Honigmann รุ่นRFS150-400 เซ็นเซอร์ความตึง, On-Line tension sensor,capacity :40 Kg / 400 N / 88 lbs

RFS® stands for enduring online precision. The specified and calibrated accuracy remains unchanged throughout the unit’s service life and, across wide ranges, is independent of

• the force introduction point, i.e. the sensor is not affected by lever arm action
• any axial tilt torques which might appear
• direct axial forces

The functional principle makes for superb sensitivity while at the same time offering enormous performance capabilities. The force acting radially at the bearing journal, along the measurement vector, causes a microscopically small, elastic deformation of the complex load cell. The deformation is registered at an exactly pre-determined position by way of strain gauges and is then evaluated precise electronically.

The high mechanical stiffness of the load cell enables measurement with virtually no excursion. This tension measurement principle is based on the evaluation of the force applied radially and transferred to the sensor by way of the bearing journal. This force is determined by the reversing geometry and the line tension.

• Resolution of 0.1% and better
• Rugged stainless steel housing is environmentally sealed
• Threaded housing with lock-nuts permits easy mounting and simple alignment
• Overload protection up to 800%
• Wide variety of precision, ball-bearing mounted guide rollers are available
• Supplied with a 10 ft. (3 m) shielded cable. Optional lengths are available
• Custom sensor designs can be developed to meet specific applications requirements. Inquire.
• Existing rollers with 20-180 degree wrap angles can be used as measurement points for the RFS.