• High Speed Weighing- 2000 updates per second
• Tri Coloured Display- Immediate recognition of the test status
• 5 Level Comparator- Multi level settings for a multi level test procedure
• Displayed Upper and Lower Setting-Immediate recall of test parameters
• 4 Different Hold Functions-Select from Peak, Bottom, Sample and Bipolar Hold
• Wide Variety of Standard Data I/O- select from an Analog Amplifier Voltage Output (+/-10v), D/A Analog Voltage Output (+/-10v), a Comparator Output and a Modbus RTU I/O
• Anti Chatter Functions-Prevents chatter effect demand on the comparator output
• Dimensions: 96mm x 168mm x 96mm

Measurement points
|
1
|
Sensor type
|
Strain gauge sensors (Output resistance: 10kΩ or lower)
|
Sensor power supply
|
The voltage applied to the bridge can be switched in the function settings. 5V : Up to 4 sensors of 350Ω can be connected. 2.5V : Up to 2 sensors of 120Ω or up to 8 of 350Ω can be connected.
|
Calibration method
|
Digital span (without actual loading) Calibration with actual load
|
Measurement range
|
Zero adjustment range : Approx. ±50% of span adjusted value Span adjustment range : ±0.25mV/V to ±3mV/V Minimum guaranteed input sensitivity : 0.6µ V/d Minimum guaranteed display sensitivity : 0.12µ V/d
|
Maximum display
|
±999999
|
Linearity
|
0.02% F.S. within ±1 digit
|
Analog-to-digital conversion
|
2000 times/sec.
|
Temperature coefficient
|
Zero : ±0.5µ V/°C (Typ.) Span : ±30ppm/°C (Typ.)
|
Display panel
|
Measurement data display : 7-segment 6-digit tricolor LED Character size : 14mm 15 Status marks Upper/lower limit indicators : Both with 7-segment 5-digit green LED Character size : 9 mm Number of key switches : 6
|



