Thai Baht Converterเครื่องมือวัดอุตสาหกรรม l Measuring Instruments [10259]
คุณสมบัติการใช้งานเครื่องมือวัด l Featured Products [872]
Kikusui รุ่นPWR2001H-2000Wแหล่งจ่ายไฟกระแสตรงขนาดกะทัดรัด,Compact wide-range DC power supply,Output:0～650V,0～9.25A
| รหัสสินค้า | SKU-15449 |
| หมวดหมู่ | เครื่องจ่ายไฟกระแสตรง(DC Power Supply) |
| ราคาปกติ | |
| ลดเหลือ | 0.00 บาท |
| สถานะสินค้า | Pre-Order |
| สภาพ | สินค้าใหม่ |
| ลงสินค้า | 26 มิ.ย. 2566 |
| อัพเดทล่าสุด | 26 มิ.ย. 2566 |
| คงเหลือ | 1 ชิ้น |
| จำนวน | ชิ้น |
หยิบลงตะกร้า
รายละเอียดสินค้า
PWR-01 series is a small, high-performance multi-functional small wide-range DC power supply. This product can automatically control the output through the sequence function. A computer is required to edit the program, and the sequence can be executed only by operating the panel after writing to the main unit (memory) of the power supply. And standard LAN (LXI), USB, RS232C communication interface required for system upgrade. In addition, as a desktop DC power supply, it is also equipped with front output terminals, internal resistance variable function, discharge ON/OFF function, CV/CC priority switching function, synchronous operation function, various protection functions, memory function, etc. Practical functions.
- Sequence function (supports triggered synchronization)
- Variable internal resistance function
- LAN (LXI compliant) /USB/RS232C as standard interface
- A virtual multi-channel bus (VMCB) function makes multi-channel operation more efficient
- A wide range of voltage and current settings can be combined within its output power rating (3 to 4 times)
- All models are equipped with front-facing output terminals as standard (maximum 10A)
- Supporting universal input voltage (85V to 265V)
- CONFIG setting shortcut function and display (Up to three parameters can be registered.)
- Setting preset memory function (3 combinations of settings for voltage, current, OVP, OCP, and UVL)
- Bleeder (sink) can be turned on/off, with an even stronger bleeder mode setting available
- Output-on/off delay function
- Soft start/stop function
| name | Compact wide range DC power supply PWR-01 series | |
|---|---|---|
| format | PWR2001H | |
| Basic function | Direct current power supply (DC) output from commercial power supply (AC100V, 200V) | |
| output | ||
| Rating | output power | 2000.0W |
| output voltage | 650.00V | |
| output current | 9.25A | |
| Voltage | Maximum voltage that can be set | 682.5V |
| Setting accuracy | ± (0.5% of set + 0.1% of rating) | |
| Setting resolution | 2500mV | |
| 100mV (FINE/OUTOFF), 10mV (FINE/OUTON), 0.1mV (when using communication interface) | ||
| Power fluctuation | ±67mV | |
| load change | ±67mV | |
| transient response | 3 ms or less | |
| ripple noise | 300mVp-p, 50mV (rms/measurement frequency band is 10Hz to 1MHz) | |
| rise time | 100ms or less (full load, no load) | |
| fall time | 250ms or less (full load), 2000ms (no load) | |
| Remote sensing maximum compensation voltage (one way) |
5V | |
| temperature coefficient | 100ppm/°C (in the range of ambient temperature 0°C to 50°C) | |
| current | Settable maximum current | 9.7125A |
| Setting accuracy | ± (0.5% of set + 0.1% of rating) | |
| Setting resolution | 50mA | |
| 10mA (FINE/OUTOFF) |
||
| 1mA (FINE/OUTON) |
||
| 0.1mA (when using communication interface) | ||
| Power fluctuation | ±2.9mA | |
| load change | ±6.9mA | |
| Ripple noise (rms) | 30mA | |
| rise time | 100ms (full load) | |
| fall time | 100ms (full load) | |
| current temperature coefficient | 100ppm/℃ | |
| Maximum settable internal resistance | 52.70Ω | |
| Display function | ||
| voltage display | Maximum display | 999.9 |
| Display accuracy | ±(0.2% of reading +5 digits) | |
| current display | Maximum display | 9.999 |
| Display accuracy | ±(0.5% of reading +8 digits) | |
| power display | Maximum display | 9999 |
| Display accuracy | Switch the display between the multiplication result of the current value and the voltage value | |
| PWR DSPL key lit (red) | ||
| AC input | ||
| Nominal input rating | 100 Vac to 240 Vac, 50 Hz to 60 Hz, single phase | |
| Input voltage range | 85Vac to 265Vac | |
| Input frequency range | 47Hz to 63Hz | |
| Current (TYP value) |
100Vac | 28.0A |
| 200Vac | 14.0A | |
| Inrush current (MAX) | 125A or less | |
| Power (MAX) | 2800VA | |
| Power factor (TYP value) | 0.99 (input voltage 100 V) / 0.97 (input voltage 200 V) | |
| Efficiency (MIN) | 75% or more | |
| Power failure holding time (MIN) | 20 ms or more | |
| protective function | ||
| Overvoltage protection (OVP) | Output off, OVP display, ALM lighting | |
| Setting range: 10% to 112% of rated output, setting accuracy: ±(1.5% of rating) | ||
| Overcurrent protection (OCP) | Output off, OCP display, ALM lighting | |
| 10% to 112% of rated output | ||
| Front output terminal overcurrent protection (FOCP) |
Output off, OCP display, ALM lighting | |
| 11A (TYP value) | ||
| Constant voltage limit (UVL) | Output off, OCP display, ALM lighting | |
| Setting range: 0% to 105% of rated output voltage | ||
| Overheat protection (OHP) | Output off, OHP display, ALM lighting | |
| Sensing Incorrect Connection Protection (SENSE) |
Output off, SENS display, ALM lighting | |
| Low AC input protection (AC-FAIL) |
Output off, AC indication, ALM lighting | |
| Shutdown (SD) | Output off, SD display, ALM lighting | |
| POWER LIMIT | ALM lighting, set value (fixed): about 105% of rated output power | |
| Communication monitoring (WATCHDOG) | Output off, WDOG display, ALM lighting | |
| Master-slave parallel operation protection (PRL ALM) |
Output off, PRL display, ALM lighting | |
| Signal output/input | ||
| Monitor signal output |
Voltage monitor (VMON) |
Selectable monitor voltage range: 0V to 5V or 0V to 10V |
| Setting accuracy: 2.5% of fs | ||
| Current monitor (IMON) |
Selectable monitor voltage range: 0V to 5V or 0V to 10V | |
| Setting accuracy: 2.5% of fs | ||
| Status signal output | OUT ON STATUS | On when output is on |
| CV STATUS | ON during CV operation | |
| CC STATUS | On during CC operation | |
| ALARM STATUS | ON when alarm is activated | |
| POWER ON STATUS | On when POWER is on | |
| trigger signal | Input (TRG IN) | Logic selectable: LOW (0V to 1.5V), HGH (3.5V to 5V) / Input impedance: 10kΩ (TYP value) |
| Output (TRG OUT) | Logic selectable: LOW (0V to 0.6V), HGH (4.2V to 5V) / Pulse width: 100μs (TYP value) | |
| Control function (external control) | ||
| Output voltage control (VPGM) | 0% to 100% of rated output voltage, selectable control voltage: 0V to 5V, or 0V to 10V Accuracy: 5% of rating |
|
| Output current control (IPGM) | 0% to 100% of rated output current, selectable control voltage: 0V to 5V, or 0V to 10V Accuracy: 5% of rating |
|
| Output ON/OFF control OUTPUT ON/OFF CONT | Logic selectable: LOW (0 V to 0.5 V) or short output on, HIGH (4.5 V to 5 V) or open output off HIGH (4.5 V to 5 V) or open output on, LOW (0 V to 0.5 V ) or output off by short circuit |
|
| Output shutdown control SHUT DOWN |
LOW (0V to 0.5V) or short circuit output off | |
| Alarm clear control ALM CLR | Alarm clear on LOW (0V to 0.5V) or short circuit | |
| Other features | ||
| Output on/off delay | Setting range: 0.0 s, 0.5 s to 99.9 s (factory setting: 0.0 s) Setting resolution: 0.1 s | |
| Soft start/soft stop | Setting range: 0.0 s, 0.5 s to 10.0 s (factory setting: 0.0 s) Setting resolution: 0.1 s | |
| Overcurrent protection (OCP) activation delay |
Setting range: 0.0 s to 2.0 s (factory setting: 0.0 s) Setting resolution: 0.1 s | |
| preset memory | Saves up to three combinations of voltage settings, current settings, OVP settings, OCP settings, and UVL settings | |
| key lock | Disable operations other than the OUTPUT key | |
| config shortcut | Register up to three config setting items to the SC1, SC2, and SC3 keys | |
| sequence | Number of programs: 1 Number of steps: 64 Number of repetitions: 1 to 99998, INFinity section Number of loops that can be configured: 16 Number of section loops: 2 to 99998 Step time: 0.1 s to 100 h (common to step transition/ramp transition) |
|
| Synchronous operation | Synchronize voltage and current settings, synchronize step restart of sequence program | |
| One-control parallel operation | Up to 2 units including the master unit (same model) | |
| Series operation | 2 units (same model) | |
| Multi- channel (VMCB) |
Connection between master unit and PC | LAN, USB, RS232C |
| Slave unit connection | LANs | |
| Operation display | ||
| OUTPUT ON/OFF | OUTPUT LED lights (green) when output is on | |
| Output on/off delay | ”DLY” lights when setting, ”DLY” blinks during operation OUTPUT LED blinks (orange) during output-on delay operation OUTPUT LED blinks (green) during output-off delay operation |
|
| Soft start/ soft stop | ”SS” lights when setting, ”SS” blinks during operation OUTPUT LED lights (green) during soft start operation OUTPUT LED blinks (green) during soft stop operation |
|
| CV operation | CV LED lights (green) | |
| CC operation | CC LED lit (red) | |
| alarm action | ALM LED lights up (red) when protection function is activated ALM LED blinks (red) when power limit is activated OUTPUT LED blinks (orange) when protection function is activated when output is on |
|
| preset memory | One of the PRESET A/B/C LEDs lights up (green) when recalling/saving preset memory | |
| key lock operation | LOCK LED lights up (green) when keys are locked | |
| remote operation | REMOTE LED lit (green) during remote control | |
| remote operation |
LAN operation | LAN LED Lighting/blinking (changes depending on the state) No Fault state (green), Fault state (red), Standby state (orange), WEB Identify state (green: blinking) |
| bleeder circuit | ”HB” lights when hyper bleeder is set | |
| Variable internal resistance (VIR) | ”VIR” lights when setting | |
| sequence | ”SEQ” lights while sequence is running, ”SEQ” blinks while waiting for trigger | |
| interface | ||
| Common specifications | software protocol | IEEE Std 488.2-1992 |
| command language | Conforms to SCPI Specification 1999.0 | |
| RS232C | hardware | Conforms to EIA232D specifications (excluding connectors) |
| RJ-45 connector [male] (conversion cable RD-8P/9P is optional) | ||
| Baud rate : 1 200, 2 400, 4800, 9600, 19200, 38400, 57 600, 115200 bps | ||
| Data length 8 bits, stop bit 1 bit, no parity bit | ||
| no flow control | ||
| program message terminator | LF when receiving, CR/LF when sending | |
| USB | hardware | Conforms to IEEE 802.3 100Base-TX/10Base-T Ethernet LXI Specification 2011 Ver.1.4 |
| IPv4, RJ-45 connector (Category 5, uses straight cable) | ||
| program message terminator | LF or EOM for reception, LF + EOM for transmission | |
| device class | Compliant with USBTMC-USB488 Device Class Specification | |
| LANs | hardware | Conforms to IEEE 802.3 100Base-TX/10Base-T Ethernet LXI Specification 2011 Ver.1.4 |
| IPv4, RJ-45 connector (Category 5, uses straight cable) | ||
| Communication protocol | VXI-11, SCPI-RAW, HiSLIP | |
| program message terminator | VXI-11, HiSLIP: LF or END when receiving, LF + END when sending SCPI-RAW: LF when receiving, LF when sending | |
| General | ||
| Mass (body only) | about 13kg | |
| Dimensions (WxTxD) | 450×153×420mm | |
| Environmental condition | Operating environment | Operating environment |
| operating temperature | operating temperature | |
| operating humidity | 20 %rh to 85 %rh (non-condensing) | |
| storage temperature | -10°C to +60°C | |
| storage humidity | 90 %rh or less (no condensation) | |
| Altitude | Up to 2000m | |
| cooling method | Forced air cooling by fan | |
| ground polarity | Can be grounded negatively or positively | |
| isolation voltage | L/ML/MH type: ±500 Vmax, H type: ±800 Vmax | |
| Withstand voltage | Primary — Between Chassis | No abnormality after applying 1500 Vac for 1 minute |
| primary to secondary | L / ML / MH type: 1650 Vac applied for 1 minute, no abnormality | |
| Secondary — inter-chassis | L / ML / MH type: 2300 Vdc, no abnormality after 1 minute | |
| insulation resistance | Primary — Between Chassis | 500 Vdc, 100 MΩ or more (70% or less) |
| primary to secondary | L / ML / MH type: 500 Vdc, 100 MΩ or more (70 % or less) | |
| Secondary — inter-chassis | L / ML / MH type: 500 Vdc, 40 MΩ or more (70 % or less) | |
| accessories | Instruction manual, short bar for chassis connection, M4 screw for output terminal, OUTPUT terminal cover, M8 screw for output terminal (L type, ML type), power cord (400W/800W model), INPUT terminal cover (1200W model), Ferrite core set (1200W model) |
|
| Electromagnetic Compatibility (EMC) | Conforms to the requirements of the following directives and standards EMC Directive 2014/30/EU, EN 61326-1 (Class A), EN 55011 (Class A., Group 1), EN 61000-3-2, EN 61000-3- 3 * Applicable conditions: All cables and wires connected to this product must be less than 3 m. |
|
| safety | Conforms to the requirements of the following directives and standards Low Voltage Directive 2014/35/EU, EN 61010-1 (Class I, pollution degree 2) |
|
วิธีการสั่งซื้อสินค้า
เลือกสินค้าที่คุณต้องการ โดยคลิกปุ่มสั่งซื้อ / หยิบลงตะกร้า
เมื่อเลือกสินค้าครบแล้ว ให้คลิกปุ่มสั่งซื้อสินค้าในตะกร้าสินค้า
กรอกรายละเอียดให้ครบถ้วน จากนั้นคลิกปุ่มยืนยันการสั่งซื้อ
ชำระค่าสินค้าและบริการ สามารถดู วิธีการชำระเงินได้ที่นี่
แจ้งการชำระเงินผ่านทางหน้าเว็บไซต์ แจ้งชำระเงิน
เมื่อทางร้านตรวจสอบรายการชำระเงินเรียบร้อยแล้ว จะจัดส่งสินค้าให้คุณทันที
วิธีการชำระเงิน
ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน
ติดต่อสอบถาม #ภาษาไทย
Contact : Thai/English
เว็บเพื่อนบ้าน
ระบบสมาชิก
Realtools Asia(ศูนย์รวมเครื่องมือวัดและชุดทดสอบอุตสาหกรรม)
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ
สินค้าในตะกร้า ({{total_num}} รายการ)
ขออภัย ขณะนี้ยังไม่มีสินค้าในตะกร้า
ราคาสินค้าทั้งหมด
฿ {{price_format(total_price)}}
- ฿ {{price_format(discount.price)}}
ราคาสินค้าทั้งหมด
{{total_quantity}} ชิ้น
฿ {{price_format(after_product_price)}}
ราคาไม่รวมค่าจัดส่ง
➜ เลือกซื้อสินค้าเพิ่ม