MK Scientific รุ่นGasman-H2เครื่องวัดแก๊สไฮโดรเจนHydrogenGas H2 แบบพกพามีฟังชั่นบันทึกในตัวGas Leak Detector Gasman-H2 "Hydrogen"(built-in data logger function)

MK Scientific รุ่นGasman-H2เครื่องวัดแก๊สไฮโดรเจนHydrogenGas H2 แบบพกพามีฟังชั่นบันทึกในตัวGas Leak Detector Gasman-H2 "Hydrogen"(built-in data logger function)
รหัสสินค้า SKU-06636
หมวดหมู่ •เครื่องวัดตรวจจับก๊าซเดี่ยวชนิดพกพา(Single Portable Gas Detector)
ราคาปกติ 45,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
สภาพ สินค้าใหม่
ลงสินค้า 14 เม.ย. 2564
อัพเดทล่าสุด 4 มี.ค. 2566
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
H2 : 0-2000 ppm H2 : 0-100% LEL
An ultra-compact compact type hydrogen leak detector that can easily detect hydrogen gas.

specification

Model Gasman-H2
Detection range  0-2000 ppm (hydrogen) or
 0-100% LEL
resolution  1 ppm or
 1% LEL
 sensor  Electrochemical
Sensor life  About 2 years
usage environment  Temperature: -20 to + 55 ° C
 Humidity: 0-99%
Size / weight  90 (h) x 48 (w) x 24 (d) mm
 About 80g
function  Specified concentration alarm 2 points
 Automatic zero calibration, peak display
 Battery consumption display alarm, etc.
Alarm reproducibility  ± 2% FDS (6 months)
Batteries used  Lithium battery CR 2477 or
 Rechargeable lithium battery
Battery life  7-12 months (lithium battery CR 2477)
Explosion-proof structure  Europe:
 ATEX II 1G EEx ia IIC T4 
 (Tamb -20 ~ + 65 ℃) Oxygen / poisonous gas
 ATEX II 2G EEx iad IIC T4 
 (Tamb -20 ~ + 65 ℃) Combustible gas
 USA / Canada:
 Class 1 Groups A, B, C, D Division 1

Features

  • Various flammable gases can be measured in ppm order
  • With the detection gas type switching function, 25 types of flammable gas can be detected by one unit.
  • Supports long-distance suction with pump booster function
    (suction flow rate: 0.3L / min⇒0.6L / min)
  • Automatically switches between two types (Low / High) range display according to the measured value
  • A cartridge type filter (sold separately) can be attached to the standard probe (filter type: for removing hydrogen sulfide, for removing silicon, etc.)

Gas to be detected

No. List of gas species display Lower explosive limit LEL Replacement from methane Replacement from isobutane
1 methane CH4 5.0vol% ×
2 Isobutane i-C4H10 1.8vol%
3 hydrogen H2 4.0vol%
Four methanol CH3OH 5.5vol%
Five acetylene C2H2 1.5vol%
6 ethylene C2H4 2.7vol%
7 Ethane C2H6 3.0vol% ×
8 ethanol C2H5OH 3.3vol%
9 propylene C3H6 2.0vol%
Ten acetone C3H6O 2.15vol%
11 propane C3H8 2.0vol% ×
12 butadiene C4H6 1.1vol%
13 Cyclopentane C5H10 1.4vol%
14 benzene C6H6 1.2vol%
15 n-hexane n-C6H14 1.2vol%
16 toluene C7H8 1.2vol%
17 Heptane n-C7H16 1.1vol%
18 Xylene C8H10 1.0vol%
19 Ethyl acetate EtAc 2.1vol%
20 IPA IPA 2.0vol%
twenty one MEK MEK 1.8vol%
twenty two Methyl methacrylate MMA 1.7vol%
twenty three Dimethyl ether DME 3.0vol%
twenty four Methyl isobutyl ketone MIBK 1.2vol%
twenty five Tetrahydrofuran THF 2.0vol%

component

Body, hand strap Alkaline batteries (4), with drain trap, sampling probe

specification

Model NC-1000
type Single component gas detector
Gas to be detected Flammable gas
Detection principle New ceramic type
Detection range 0 to 10000ppm (auto range switching type)
Low range: 0-1000ppm
High range: 0 to 10000ppm
Gas alarm set value 1st: 250ppm 2nd: 500ppm
Detection method Pump suction type
Types of alarms Gas alarm / failure alarm
Alarm operation Flashing lamp / buzzer / content display
Explosion proof Intrinsically safe explosion-proof structure
Protection class IP67 equivalent
Various certifications TIIS ATEX CE
Power supply AA alkaline batteries x 4
Continuous use time HC specifications: Approximately 20 hours CH4 specifications: Approximately 15 hours
(25 ° C, no alarm, no lighting, pump low mode)
External dimensions / mass Approximately 80.1 (W) x 124 (H) x 36 (D) mm (excluding protrusions)
Approximately 260g (excluding batteries)
Operating temperature and humidity range -20 to + 50 ° C 95% RH or less (no condensation)

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10259]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [92]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [240]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม