รหัสสินค้า | SKU-22562 |
หมวดหมู่ | •เครื่องตรวจจับก๊าซไอเสียเผาไหม้(Combustible Gas Detector) |
ราคาปกติ | |
ลดเหลือ | 0.00 บาท |
สถานะสินค้า | Pre-Order |
ลงสินค้า | 29 ก.ย. 2567 |
อัพเดทล่าสุด | 29 ก.ย. 2567 |
คงเหลือ | 1 ชิ้น |
จำนวน | ชิ้น |
![]() |
The successor model to the XP-3140. Ideal for checking the amount of gas remaining in a tank and for checking gas replacement work.
Measures flammable gases using an automatic suction system and issues warnings with a buzzer and lamp.
Equipped with Bluetooth, it can be linked to a dedicated app for smartphones and tablets.
Model |
XP-3340II |
Target gas |
Flammable and inert gases |
Gas Sampling Method |
Automatic suction type |
Detection principle |
Gas heat conduction type |
Detection range |
0 to 100 vol% |
Indication accuracy*1 |
±5%FS |
Display resolution |
0.1vol% |
Alarm Setpoint |
50vol% |
Gas alarm method |
Buzzer sounds, alarm lamp (red) flashes, and LCD flashes |
Error notification method |
Buzzer sounds, alarm lamp (yellow) flashes, and LCD flashes |
Power source used |
4 AA alkaline batteries or |
Operating temperature and humidity range |
-20 to 50°C, 95% RH or less (However, there should be no condensation or sudden changes in temperature or humidity) |
Operating pressure range |
Atmospheric pressure (800-1100hPa) |
Explosion-proof construction |
Intrinsically safe explosion-proof construction (flammable gas sensor part is pressure-resistant explosion-proof construction) |
Protection rating |
IP67 equivalent |
Continuous use time*2 |
Approx. 100 hours |
Key Features |
Self-diagnosis (sensor abnormality), zero adjustment, battery level display, illumination lamp function, peak hold function, LCD backlight, buzzer stop when gas alarm occurs, time, alarm test, buzzer volume setting, buzzer mute, data logging |
size |
Approx. W91 x H164 x D44mm (excluding protrusions) |
mass |
Approx. 460g (including batteries) |
Standard accessories |
1m gas inlet pipe or 1m gas inlet pipe (solvent specification), shoulder belt, drain filter, filter element, alkaline dry battery (or nickel-hydrogen rechargeable battery), LCD protective film |
option |
Leather case, alligator clip, gas introduction tube (1, 2, 3, 5, 10m), log data collection software, bump tester, charger, attachment, LCD protective film |
*The sensor is also sensitive to gases other than the target gases. If you are using the sensor in an environment where gases other than the target gases coexist, please check the usage environment and contact us.