Dillon รุ่น AWT05-506447 Radio/Communicator II with Backlight for EDXtreme RED Dynamometers

The Communicator II is an optional hand-held remote that can define the function and manage the operation of one or more EDXtreme dynamometers using wired or radio technologies. Through the programmable SOFTKEY interface, one or more Communicators can monitor multiple dynamometers within the same airspace. In multiple-link lifting arrays, the Communicator can display readings at any or all lift points and calculate the total load.

• Stand-alone EDx for direct measurement applications.
• Single network with one EDx radio dynamometer and Communicator.
• Single network with multiple EDx dynamometers and one Communicator. The Communicator monitors the load at each scale, plus the total weight.
• Single network with two, three or four Communicators.
• Multiple networks with multiple EDx dynamometers and Communicators.

• Communicator II Specifications
  • Enclosure: Designed to NEMA 3 / IP54 with optional sleeve. Suitable for protected outdoor use.
  • Instrument Size: 9.5 x 5.0 x 2.5 inch (241 x 127 x 64 mm).
  • Accuracy: Not applicable. Only sends and receives digital information.
  • Display: 128 x 64 dot-graphic LCD display can show full readings up to 5 instruments.
  • Battery Life: Up to 80 hours continuous radio using (4) AA alkaline batteries.
  • Operating Temperature: -4° F to 158° F (-20° to 70° C).
  • Connectors: Sealed connectors may be used for serial communications and wired connection to an EDXtreme dynamometer.
  • RS-232 Communication: Print or extract data easily. Continuous output can drive a scoreboard. Configurable poll character.
  • Optional audible alarm: Alarm sounds (105dB) when pre-defined load limit has been exceeded.
  • Approval: CE

• Radio Specifications
  • FCC Certified: For unlicensed low power devices. No radio licensing or permits required for normal operation.* (In the US and Canada. Check local ordinances in other countries.).
  • Frequency: ISM 2.4 GHz frequency band operates between 2.4 to 2.4835 GHz.
  • Output Level: 10 mW (10 dBm).
  • Display Update Rate: 1 time per second.
  • Number of Links Remote Can Control: Up to 15 addresses.
  • Configuration Address: Automatic and configurable.
  • Antenna: Integral antenna.
  • Range: Open-air range up to 600 feet, line-of-sight. Indoor range dependent upon environment with 300 feet common. Low power radio systems are dependent upon interference levels from other radio systems and environmental conditions. Radio devices are not suitable for all applications. 

• Configuration Options

A basic stand-alone model can be easily upgraded “in-the-field” to accommodate changing needs. Remote configuration, data acquisition, an audible alarm and single point monitoring of multiple links are all possible with the hardwired or radio communication options available with the EDXtreme. An RS-232 interface is standard on both the EDXtreme and Communicator for connection to a host PC.