GatesUnitta รุ่น AT-1 เครื่องปรับสายพาน,Alignment adjustment machine,laser wavelength:635～670mm

          The alignment adjustment machine LASER AT-1 is a measuring device that allows you to easily check the parallelism and twist between the pulleys when installing the belt (timing belt/V-belt) and pulley.When the timing belt is driven, the belt does not stop at the center of the pulley, but always shifts to one side (due to the belt's side thrust characteristics) and stops when it hits the pulley flange. If the pulley alignment is bad, the belt will be pressed strongly against the flange, which will not only cause significant wear and damage to the end of the belt, but also cause it to ride on the flange and break. In addition, since the elongation of the core wire is very small, the greater the pulley alignment error, the greater the tension difference between both ends of the belt, and the shorter the belt life.Therefore, when installing the belt on the machine, adjust the pulley alignment as accurately as possible.

• Pulley alignment can be adjusted using a laser
• .This is an adjustment machine that can measure and correct pulley alignment using a laser.
  *LASER AT-1 is a class 2 laser device.
  When using the product, please read the instruction manual carefully and use it correctly.