่องวัดและทดสอบระบบโซล่าเซลIV Curve Tracer FT4300 [HIOKI]
Hioki Electric รุ่นFT4300เครื่องวัดและทดสอบระบบโซล่าเซลIV Curve Tracer FT4300 [HIOKI]Hioki Electric รุ่นFT4300เครื่องวัดและทดสอบระบบโซล่าเซลIV Curve Tracer FT4300 [HIOKI]
รหัสสินค้า SKU-06753
หมวดหมู่ เครื่องมือวัดด้านสิ่งแวดล้อม(Environmental Measuring Instrument)
ราคาปกติ 140,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 28 พ.ค. 2564
อัพเดทล่าสุด 29 พ.ค. 2564
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
Continuous tracing of IV curve in 1 second
Continuous measurement without worrying about heat generation, greatly shortening work time
● Automatic measurement starts when generated voltage is detected
● 200 points are measured per string in 1 second, and data is stored on the tablet Wireless transmission
● Save data on the tablet side, display the IV curve on the tablet
● Measure the amount of solar radiation and PV panel temperature with a wireless voltage / thermocouple logger (sold separately), perform correction calculation in real time on the tablet side

Features of IV Curve Tracer FT4300 [HIOKI]

1 second continuous trace IV curve tracer FT4300

The IV curve tracer FT4300 realizes IV measurement of solar cells in 1 second for each string.
An abnormal string is automatically determined from the curve tracer waveform sent to the tablet.


Wirelessly send measurement results to your tablet



Since the measurement results are displayed on the tablet, each characteristic graph can be checked in detail.
In addition, reading is smooth because the main body of the measuring instrument and the display are separated.

 

 

 

Wireless transmission of solar radiation and panel temperature, real-time correction calculation

Wirelessly send data to your tablet.
Since the data is also saved inside the logger, the data is acquired after measurement and correction calculation is performed even within the range where radio waves do not reach.







Measurement starts with voltage detection, multi-point measurement work is smooth

When the generated voltage is detected, the measurement starts automatically.
Since there is no need to press the measurement start button, multi-point measurement is smooth.
Measure continuously in 1 second at one location without worrying about heat generation.
It measures 200 points per string in 1 second and even displays the curve.
There is little heat generation in the measuring instrument body, and continuous measurement is possible without a cooling period.





Automatically numbering and saving measurement data, smooth inquiry of measurement location and measurement data

The box (connector box) No. and string No. are automatically labeled for the measurement data and the data is recorded.



Replacing existing data with remeasured data is easy with tablet operation

You can replace the data by specifying the box number and string number to be remeasured and performing the measurement.



Up to 20 strings overwritten display, comparison can be confirmed

You can compare the measurement results of each string.
Therefore, it is possible to easily find an abnormal string.






Assists in determining abnormalities and can send data by email

The color display and warning mark support the judgment of abnormalities.
If the communication environment is in place, it is possible to extract only the abnormal data and send it to the office by e-mail.

 



Manage measurement data by importing to a PC via USB connection

The measured data can be imported to a PC and the IV curve and measurement value list can be displayed.
(Free PC software download and Excel software are required to display the data.)

Create a report quickly and easily with the data captured on your PC

You can create a form with a list of IV curves and measurements. You can reduce the time to create a report because you can easily create it just by importing the data.

The probe can be used with the lid closed, making work smoothe

Specifications of IV curve tracer FT4300 [HIOKI]

Measurement method High-speed electronic load control
Display graph IV curve, PV curve
Measurement compatible panel Single crystal, polycrystal, compound system
Number of sampling points 200 points
Measurement time 1.0 s or less (including drawing, remeasurement operation, excluding STC correction)
Maximum input current (A) / voltage (V) / power (W) DC 10 A / DC 1000 V / DC 8000 W
DC voltage DC 0.0 V to DC 1000.0 V (display range 1050.0 V)
DC current DC 0.00 A to DC 10.00 A (display range 12.00 A)
Maximum output (Pm) 5 W-8000 W
Maximum output operating voltage (Vpm)
Maximum output operating current (Ipm)
Curve factor (FF) 0.00-1.00
Pyranometer input (W / m ^ 2) 50.0-2000 W / m ^ 2
Thermometer input (thermocouple) -40 ℃ ~ + 120 ℃
STC conversion Correction operation based on JIS C 8914 (IEC60891)
DC voltage measurement accuracy ± 0.2% rdg. ± 3.0 V, resolution: 0.1 V
DC current measurement accuracy ± 1.0% rdg. ± 0.30 A, resolution: 0.01 A
Communication interface Bluetooth® 2.1 + EDR (compatible with SPP), supported OS: Android 4.3 or later
Power supply AA alkaline batteries (LR6) x 6 or AA nickel metal hydride rechargeable batteries x 6, operating time: 25 hours
Dimensions / mass 260W x 250H x 120D mm, 1.9 kg
accessories Test pin L4932 x 1, Connection cable L4942 x 1, AA alkaline battery (LR6) x 6, Instruction manual x 1, (Note: Tablet is not included)

IV curve tracer FT4300 [HIOKI] optional item

Test lead

Connection cable L4942 Test pin L4932
Connection cable L4942 Test pin L4932
2.0 m, with protector Attached to the tip of the banana plug cable,
CAT IV 600V, CAT III 1000V

Insolation / temperature measurement

Wireless voltage / thermocouple logger LR8515 Solar sensor Z2004 T thermocouple 9811
Wireless voltage / thermocouple logger LR8515 Solar sensor Z2004 T thermocouple 9811
・ Voltage (± 50mV to ± 50V range) / thermocouple 2ch recording
・ 0.1 second interval ~ ・ Wireless data collection to tablet or PC
・ 500,000 data / ch ・ Dry cell, AC adapter, external power supply drive
Sensitivity constant: Approximately 50 μV / W ・ m-2,
Mountable module thickness: 20 mm to 55 mm
Tolerance class 2, length 5 m,
wire diameter φ 0.32 mm, 5 pieces / 1 set

Other

Carrying case C0203 Nickel Metal Hydride Battery Z0101 Charger Z0102
Carrying case C0203 2500mAh, set of 4 Z0101 Charging only

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10217]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [93]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [241]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม