Kikusui รหัส TOS9300 เครื่องทดสอบแรงดันไฟฟ้ากระแสสลับและวัดความต้านทานฉนวน,AC HiPot Tester with Insulation Resistance Test,AC output range:0.050kV~5.000kV

Kikusui รหัส TOS9300 เครื่องทดสอบแรงดันไฟฟ้ากระแสสลับและวัดความต้านทานฉนวน,AC HiPot Tester with Insulation Resistance Test,AC output range:0.050kV~5.000kV
รหัสสินค้า SKU-23835
หมวดหมู่ TOS9300 Series Electrical Safety Multi-Analyser,Kikusui
ราคาปกติ 220,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 23 ต.ค. 2568
อัพเดทล่าสุด 23 ต.ค. 2568
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
 
  • The TOS9300 series is a high performance electrical safety analyzer that complies to a wide range of universal standards. Hipot, Insulation Resistance, Ground Bond, Leakage Current (touch current and protective conductor current) and partial discharge can all be tested. A total of 6 models are available for standard compliance tests in a wide variety of applications including R&D, quality assurance manufacturing lines and laboratory tests.

  • User-friendly 10Key configuration
  • Easy firmware updates via USB
  • LAN/USB/RS232C Standard Digital Interface
  • I/V Monitor Terminal (Analog Monitor)
  • STATUS OUT Connector
  • SIGNAL I/O Connector
  • High Precision/High Resolution/High Speed
  • Programmable detection response speed
  • 7.2kV/100W DC HiPot Test
  • Positive Electrode/Negative Electrode Insulation Resistance Testing
  • Electric Discharge Function
  • AC/DC Earth Continuity testing up to 40A
  • EARTH FAULT Protection
  • Offset Cancel
  • Basic memory function
  • Calibration deadline notification
  • High-voltage scanner (option)

AC output section

TOS9300

TOS9301

TOS9301PD

TOS9302

TOS9303

TOS9303LC

AC output section

Output range

 

0.050 kV to 5.000 kV

Resolution

1 V

Setting accuracy

±(1.2 % of setting + 0.02 kV) (at no load)

Max. rated load *1

500 VA(5 kV / 100 mA)

Max. rated current

100 mA (when the output voltage is 0.2 kV or higher)

Transformer rating

500 VA

Output voltage waveform *2

 

Sine

Distortion

2 % or less. (when the output voltage is 0.5 kV or higher and no load or a pure resistive load is connected)

Crest factor

√2 ± 3 % (0.8 kV or higher)

Frequency

 

50 Hz / 60 Hz

Accuracy

±0.1 %

Voltage regulation

±3 % or less (when changing from maximum rated load to no load)

Short-circuit current

200 mA or more (output voltage 0.5 kV or higher)

Output method

PWM switching

Start voltage

 

The voltage at the start of the test can be set.

Setting range

1 % to 99 % of the test voltage

Resolution

1%

Output voltage monitor function

If the output voltage exceeds ±(10 % of setting + 0.05 kV), the output is turned off, and the protection function is activated.

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10217]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [93]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [241]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม