DC Output Ratings:
• Maximum 150 W
• Output voltage: ±15 V
• Resolution: 1 mV
• Output current: ±10 A
• Resolution: 1 mA
• Ripple (20 Hz-20 MHz): <4 mVpp/1 mVrms
Setup Accuracy:
• Voltage: <0.02% + 3 mV
• Current: <0.05% + 5 mA
Feature set:
• Four quadrant operation
• Ultrafast transient response time < 20μs
• Full load rising time to 500 μs
• Accurate Battery Simulation
• Battery charge/load
• Oscilloscope waveform display (DSO)
• High resolution color display
• Built-in high accuracy DVM
• PC software available
• Variable output impedance 0-1Ω
• LED test function
• List function achieves voltage/current output as programmed
Connectivity:
• LAN and USB
• SCPI programming
IT6400 is a high speed linear DC source, which provides bipolar output and four quadrant operation. This means it can operate as source and load.
The maximum output voltage of a single channel is up to ± 60 V. Maximum output current is up to ± 10 A. Maximum voltage and current depends on model number.
The unique bipolar voltage/current output means the IT6400 series can be used as a bipolar power source or a bipolar electronic load. The battery simulating function is useful for development and production testing of portable, battery-operated devices. IT6400 has ultrafast transient time of less than 50 us.




- IT6411 is a single-channel bipolar DC source. Dual range source. Maximum 45 W, ±15 V, ±5 A
- IT6411S is a single-channel bipolar DC source with uA setting and nA readback resolution. Maximum 1.5 W, ±15 V, ±0.1 A
- IT6412 is a dual-channel bipolar DC source with two independent output channels. CH1: 45 W, ±15V, ±5A - CH2: 45 W, 15V, ±5A
- IT6431 is a single-channel bipolar DC source. Dual range source. Maximum 150 W, ±15 V, ±10 A
- IT6432 is a single-channel bipolar DC source. Dual range source. Maximum 150 W, ±30 V, ±5 A
- IT6433 is a single-channel bipolar DC source. Dual range source. Maximum 150 W, ±60 V, ±2.5 A