Horiba รหัส HP-480 เครื่องวัดค่าpHชนิดติดตั้งบนแผง,Panel-mount Type pH Meter(4 Wire Transmission),Meas.range pH:0~14,Resolution:0.01pH

Horiba รหัส HP-480 เครื่องวัดค่าpHชนิดติดตั้งบนแผง,Panel-mount Type pH Meter(4 Wire Transmission),Meas.range pH:0~14,Resolution:0.01pH
รหัสสินค้า SKU-15585
หมวดหมู่ •เครื่องวัดค่าพีเอชและโออาร์พี(pH,ORP Meter)
ราคาปกติ 70,000.00 บาท
ลดเหลือ 0.00 บาท
สถานะสินค้า Pre-Order
ลงสินค้า 3 ก.ค. 2566
อัพเดทล่าสุด 19 ก.ย. 2568
คงเหลือ 1 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
หนังสือรับรองบริษัท
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
Tags : Horiba, HP-480
 

The HP-480 covers a wide range of usages such as monitoring industrial effluent, monitoring manufacturing processes in various industrial areas and quality inspections, as well as for fisheries industry and aquaculture industry.

  • Easy pH correction
    • After immersing the pH poles in the standard fluid, simply follow the instructions displayed and press the ENT key.  The automatic correction process is plain and simple.
  • Automatic diagnosis function for faults in electrode properties
    • If there is an asymmetry potential, sensitivity or response speed in correction, the HP-480 automatically determines whether there is a fault in the pH electrodes, and displays an error message.
  • Compatible with five types of temperature compensation element
    • Five types of temperature compensation element are supported: 500 Ω, 6.8 kΩ, 1 kΩ, 10 kΩ and 350 Ω.
  • A line-up of lead-free pH electrodes
    • Uses lead-free glass. In addition, almost all sections of the pH electrodes, including lead wires and soldered junctions are lead-free.
  • Uses lead-free solder
    • To reduce the burden on the environment, lead-free solder has been used to mount the components on the printed circuit board.

Product name

Industrial pH meter

Model

HP-480

Measuring range

0 pH to 14 pH: 0.01 pH resolution.
Temperature 0
to 100: 1 resolution (selectable display).

Transmission
output

4 mA to 20 mA DC: input/output isolated type
Maximum load resistance: 900 Ω

Transmission
output range

Free

Repeatability and
linearity

±0.05 pH, ±0.08 mA (for transmission output range of 0 pH to 14 pH)

Contact output

Outputs: 2 points
Alarm contact output (R1 and R2)
  Contact type: relay contact, SPDT (1c)
  Contact rating: 240 V AC, 3 A and 30 V DC, 3 A (resistance load)
  Contact function: selectable from upper/lower limit operation (ON/OFF control), alarm, and maintenance.

Calibration function

Two-point automatic calibration or manual calibration.
Two-point automatic calibration: with automatic validation of the electrode characteristics.
  Types of standard solution: pH 2, pH 4, pH 7, pH 9 and pH 10 (JIS)
  Combination of standard solutions: pH 7 and one of the others
  Manual calibration: Freely selectable, but the difference should be over 2 pH.
Temperature calibration (one point).

Transmission
output hold feature

  • Previous value hold
  • Optional value hold
  • Continuous
    Selectable from the above (However, only the previous value hold is available in the maintenance mode).

Self-diagnosis
function

  • Calibration function
    Asymmetry potential error, sensitivity error, response speed error and standard solution error.
  • Electrode self-diagnosis
    Temperature sensor short-circuit and temperature sensor disconnection.
  • Outside of the measuring range.
  • Converter error.

Temperature
compensation
element

Selectable from compensation ON (350Ω (25), 500Ω (25),1 kΩ (0)6.8 kΩ (25)
and 10 kΩ (25
)) and compensation OFF.

Temperature-
compensated
range

0 to 100

Ambient
temperature

−5 to 45

Relative humidity

20% to 85% (without dew condensation)

Storage
temperature

−25 to 65

Power supply

Rated voltage 100 V AC to 240 V AC, 50 Hz/60 Hz, 10 VA (max.)

Structure

Indoor-use panel installation type
  Panel case: ABS, Terminal: PBT
Panel: water proof structure

Protective structure

Panel: IP65 (IEC60529, JIS C0920)
Rear case: IP20, Terminal: IP00
Class II device (IEC61010-1)
Pollution level 2 (IEC61010-1)

Conforming
standards

CE Marking

EMC Directive: EN61326-1
Low Voltage Directive: EN61010-1
RoHS Directive: EN50581

Immunity (Industrial electromagnetic environment)
Noise increase ±0.2 pH or less

FCC Rule

FCC Part15

External
dimensions

48 (W)  × 96 (H)  × 115 (D) mm
Case depth: approx. 105 mm

Mass

Approx. 400 g

วิธีการสั่งซื้อสินค้า

ขั้นตอนที่ 1
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
ขั้นตอนที่2
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
ขั้นตอนที่ 3
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ขั้นตอนที่ 4
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
ขั้นตอนที่ 5
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
ขั้นตอนที่ 6
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

Contact us


ติดต่อสอบถาม #ภาษาไทย

Contact : Thai/English

หมวดหมู่สินค้า

เครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10270]
เครื่องวัดและเกจเช็คค่าความแข็ง(Hardness Tester) [93]
เครื่องวัดและทดสอบไฟฟ้า(Electrical test and Measurement) [113]
เครื่องวัดอุณหภูมิและความชื้น(Temperature&Humidity Meters) [240]
เครื่องวัดสำหรับงานสอบเทียบ(Calibration Instruments) [14]
เครื่องวัดและชุดทดสอบคุณภาพน้ำ(Water Quality) [170]
เครื่องวัดและบันทึกค่าข้อมูล(Data Logger) [79]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]

ระบบสมาชิก

พูดคุย-สอบถาม